Using a holographic imager on a tethered balloon system for microphysical observations of boundary layer clouds
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Conventional techniques to measure boundary layer clouds such as research aircraft are unable to sample in orographically diverse or densely populated areas. In this paper, we present a newly developed measurement platform on a tethered balloon system (HoloBalloon) to measure in situ vertical profiles of microphysical and meteorological cloud properties up to 1 km above ground. The main component of the HoloBalloon platform is a holographic imager, which uses digital in-line holography to image an ensemble of cloud particles in the size range from small cloud droplets to precipitation-sized particles in a three-dimensional volume. Based on a set of two-dimensional images, information about the phase-resolved particle size distribution, shape and spatial distribution can be obtained. The velocity-independent sample volume makes holographic imagers particularly well suited for measurements on a balloon. The unique combination of holography and balloon-borne measurements allows for observations with high spatial resolution, covering cloud structures from the kilometer down to the millimeter scale. The potential of the measurement technique in studying boundary layer clouds is demonstrated on the basis of a case study. We present observations of a supercooled low stratus cloud during a Bise situation over the Swiss Plateau in February 2018. In situ microphysical profiles up to 700 m altitude above the ground were performed at temperatures down to −8 ∘C and wind speeds up to 15 m s−1. We were able to capture unique microphysical signatures in stratus clouds, in the form of inhomogeneities in the cloud droplet number concentration and in cloud droplet size, from the kilometer down to the meter scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
AGAP: an atmospheric gondola for aerosol profiling
Mazzola, M., Busetto, M., Ferrero, L., Viola, A. P., & Cappelletti, D. (2016) · Rendiconti Lincei · doi:10.1007/s12210-016-0514-x · Cited by 30 · cited 1×
“However, conventional, blimp-like TBSs are limited to wind speeds below 10 m s−1 due to the instability of the balloon at higher wind speeds (e.g., Lawson et al., 2011; Canut et al., 2016; Mazzola et al., 2016).”
Background
Cited by
Henneberger, J., Ramelli, F., Spirig, R., Omanovic, N., Miller, A. J., Fuchs, C., Zhang, H., Bühl, J., Hervo, M., Kanji, Z. A., et al. (2023) · Bulletin of the American Meteorological Society · doi:10.1175/bams-d-22-0178.1 · Cited by 47
Self-citationMiller, A. J., Ramelli, F., Fuchs, C., Omanovic, N., Spirig, R., Zhang, H., Lohmann, U., Kanji, Z. A., & Henneberger, J. (2024) · Atmospheric Measurement Techniques · doi:10.5194/amt-17-601-2024 · Cited by 26
Self-citationRepurposing weather modification for cloud research showcased by ice crystal growth
Ramelli, F., Henneberger, J., Fuchs, C., Miller, A. J., Omanovic, N., Spirig, R., Zhang, H., David, R. O., Ohneiser, K., Seifert, P., et al. (2024) · PNAS Nexus · doi:10.1093/pnasnexus/pgae402 · Cited by 12
Self-citationQuantifying ice crystal growth rates in natural clouds from glaciogenic cloud seeding experiments
Fuchs, C., Ramelli, F., Miller, A. J., Omanovic, N., Spirig, R., Zhang, H., Seifert, P., Ohneiser, K., Lohmann, U., & Henneberger, J. (2025) · Atmospheric Chemistry and Physics · doi:10.5194/acp-25-12177-2025 · Cited by 4
“A TBS (see Ramelli et al., 2020) is used to lift our in situ instrumentation inside the cloud .”
Self-citationHernandez‐Galindo, I., Määttänen, A., Redmond Roche, B. H., Boucher, O., Irvine, P. J., & Moore, J. C. (2026) · Earth's Future · doi:10.1029/2025ef007254 · Cited by 2
Metadata
- Authors
- Ramelli, F., Beck, A., Henneberger, J., & Lohmann, U.
- Venue
- Atmospheric Measurement Techniques
- Publisher
- Copernicus GmbH
- Published
- 2020-02-27
- Volume
- 13
- Issue
- 2
- Pages
- 925-939
- ISSN
- 1867-1381 (ISSN-L)
- 1867-8548
- OpenAlex
- W2963651119
- Cited by
- 64
- References
- 1
- FWCI
- 3.36
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Using a holographic imager on a tethered balloon system for microphysical observations of boundary layer clouds. https://app.cochat.ai/papers/10.5194/amt-13-925-2020
- The paper
- Ramelli, F., Beck, A., Henneberger, J., & Lohmann, U. (2020). Using a holographic imager on a tethered balloon system for microphysical observations of boundary layer clouds. Atmospheric Measurement Techniques. https://doi.org/10.5194/amt-13-925-2020
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.