Thermal Behavior Modeling of Lithium-Ion Batteries: A Comprehensive Review
Open accessThe DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Abstract
To enhance our understanding of the thermal characteristics of lithium-ion batteries and gain valuable insights into the thermal impacts of battery thermal management systems (BTMSs), it is crucial to develop precise thermal models for lithium-ion batteries that enable numerical simulations. The primary objective of creating a battery thermal model is to define equations related to heat generation, energy conservation, and boundary conditions. However, a standalone thermal model often lacks the necessary accuracy to effectively anticipate thermal behavior. Consequently, the thermal model is commonly integrated with an electrochemical model or an equivalent circuit model. This article provides a comprehensive review of the thermal behavior and modeling of lithium-ion batteries. It highlights the critical role of temperature in affecting battery performance, safety, and lifespan. The study explores the challenges posed by temperature variations, both too low and too high, and their impact on the battery’s electrical and thermal balance. Various thermal analysis approaches, including experimental measurements and simulation-based modeling, are described to comprehend the thermal characteristics of lithium-ion batteries under different operating conditions. The accurate modeling of batteries involves explaining the electrochemical model and the thermal model as well as methods for coupling electrochemical, electrical, and thermal aspects, along with an equivalent circuit model. Additionally, this review comprehensively outlines the advancements made in understanding the thermal behavior of lithium-ion batteries. In summary, there is a strong desire for a battery model that is efficient, highly accurate, and accompanied by an effective thermal management system. Furthermore, it is crucial to prioritize the enhancement of current thermal models to improve the overall performance and safety of lithium-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“In practice, Ah-integration with periodic OCV correction remains common due to simplicity [11] but is sensitive to initial SOC errors and sensor drift, leading to cumulative inaccuracies [12].”
From A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries (2025) · cites this paper as [12]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987 · cited 1×
“Vetter J et al. [62] conducted a comprehensive review and evaluation of aging mechanisms in lithium-ion batteries, likely covering capacity fade, calendar aging, and performance degradation over time.”
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192 · cited 2×
“The following points delve into each of these components: 1.”
Mitigating Thermal Runaway of Lithium-Ion Batteries
Feng, X., Ren, D., He, X., & Ouyang, M. (2020) · Joule · doi:10.1016/j.joule.2020.02.010 · Cited by 1,735
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408 · cited 1×
“Arora P et al. [59] conducted a study focusing on the capacity loss or fade observed in lithium-ion batteries during cycling.”
Main aging mechanisms in Li ion batteries
Broussely, M., Biensan, P., Bonhomme, F., Blanchard, P., Herreyre, S., Nechev, K., & Staniewicz, R. J. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.172 · Cited by 1,159 · cited 1×
“M. Broussely et al. [61] discussed aging mechanisms in Li-ion batteries during rest or cycling based on long-term storage or cycling data.”
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097 · cited 1×
“Zhang and colleagues [13] extensively investigated the thermal effects experienced by LIBs, including thermal runaway and battery performance in cold temperatures.”
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877 · cited 3×
“Kim et al. [43] conducted a study specifically focused on the thermal abuse behavior of large-format Li-ion batteries designed for automotive applications.”
Thermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746 · cited 3×
“The studies conducted by Gu et al. [44], Liu et al. [45], and Cao et al. [46] focused on different aspects of battery modeling and optimization for improved performance and economic charging.”
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706 · cited 1×
“The comprehensive review by Aurbach et al. [60] focused on the interactions between cathode materials and electrolyte solutions in lithium-ion batteries.”
Research works printed but not linked: 3
- Pour, M.Y. (2015). Electrothermal Modeling of Lithium-Ion Batteries. [Ph.D. Thesis, Bahonar University].
- Scrosati, W.A. (2002). Advances in Lithium-Ion Batteries, Springer Science & Business Media.
- Ehrlich, G.M. (2001). Handbook of Batteries, McGraw-Hill.
Cited by
A Comprehensive Review on Lithium-Ion Battery Lifetime Prediction and Aging Mechanism Analysis
Madani, S. S., Shabeer, Y., Allard, F., Fowler, M., Ziebert, C., Wang, Z., Panchal, S., Chaoui, H., Mekhilef, S., Dou, S. X., et al. (2025) · Batteries · doi:10.3390/batteries11040127 · Cited by 171
Self-citationYu, H., Zhang, H., Zhang, Z., & Yang, S. (2025) · eTransportation · doi:10.1016/j.etran.2025.100420 · Cited by 86
Nanotechnology-Based Lithium-Ion Battery Energy Storage Systems
Asamoah, G. A., Korsah, M. A., Jeyasundar, P. G. S. A., Ahmed, M., Lau, S. Y., & Danquah, M. K. (2024) · Sustainability · doi:10.3390/su16219231 · Cited by 78
“A brief description of certain key standalone thermal analysis techniques is discussed in Section 4.1, which highlights their significance and applications in previous studies on nanotechnology-based Li-ion batteries.”
InfluentialShi, D., Cui, Y., Shen, X., Gao, Z., Ma, X., Xu, L. H., Fang, Y., Wang, S., & Fang, S. E. (2025) · RSC Advances · doi:10.1039/d5ra00934k · Cited by 73
Critical review of battery health state estimation with deep learning methods
Wang, S., Zhang, M., Zhou, L., Fernández, C., & Blaabjerg, F. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.239106 · Cited by 37
Battery Reliability Assessment in Electric Vehicles: A State-of-the-Art
Omakor, J., Miah, S., & Chaoui, H. (2024) · IEEE Access · doi:10.1109/access.2024.3406424 · Cited by 36
A Review of Parameter Identification and State of Power Estimation Methods for Lithium-Ion Batteries
Ma, C., Wu, C. Q., Wang, L., Chen, X., Liu, L., Wu, Y., & Ye, J. (2024) · Processes · doi:10.3390/pr12102166 · Cited by 33
Investigation of Convective and Radiative Heat Transfer of 21700 Lithium-Ion Battery Cells
Kovács, G., Szürke, S. K., & Fischer, S. (2025) · Batteries · doi:10.3390/batteries11070246 · Cited by 35
Flexible and wearable energy technologies: A lithium-ion battery perspective
YARAR, G., AKYÜZ, E. S., Aydın, Ö., Telli, E., & Farsak, M. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.180103 · Cited by 26
A coupled multi-physics study on Li-ion batteries under impact loading
Mirjavadi, S. S., Huang, J., Lu, G., & Steven, G. P. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126239 · Cited by 19
High‐Safety Design of Organic Electrolytes for Sodium‐Ion Batteries
Sun, S., Guan, Z., Feng, Y., Hu, L., Zhang, X., Liu, M., & Wang, P. (2025) · ChemSusChem · doi:10.1002/cssc.202501336 · Cited by 16
Predicting temperature of a Li-ion battery under dynamic current using long short-term memory
Han, J., Seo, J., Kim, J., Koo, Y., Ryu, M., & Lee, B. J. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105246 · Cited by 16
Wang, C., Wu, C. Q., Yi, J., Su, X., Cao, X., & Zhang, K. (2025) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2025.101001 · Cited by 14
Sun, T., Yan, Y., Sui, J., Wang, X., Rasool, G., & Zhang, K. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116828 · Cited by 14
Electro-Thermal Modeling and Parameter Identification of an EV Battery Pack Using Drive Cycle Data
Mannapperuma, V., Gaddala, L. C., Zheng, R., Kim, D.-H., Kim, Y., Ullal, A., Zhu, S., & Ha, K. P. (2025) · Batteries · doi:10.3390/batteries11090319 · Cited by 13
“Despite their simplicity, these models are widely recognized in the literature for offering a good balance of accuracy and computational efficiency [9,10].”
Li, Y., Wang, H., Wang, C., Wang, L., Liao, C., & Yang, J. (2025) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2025.110337 · Cited by 14
Khaleduzzaman, S., Wood, A., & Srivastava, A. K. (2025) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2025.3571436 · Cited by 11
Ferreira, P., & Tang, S. (2025) · Scientific Reports · doi:10.1038/s41598-025-16329-2 · Cited by 11
Thermal Optimization Strategies for Li-Ion Batteries: Predictive Temperature Algorithm
Antonio, M. (2024) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4065471 · Cited by 10
Das, K., Rawat, S., & Saini, D. K. (2025) · Clean Energy · doi:10.1093/ce/zkaf065 · Cited by 8
Kuzmanic-Reyes, E., Romero-Campos, J. P., & Calderón-Muñoz, W. R. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122093 · Cited by 6
Guo, C. Y., Muhieldeen, M. W., Teng, K. H., & Show, A. (2025) · Journal of Advanced Research in Numerical Heat Transfer · doi:10.37934/arnht.35.1.117161 · Cited by 6
MODELING THERMAL BEHAVIOR IN HIGH-POWER SEMICONDUCTOR DEVICES USING THE MODIFIED OHM’S LAW
Kimuya, A. M. (2024) · Eurasian Journal of Science Engineering and Technology · doi:10.55696/ejset.1463554 · Cited by 6
The Impact of Mechanical Failure of 18650 Batteries on the Safety of Electric Transport Operations
Bakowski, H., Przytuła, I., Cebulska, W., Hadryś, D., & Cwiek, J. (2024) · Energies · doi:10.3390/en17235980 · Cited by 6
Blyth, M., & Hales, A. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118856 · Cited by 4
Wang, H., Ngaopitakkul, A., & Yoomak, S. (2026) · Computation · doi:10.3390/computation14020047 · Cited by 5
Ahmad, H., Prabakaran, R., & Kim, S. E. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-15302-z · Cited by 8
Dai, Y., Ting, Y.-C., Chang, C. M., & Huang, C.-T. (2025) · Next Energy · doi:10.1016/j.nxener.2025.100465 · Cited by 4
Nogdhe, Y., Garg, R., & Singh, S. K. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-28-0068 · Cited by 4
Nosrati, H., Izneid, B. A., Rao, R., Mahapatro, A., Karthikeyan, A., Gill, H. S., & Bisht, Y. S. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae482e · Cited by 3
A Review of Failure Modes and Safety Strategies of Lithium‐Ion Batteries from Materials to Systems
Yang, J. H., Sung, J. Y., Kweon, H., Kim, S. K., Kim, B., Kim, J., Mun, J., Kim, J. H., & Kim, K. J. (2026) · Advanced Science · doi:10.1002/advs.76228 · Cited by 6
Cooling Characteristics and Optimization of an Air-Cooled Battery Pack
Zhang, J., Liu, T., Dai, H., & Lin, J. (2025) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2025-01-7016 · Cited by 3
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries
Li, X., Wu, G., Chang, F., Xia, W., Sun, S., & Shen, Y. (2025) · Batteries · doi:10.3390/batteries11120446 · Cited by 2
“In practice, Ah-integration with periodic OCV correction remains common due to simplicity [11] but is sensitive to initial SOC errors and sensor drift, leading to cumulative inaccuracies [12].”
Review of metallothermic method silicon reduction to improve lithium-ion battery performance
Birawidha, D. C., Manaf, A., Astuti, W., Daulay, A., Huda, M., Susanti, D., & Bahfie, F. (2025) · Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy · doi:10.1177/25726641251336911 · Cited by 2
“…one of the results shows that cycling at high temperatures can reduce battery capacity, especially at the cathode, through analysis using diagnostic techniques such as XRD and Raman, 7,8 to the development of battery material recycling methods to support the sustainability of the battery industry.”
Ceylan, D., Kulzer, A. C., Winterholler, N., Weinmann, J., & Schiek, W. (2025) · SAE International Journal of Advances and Current Practices in Mobility · doi:10.4271/2025-01-0523 · Cited by 2
Berwal, P., Mehrotra, A., Lee, Y., & Yoh, J. J. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238614 · Cited by 2
Electrode-Level Emulation of Temperature Impact in Commercial Li-Ion Batteries
Dubarry, M., Fernando, A., & Beck, D. (2026) · Batteries · doi:10.3390/batteries12050175 · Cited by 2
“The modeling of the impact of temperature in lithium-ion batteries is a vast topic where multiple approaches have already been reported [22–30].”
Oyekola, E., Swan, L. G., & Dahn, J. R. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116803 · Cited by 1
Sagar, D., Ravichandran, S., & Ramar, R. (2025) · Thermo · doi:10.3390/thermo5030035 · Cited by 1
“A primary determinant of a battery’s thermal behavior is the discharge rate, or C-rate, which dictates the current magnitude and, consequently, the extent of internal resistive heating [7].”
Shega, E., Yılmaz, M., & Ergene, L. T. (2025) · IEEE Access · doi:10.1109/access.2025.3624875 · Cited by 1
“Further, the impact that low-temperature charging has on cell aging is addressed, considering the suspicion raised about the acceleration of cell aging under these conditions [17], [27], [28].”
A Reduced-Order Model for Battery Thermal Management with Varying Flow Rates
Rao, J., Zhang, S., Shi-hu, M., Hu, X., & Chen, G. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259588 · Cited by 1
“These models capture intricate battery geometries and cooling paths, accurately predicting internal temperature distributions [2], [3], [4], [5].”
Using Digitalization to Reduce Laboratory Testing Time for Lithium-Ion Cells
Duda, P., Konieczny, M., & Bielaczyc, P. (2026) · Energies · doi:10.3390/en19020312 · Cited by 1
AI-enabled cross-scale modeling and parameter transfer for lithium-ion batteries
Hu, Y., Xie, Y., Zhao, L., Zhu, X., Meng, W., Zhu, Z., Chen, X., Qiu, J., Ming, H., & Zhang, H. (2026) · Energy storage materials · doi:10.1016/j.ensm.2026.105222 · Cited by 2
Recent advances and challenges in electric vehicle Li-ion battery cooling systems
Nandakishora, Y. (2026) · Next Energy · doi:10.1016/j.nxener.2026.100720 · Cited by 1
Lodwik, D., & Sarniak, M. T. (2026) · Applied Sciences · doi:10.3390/app16146931 · Cited by 1
Yao, Z., Wang, J., & Zhang, Y. (2023) · SAE International Journal of Electrified Vehicles · doi:10.4271/14-13-03-0020 · Cited by 1
Analysis of a stand alone battery-converter device from a simulative systems engineering perspective
Liebig, G., Geißendörfer, S., Schuldt, F., & von Maydell, K. (2024) · Energy Reports · doi:10.1016/j.egyr.2024.03.053
Thangaraju, S., Meenakshi, N., & Ganesan, M. (2025) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2025-01-8165
Thermal Simulation Analysis of LFP Battery
Xu, R., Wu, H., Wang, X., Zhang, B., Liu, D., & Zou, G. (2025) · International Conference on Green Energy and Power Systems (ICGEPS) · doi:10.1109/icgeps65133.2025.11034414
“Additionally, low-temperature environments significantly increase internal resistance, reduce usable capacity, and accelerate aging[2], [3].”
RESEARCH OF CHARACTERISTICS OF THE BATTERY USED ON HYBRID VEHICLES
Vo, L. K. T., Nguyen, X. N., Vo, H. P., Dang, T. P., Nguyen, K. N., & Tran, T. T. (2025) · JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES · doi:10.26782/jmcms.2025.11.00006
High-Precision Modeling and Measurement of Core Temperature in Lithium-Ion Battery Cells
Kim, C., Jeong, Y., Kowalewski, S., & Dey, S. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11260355
Modelling of lithium batteries to determine their operation
Yu, P. (2024) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · Cited by 1
Electrochemical and chemical dynamics of LiFePO4 pouch cells at low temperatures through 3D modeling
Sead, F. F., Jain, V. D., Ballal, S., Singh, A. C., Gupta, S., Sharma, G. C., Bhakuni, P. N., & Nikpendar, A. (2025) · Chemical Papers · doi:10.1007/s11696-025-04576-6
Review of Optimization‐Based Sensor Fault Detection for Lithium‐Ion Batteries in Electric Vehicles
Devi, S. M., & Bagyaveereswaran, V. (2026) · Wiley eBooks · doi:10.1002/9781394288342.ch15
Jiang, M., Ju, C., Wang, X., Luo, X., Xu, X., & Zhao, C. (2025) · China Automation Congress (CAC) · doi:10.1109/cac67268.2025.11487455
Research Progress on Fiber‐Optic Operando Monitoring in Lithium‐Ion Batteries
Chen, H., Sun, H., Huang, G., Muya, F. N., Zhang, F., & Dong, J. (2026) · Batteries & Supercaps · doi:10.1002/batt.70358
An Open Source Design Exploration Tool for Battery and Coolant Configuration
Tosoni, F., Chen, Y. Y., Poncino, M., Fummi, F., & Vinco, S. (2026) · Design, Automation, and Test in Europe · doi:10.23919/date69613.2026.11539482
“Current modeling approaches require sacrificing either accuracy or computational efficiency, and this trade-off limits the ability of engineers to explore multiple design alternatives quickly [3].”
Predictive Modeling of Lithium-Ion Battery During Discharging Stage Using CNN-DenseNet and LSTM
Wartam, M., Ramadhan, Y. R., Yassin, H., Taufik, T., & Fitriawan, R. (2026) · Advanced Mechanical and Mechatronic Systems · doi:10.53623/amms.v2i2.1040
“Recent developments have highlighted machine learning frameworks for capacity loss prediction, which significantly improve the accuracy of degradation models through effective feature selection strategies [7–8].”
Mishra, S., Swain, S. C., Mayaluri, Z. L., Sahoo, P. K., & Samantaray, A. K. (2026) · Scientific Reports · doi:10.1038/s41598-026-44025-2
“The notation used in the manuscript, including Acronyms and abbreviations, Roman symbols, Greek symbols, and subscript/superscript conventions, is summarized in Tables 8, 9, 10, and 11.”
Battery Thermal Management Analysis for Electric Vehicles: A Simulation Approach
Kaur, S., Devi, R., & Mishra, P. K. (2026) · International Conference on Electrical and Electronics for Sustainable Innovations (ICEESI) · doi:10.1109/iceesi68020.2026.11582949
“On the other hand, temperatures higher than 35 °C may cause an irreversible reaction throughout the Li-ion battery pack and raise the possibility of thermal runaway [12].”
Hemalatha, M., & Sampoornam, K. P. (2026) · Research Square · doi:10.21203/rs.3.rs-10224359/v1
Lorbeck, R., Robin, O., & Christian, T. (2026) · Automotive and Engine Technology · doi:10.1007/s41104-026-00174-0
“[12] provides an overview of the numerical methods underlying thermal modelling as well as the experimental methodology for analysing the heat release of a lithium-ion cell.”
Ai, L., Lu, H., Li, X., Ru, H., Chen, X., & Teo, K. L. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132592
Rathore, Y. K., Tharewal, S., Upreti, K., Sivaneasan, B., & Kshirsagar, P. (2026) · Lecture notes in networks and systems · doi:10.1007/978-3-032-28310-8_30
An efficient analytical model for stress-induced capacity fade in pouch lithium-ion batteries
Huang, Z., Liu, H., Zou, W., Yang, T., Shi, Y., Wang, H., Yang, W., & Wu, S. (2026) · Applied Energy · doi:10.1016/j.apenergy.2026.128612
Motevasseli, F., Vajdi, M., Naderi, M., Vaferi, K., Hosseinzadeh, P., & Gholizadeh, T. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112581
Babu, A., Parag Jose, C., Gielinger, S., & Gunther, B. (2026) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet69291.2026.11686916
Lin, M., Wang, Q., Liang, Z., Yu, Y., Liu, Q., Lin, S., & Zhao, Y. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133185
Zhang, S., Zhang, L., Zhang, T., Tan, P., Wu, T., Liang, Y., & Liu, X. A. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.241732
Wang, W., Zhang, L., Wang, J., 任振潮, & Meng, J. (2026) · Batteries · doi:10.3390/batteries12100437
Chahine, K., Kanj, H., Khaled, M., & Noura, H. (2026) · Energy and AI · doi:10.1016/j.egyai.2026.100937
Metadata
- Authors
- Madani, S. S., Ziebert, C., & Marzband, M.
- Affiliations
- Karlsruhe Institute of Technology (DE)
- Teesside University (GB)
- Corresponding author
- Madani, Seyed Saeed
- Venue
- Symmetry
- Publisher
- MDPI AG
- Published
- 2023-08-17
- Volume
- 15
- Issue
- 8
- Pages
- 1597
- ISSN
- 2073-8994 (ISSN-L)
- OpenAlex
- W4385948991
- Cited by
- 65
- References
- 75
- Citations by year
- 2026: 24 · 2025: 31 · 2024: 9 · 2023: 1
- FWCI
- 4.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Symmetry (publishedVersion, cc-by)
- Repository KITopen (Karlsruhe Institute of Technology) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- KITopen (cc-by)
- Funders
- the Helmholtz Association (FE.5341.0118.0012)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Keywords
- lithium-ion batteries, battery thermal modeling, battery thermal management system, electrochemical-thermal coupling, equivalent circuit model, electrochemical model, heat generation, temperature effects on battery performance, battery safety, battery life, thermal analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.