The DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 46 of the 207 sources its claims cite were checked for support.
Functional carbon materials from waste plastics: synthesis and applications
Open accessAbstract
The global accumulation of waste plastics has led to severe environmental pollution, posing a serious threat to ecosystems. Conventional disposal methods, such as landfilling, mechanical recycling, and incineration, remain limited by low conversion efficiency, modest economic benefits, and the risk of secondary pollution. Converting plastics into high-value functional carbon materials offers a promising strategy for waste plastic recovery. This review systematically summarizes the physicochemical properties of major plastics, including polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, and polystyrene. It then discusses representative functional carbon materials—such as carbon nanotubes, graphene, porous carbon, carbon spheres, carbon nanosheets, carbon quantum dots, and soft carbon—derived from waste plastics using both conventional processes (direct pyrolysis, catalytic pyrolysis, one-pot synthesis, and templating methods), and emerging technologies (flash Joule heating and microwave-assisted pyrolysis). Furthermore, the applications of these functional carbon materials in environmental remediation (e.g., CO 2 adsorption, antibiotic removal, electromagnetic wave absorption, and heavy metal ion adsorption), and energy storage (e.g., lithium-ion batteries and supercapacitors) are reviewed. This work provides a timely overview of recent advances in the field and highlights pathways toward the sustainable utilization of waste plastics.
Overview
CoChat Summary
TL;DR
This review summarizes routes for converting waste plastics into functional carbon materials and their environmental/energy applications. It covers six major plastics, seven carbon product classes, conventional and emerging synthesis methods, and performance examples for CO₂ capture, pollutant removal, electromagnetic absorption, batteries, and supercapacitors.
Key findings
- Global annual plastic production reached 390 million tonnes by 2021, with China accounting for 32%; the five leading plastics by production share are PE (26.3%), PP (18.9%), PVC (12.7%), PET (6.2%), and PS (5.2%).
- Waste plastics can be converted into seven main functional carbon material classes: carbon nanotubes, graphene, porous carbon, carbon spheres, carbon nanosheets, carbon quantum dots, and soft carbon.
- Reported application performance includes PET-derived porous carbon with CO₂ uptake up to 4.42 mol/kg at 298 K and 101.3 kPa; PVC-derived porous carbon with tetracycline adsorption capacity of 1,480 mg/g; and CNT aerogels with reflection loss of 59.5 dB and an effective absorption bandwidth of 8.48 GHz at 2.7 mm.
- Energy-storage examples include PET-derived PBSC with 237 F/g at 1 A/g and only 2% capacity decay after 12,000 cycles, and PVC-derived soft carbon prepared at 800 °C delivering 302 mAh/g in potassium-ion batteries.
Methods
- This is a review article; the authors state that no datasets were generated or analyzed.
- It systematically summarizes the physicochemical properties of major plastics (PE, PP, PVC, PET, PS), representative functional carbon materials, conventional processes (direct pyrolysis, catalytic pyrolysis, one-pot synthesis, templating), and emerging technologies (microwave-assisted pyrolysis, flash Joule heating, laser-induced graphene, 3D printing).
- It compares preparation methods and material characteristics using tables, including reaction conditions, specific surface areas, carbon recovery, and applications.
Limitations
- The paper states that comprehensive techno-economic analysis and life cycle assessment are scarce, limiting quantitative assessment of economic and environmental trade-offs.
- The paper states that catalytic systems face limited feedstock adaptability and reliance on costly transition metals, especially Fe-, Co-, and Ni-based catalysts.
- The paper states a scalability gap: most research remains laboratory-scale, requiring continuous reactors and strategies such as energy integration and catalyst recycling. Evident from the text: as a review, it synthesizes cited studies rather than providing new experimental validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
45 Valid · 3 Not valid · 158 Not checked · 35 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“These factors collectively determine the morphology (e.g., porous carbon, carbon nanotubes), and key characteristics (specific surface area, pore structure, surface chemistry) of the carbon materials in the product [77,78] .”
§ Functional carbon materials from waste plastics: synthesis and applications > High-temperature pyrolysis
What the sources say
- Not checked — no full text of the sourcecites [77] Maqsood T, Dai J, Zhang Y, Guang M, Li B. 2021. Pyrolysis of plastic species: a review of resources and products. Journal of Analytical and Applied Pyrolysis 159:105295 source
- Partly supportedcites [78] Zhang K, Huang Z, Yang M, Liu M, Zhou Y, et al. 2023. Recent progress in melt pyrolysis: fabrication and applications of high-value carbon materials from abundant sources. SusMat 3(5):558−580 sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 2 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This method also allows for the direct treatment of mixed plastic waste.”
§ Functional carbon materials from waste plastics: synthesis and applications > Direct pyrolysis
What the sources say
- Partly supportedcites [65] Tang Y, Cen Z, Ma Q, Zheng B, Cai Z, et al. 2023. A versatile sulfur-assisted pyrolysis strategy for high-atom-economy upcycling of waste plastics into high-value carbon materials. Advanced Science 10(15):2206924 sourceExperimental — accuracy not yet measured
The Results and Discussion section, “Converting Real-World Waste Plastics into Sulfur-Doped Carbons” (page unavailable), reports treating waste milk bottles, food boxes, and vessels with sulfur. It does not say these different plastics were treated together as a mixed feed, so direct treatment of mixed plastic waste is not established by the reported tests. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The experimental results indicated that polyolefin plastics, including PP, HDPE, and LDPE, were responsible for the generation of over 40 wt% of gaseous products.”
§ Functional carbon materials from waste plastics: synthesis and applications > Catalytic pyrolysis
What the sources say
- Supportedcites [86] Cai N, Li X, Xia S, Sun L, Hu J, et al. 2021. Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: high-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms. Energy Conversion and Management 229:113794 source
The Conclusions state that PP and PE produced gaseous-product yields over 40 wt.% in the presence of an Fe/Al2O3 catalyst. The paper identifies HDPE and LDPE as the PE plastics studied. (LLM, conf=0.94)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Yu and colleagues used magnesium oxide as a template to convert PET into nanoporous carbon (NPC) [72] .”
§ Functional carbon materials from waste plastics: synthesis and applications > Template method
What the sources say
- Supportedcites [72] Yu W, Chen Z, Yu S, Ding J, Shan Y, et al. 2019. Highly dispersed Pt catalyst supported on nanoporous carbon derived from waste PET bottles for reductive alkylation. RSC Advances 9(53):31092−31101 source
The Introduction states that the authors prepared nanoporous carbons using MgO particles as nano-templates and powder from waste PET bottles as the carbon precursor. The Experimental section, “Preparation of the NPCs,” describes mixing PET powder with nano-MgO, pyrolyzing the mixture, and dissolving out the MgO. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Its performance significantly surpassed that of supports dominated by micropores, such as ZSM-5, Beta, and NKF-5.”
§ Functional carbon materials from waste plastics: synthesis and applications > Catalytic pyrolysis
What the sources say
- Partly supportedcites [91] Yao D, Yang H, Hu Q, Chen Y, Chen H, et al. 2021. Carbon nanotubes from post-consumer waste plastics: investigations into catalyst metal and support material characteristics. Applied Catalysis B: Environmental 280:119413 sourceExperimental — accuracy not yet measured
The Conclusions (p. unavailable) identify Ni-Fe/MCM41 as producing the highest carbon-deposition yield among the four supports, and Table 2 (p. unavailable) reports 55.6 wt.% versus 50.0, 47.0, and 36.6 wt.% for ZSM5, Beta, and NKF5. Our copy does not establish that all three alternatives are dominated by micropores or report a statistical test supporting 'significantly surpassed.' (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
91 more claims · 9 with their cited sources checked
Create a free account to see all 241 claims and every source verdict.
- It may state two separate claims as one. 131
- Probably not a substantial claim. 23
- The quote only partly states this claim. 5
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Functional carbon materials from waste plastics: synthesis and applications > Direct pyrolysis
“This achieved an 85% carbon recovery rate.”
§ Functional carbon materials from waste plastics: synthesis and applications > Catalytic pyrolysis
“PE 5 °C/min to 700 °C 3 h 157 Porous carbon 80 Sodium-ion batteries [65]”
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Carbon Nanotubes: Present and Future Commercial Applications
De Volder, M. F. L., Tawfick, S. H., Baughman, R. H., & Hart, A. J. (2013) · Science · doi:10.1126/science.1222453 · Cited by 5,587
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Plastics in soil: Analytical methods and possible sources
Bläsing, M., & Amelung, W. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.08.086 · Cited by 1,655
Chemical recycling to monomer for an ideal, circular polymer economy
Coates, G. W., & Getzler, Y. D. Y. L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0190-4 · Cited by 1,644
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Gram-scale bottom-up flash graphene synthesis
Luong, D. X., Bets, K. V., Algozeeb, W. A., Stanford, M. G., Kittrell, C., Chen, W., Salvatierra, R. V., Ren, M., McHugh, E. A., Advincula, P. A., et al. (2020) · Nature · doi:10.1038/s41586-020-1938-0 · Cited by 950
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Microwave-initiated catalytic deconstruction of plastic waste into hydrogen and high-value carbons
Jie, X., Li, W., Slocombe, D., Gao, Y., Banerjee, I., Gonzalez-Cortes, S., Yao, B., AlMegren, H., Alshihri, S., Dilworth, J., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00518-5 · Cited by 611
Cited by
Yuan, J., Zhou, H., Zhou, X., Huang, J., Yang, G., Cheng, S., & Chen, Y. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.6c01027
Self-citationFundamentals, advances, and perspectives of piezocatalysis for biomass conversion
Syed, N. R., Zhang, B., Ren, C., Gizaw, D. G., & Ruan, R. (2026) · Sustainable Carbon Materials · doi:10.48130/scm-0026-0022
Differential Coats–Redfern analysis for thermolysis of carbon-relevant polymers
Jeong, Y. H., Son, Y. S., Upare, D. P., Lee, C. J., & Kang, Y. S. (2026) · Carbon letters · doi:10.1007/s42823-026-01120-8
Banin, G. U., Shahzad, S., & Shah, A. (2026) · RSC Advances · doi:10.1039/d6ra00667a · Cited by 1
Metadata
- Authors
- Yuan, J., Yang, G., Zhou, X., Huang, J., & Chen, Y.
- Affiliations
- South China University of Technology (CN)
- Chinese Academy of Sciences (CN)
- ORCID
- Huang, Jianlin
- Venue
- Sustainable Carbon Materials
- Publisher
- Maximum Academic Press
- Published
- 2025
- Volume
- 1
- Issue
- 1
- Pages
- 0-0
- ISSN
- 3070-3557 (ISSN-L)
- OpenAlex
- W7118127642
- Semantic Scholar
- 7f3fc2ae150df24dc476755600abf8856a5375e6
- Cited by
- 8
- References
- 130
- Citations by year
- 2026: 8
- FWCI
- 1.96
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- cc-by
- Locations
- Sustainable Carbon Materials (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Natural Science Foundation of China (52176214)
- Fundamental Research Funds for the Central Universities (2024ZYGXZR012)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- plastic waste, functional carbon materials, pyrolysis, catalytic pyrolysis, flash Joule heating, microwave pyrolysis, carbon nanotubes, graphene, porous carbon, carbon quantum dots, soft carbon, polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, polystyrene, environmental remediation, CO2 adsorption, antibiotic removal, electromagnetic wave absorption, heavy metal adsorption, lithium-ion batteries, supercapacitors, plastic recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Functional carbon materials from waste plastics: synthesis and applications. https://app.cochat.ai/papers/10.48130/scm-0025-0005
- The paper
- Yuan, J., Yang, G., Zhou, X., Huang, J., & Chen, Y. (2025). Functional carbon materials from waste plastics: synthesis and applications. Sustainable Carbon Materials. https://doi.org/10.48130/scm-0025-0005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.