The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth
Abstract
The ability to produce complex micro‐ or nanostructures from naturally derived hydrogels is significant for biomedical applications. However, precisely controlled architectures of soft hydrogels are difficult to be achieved due to their limited mechanical properties. Despite intensive research, significant challenges persist to fabricate hydrogels with ordered structures and adequate mechanical and biological properties for mimicking native tissues. In this work, a 3D printing technique is proposed to fabricate chitosan hydrogel with highly flexible and organized microfiber networks. The microstructured hydrogel scaffolds are obtained through a neutralization step. The strain at failure of hydrogel filaments can reach up to ≈400% and maximum strength is ≈7.5 MPa. The hydrogel scaffolds feature surface textures that can guide and align cell growth. This approach of tailoring hydrogels opens doors to design and produce 3D tissue constructs with topographical, biological, and mechanical compatibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The experimental results indicate a 17% increase in tensile strength compared to the microfiber chitosan hydrogel network prepared by Wu et al. [28] using 3D printing technology.”
From Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels (2024) · cites this paper as Wu et al. [28]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Extracellular Matrix Assembly: A Multiscale Deconstruction
Mouw, J. K., Ou, G., & Weaver, V. M. (2014) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3902 · Cited by 1,534
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Research works printed but not linked: 39
- 10.1126/science.1131000 · DOI · Paper page
- 10.1017/CBO9780511601101 · DOI · Paper page
- 10.1016/S0142-9612(03)00339-9 · DOI · Paper page
- 10.1002/smll.201601679 · DOI
- 10.1016/j.biomaterials.2014.01.064 · DOI · Paper page
- 10.1002/smll.201601355 · DOI
- 10.1039/C5RA15376J · DOI
- 10.1038/nmat3339 · DOI · Paper page
- 10.1038/ncomms7933 · DOI · Paper page
- 10.1039/c3an36599a · DOI · Paper page
- 10.1146/annurev-bioeng-070909-105351 · DOI · Paper page
- 10.1002/adma.201201232 · DOI · Paper page
- 10.1038/nmat2778 · DOI · Paper page
- 10.1002/adma.200803092 · DOI · Paper page
- 10.1016/j.eurpolymj.2012.12.009 · DOI · Paper page
- 10.1016/j.eurpolymj.2010.12.011 · DOI · Paper page
- 10.1038/nmat1421 · DOI · Paper page
- 10.1016/j.carbpol.2011.04.001 · doi:10.1016/j.carbpol.2011.04.001
- 10.1038/nature11409 · DOI · Paper page
- 10.1126/sciadv.1500758 · DOI · Paper page
- 10.1108/13552540510589458 · DOI
- 10.1002/adma.201405076 · DOI · Paper page
- 10.1016/S0032-3861(99)00056-7 · DOI · Paper page
- Dumitriu S., 2001, Polysaccharides as Biomaterials, 173
- 10.1016/S0142-9612(00)00187-3 · DOI · Paper page
- 10.1002/smll.201300975 · DOI · Paper page
- 10.1111/j.1551-2916.2006.01382.x · DOI · Paper page
- 10.1023/A:1010987209703 · doi:10.1023/a:1010987209703
- 10.1038/nature06619 · DOI · Paper page
- 10.1016/S0939-6411(03)00160-7 · DOI · Paper page
- 10.1021/la050530e · DOI
- E. S.Matsuo T.Tanaka 1992 358 482. · DOI · Paper page
- 10.1039/c2sm00011c · DOI · Paper page
- 10.1039/c2jm31643a · DOI
- 10.1021/acs.biomac.5b01037 · doi:10.1021/acs.biomac.5b01037
- 10.1016/j.indcrop.2013.11.001 · DOI
- 10.1016/j.biomaterials.2005.05.036 · DOI
- 10.1039/c2jm30555k · DOI
- 10.1039/C4TB01636J · DOI · Paper page
Cited by
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Chitosan hydrogels in 3D printing for biomedical applications
Rajabi, M., McConnell, M., Cabral, J., & Ali, M. A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117768 · Cited by 351
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2020.12.001 · Cited by 308
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
Bioinks and bioprinting: A focused review
Mobaraki, M., Ghaffari, M., Yazdanpanah, A., Luo, Y., & Mills, D. K. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00080 · Cited by 258
Natural polymer-based scaffolds for soft tissue repair
Chen, M., Jiang, R., Deng, N., Zhao, X., Li, X., & Guo, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.954699 · Cited by 57
Zeng, X., Zhu, Z., Chang, W., Wu, B., & Huang, W. (2024) · Applied Sciences · doi:10.3390/app14209193 · Cited by 11
Metadata
- Authors
- Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M.
- Venue
- Advanced Biosystems
- Publisher
- Wiley
- Published
- 2017-05-15
- Volume
- 1
- Issue
- 6
- ISSN
- 2366-7478
- Cited by
- 92
- References
- 3
- Language
- en
- Funders
- Natural Sciences and Engineering Research Council of Canada
- Canada Foundation for Innovation
- Concordia University
- China Scholarship Council
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.