CoChat

Sustainability through the Digitalization of Industrial Machines: Complementary Factors of Fuel Consumption and Productivity for Forklifts with Sensors

Open access
Pashkevich, Natallia, Haftor, Darek, Karlsson, Mikael, Chowdhury, Soumitra · 2019 · Sustainability

The DOI matches its Crossref record; 57 of the 58 references it cites were found in a registry or an index.

Abstract

Increasing the fuel efficiency of industrial machines through digitalization can enable the transport and logistics sector to overcome challenges such as low productivity growth and increasing CO2 emissions. Modern digitalized machines with embedded sensors that collect and transmit operational data have opened up new avenues for the identification of more efficient machine use. While existing studies of industrial machines have mostly focused on one or a few conditioning factors at a time, this study took a complementary approach, using a large set of known factors that simultaneously conditioned both the fuel consumption and productivity of medium-range forklifts (n = 285) that operated in a natural industrial setting for one full year. The results confirm the importance of a set of factors, including aspects related to the vehicles’ travels, drivers, operations, workload spectra, and contextual factors, such as industry and country. As a novel contribution, this study shows that the key conditioning factors interact with each other in a non-linear and non-additive manner. This means that addressing one factor at a time might not provide optimal fuel consumption, and instead all factors need to be addressed simultaneously as a system.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/su11236708

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Distribution of vehicles among industry segments. Figure 1. Distribution of vehicles among industry segments.
Figure 1 Distribution of vehicles among industry segments. Figure 1. Distribution of vehicles among industry segments.CC-BY · From the PDF
Figure 2 Bar loads of the most relevant variables for fuel consumption per time (liter/day, liter/hour). Figure 2. Bar loads of the most relevant variables for fuel consumption per time (liter / day, liter / hour).
Figure 2 Bar loads of the most relevant variables for fuel consumption per time (liter/day, liter/hour). Figure 2. Bar loads of the most relevant variables for fuel consumption per time (liter / day, liter / hour).CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Figure 3 Bar loads of the most relevant variables for fuel consumption and productivity (liter/load, liter/ton, liter/ton-meter). Figure 3. Bar loads of the most relevant variables for fuel consumption and productivity (liter / load, liter / ton, liter / ton-meter).
Figure 3 Bar loads of the most relevant variables for fuel consumption and productivity (liter/load, liter/ton, liter/ton-meter). Figure 3. Bar loads of the most relevant variables for fuel consumption and productivity (liter / load, liter / ton, liter / ton-meter).CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure A1. Cont.
Figure A1. Cont.CC-BY · From the PDF
Figure A1. Normal probability plots of the most relevant variables for fuel consumption (liter/day, liter/hour, liter/load, liter/ton, liter/ton-meter). The data that did not follow the straight line were used to find cut-off limits in order to select important variables for fuel consumption. Figure A1. Normal probability plots of the most relevant variables for fuel consumption (liter / day, liter / hour, liter / load, liter / ton, liter / ton-meter). The data that did not follow the straight line were used to find cut-o limits in order to select important variables for fuel consumption.
Figure A1. Normal probability plots of the most relevant variables for fuel consumption (liter/day, liter/hour, liter/load, liter/ton, liter/ton-meter). The data that did not follow the straight line were used to find cut-off limits in order to select important variables for fuel consumption. Figure A1. Normal probability plots of the most relevant variables for fuel consumption (liter / day, liter / hour, liter / load, liter / ton, liter / ton-meter). The data that did not follow the straight line were used to find cut-o limits in order to select important variables for fuel consumption.CC-BY · From the PDF
Figure A2. Cont.
Figure A2. Cont.CC-BY · From the PDF
Image 10
CC-BY · From the PDF
Figure A2. Cont.
Figure A2. Cont.CC-BY · From the PDF
Figure A2. The choice of partial least-squares factors based on explained variance, preserving the essence of the original data (liter/day, liter/hour, liter/load, liter/ton, liter/ton-meter). Those factors that accounted for little variation were excluded from the analysis. Figure A2. The choice of partial least-squares factors based on explained variance, preserving the essence of the original data (liter / day, liter / hour, liter / load, liter / ton, liter / ton-meter). Those factors that accounted for little variation were excluded from the analysis.
Figure A2. The choice of partial least-squares factors based on explained variance, preserving the essence of the original data (liter/day, liter/hour, liter/load, liter/ton, liter/ton-meter). Those factors that accounted for little variation were excluded from the analysis. Figure A2. The choice of partial least-squares factors based on explained variance, preserving the essence of the original data (liter / day, liter / hour, liter / load, liter / ton, liter / ton-meter). Those factors that accounted for little variation were excluded from the analysis.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 2

  1. Boenzi, F., Digiesi, S., Facchini, F., Mossa, G., and Mummolo, G. (2015, January 16–18). Sustainable Warehouse Logistics: A NIP Model for Non-Road Vehicles and Storage Configuration Selection. Proceedings of the XX Summer School “Francesco Turco—Operational, Excellence, Experiences”, Naples, Italy.
  2. Caraman, D., and Constantin, I. (2016). Sustainable transport. Designing Mobility and Transport Services, Routledge.

Cited by

See all 20

Metadata

Authors
Pashkevich, N., Haftor, D., Karlsson, M., & Chowdhury, S.
Affiliations
  • Södertörn University (SE)
  • Uppsala University (SE)
  • Research Manager, Bestwood AB, 172 75 Sundbyberg, Sweden
  • Linnaeus University (SE)
Corresponding author
Haftor, Darek
Venue
Sustainability
Publisher
MDPI AG
Published
2019-11-27
Volume
11
Issue
23
Pages
6708
ISSN
2071-1050 (ISSN-L)
OpenAlex
W2990253051
Cited by
20
References
58
Citations by year
2026: 1 · 2025: 5 · 2023: 5 · 2022: 6 · 2021: 3
FWCI
0.48
Type
journal article
Language
en
Open access
Locations
  • Sustainability (publishedVersion, cc-by)
  • DiVA (Linnaeus University) (submittedVersion, other-oa)
  • KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
  • RePEc: Research Papers in Economics (submittedVersion)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Energy Efficiency and Management
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Transport and Logistics Innovations
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Manufacturing and Logistics Optimization
Keywords
forklifts, fuel consumption, productivity, industrial machinery, digitalization, embedded sensors, machine data, CO2 emissions, transport and logistics, driver behavior, nonlinear interactions

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.