The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Potential Development of Sustainable 3D-Printed Meat Analogues: A Review
Open accessAbstract
To mitigate the threat of climate change driven by livestock meat production, a multifaceted approach that incorporates dietary changes, innovative product development, advances in technologies, and reductions in food wastes/losses is proposed. The emerging technology of 3D printing (3DP) has been recognized for its unprecedented capacity to fabricate food products with intricate structures and reduced material cost and energy. For sustainable 3DP of meat substitutes, the possible materials discussed are derived from in vitro cell culture, meat byproducts/waste, insects, and plants. These material-based approaches are analyzed from their potential environmental effects, technological viability, and consumer acceptance standpoints. Although skeletal muscles and skin are bioprinted for medical applications, they could be utilized as meat without the additional printing of vascular networks. The impediments to bioprinting of meat are lack of food-safe substrates/materials, cost-effectiveness, and scalability. The sustainability of bioprinting could be enhanced by the utilization of generic/universal components or scaffolds and optimization of cell sourcing and fabrication logistics. Despite the availability of several plants and their byproducts and some start-up ventures attempting to fabricate food products, 3D printing of meat analogues remains a challenge. From various insects, powders, proteins (soluble/insoluble), lipids, and fibers are produced, which—in different combinations and at optimal concentrations—can potentially result in superior meat substitutes. Valuable materials derived from meat byproducts/wastes using low energy methods could reduce waste production and offset some greenhouse gas (GHG) emissions. Apart from printer innovations (speed, precision, and productivity), rational structure of supply chain and optimization of material flow and logistic costs can improve the sustainability of 3D printing. Irrespective of the materials used, perception-related challenges exist for 3D-printed food products. Consumer acceptance could be a significant challenge that could hinder the success of 3D-printed meat analogs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jayathilakan, K., Sultana, K., Radhakrishna, K., & Bawa, A. S. (2012) · Journal of Food Science and Technology · doi:10.1007/s13197-011-0290-7 · Cited by 1,001
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Environmental impacts of cultured meat production
Tuomisto, H. L., & Teixeira de Mattos, M. J. (2011) · Environmental Science & Technology · doi:10.1021/es200130u · Cited by 891
Nonmeat Protein Alternatives as Meat Extenders and Meat Analogs
Asgar, M. A., Fazilah, A., Huda, N., Bhat, R., & Karim, A. A. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00124.x · Cited by 505
Eshel, G., Shepon, A., Makov, T., & Milo, R. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1402183111 · Cited by 466
Dick, A., Bhandari, B., & Prakash, S. (2019) · Meat Science · doi:10.1016/j.meatsci.2019.03.005 · Cited by 264
Cited by
Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges
Bomkamp, C., Skaalure, S. C., Fernando, G. F., Ben‐Arye, T., Swartz, E. W., & Specht, E. A. (2022) · Advanced Science · doi:10.1002/advs.202102908 · Cited by 349
Hadi, J., & Brightwell, G. (2021) · Foods · doi:10.3390/foods10061226 · Cited by 332
A 3D Food Printing Process for the New Normal Era: A Review
Lee, J. (2021) · Processes · doi:10.3390/pr9091495 · Cited by 112
Towards the development of foods 3D printer: Trends and technologies for foods printing
Neamah, H. A., & Tandio, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e33882 · Cited by 43
“Bio-printing technique is based on tissue engineering [4], which is utilizing cells to develop food [50,90].”
Background
Metadata
- Authors
- Ramachandraiah, K.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2021-01-18
- Volume
- 13
- Issue
- 2
- Pages
- 938
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3121835879
- Cited by
- 178
- References
- 6
- FWCI
- 16.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Potential Development of Sustainable 3D-Printed Meat Analogues: A Review. https://app.cochat.ai/papers/10.3390/su13020938
- The paper
- Ramachandraiah, K. (2021). Potential Development of Sustainable 3D-Printed Meat Analogues: A Review. Sustainability. https://doi.org/10.3390/su13020938
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.