The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
Abstract
The purpose of this paper is to provide a succinct but nevertheless complete mechanistic overview of the various types of magnesium corrosion. The understanding of the corrosion processes of magnesium alloys builds upon our understanding of the corrosion of pure magnesium. This provides an understanding of the types of corrosion exhibited by magnesium alloys, and also of the environmental factors of most importance. This deep understanding is required as a foundation if we are to produce magnesium alloys much more resistant to corrosion than the present alloys. Much has already been achieved, but there is vast scope for improvement. This present analysis can provide a foundation and a theoretical framework for further, much needed research. There is still vast scope both for better fundamental understanding of corrosion processes, engineering usage of magnesium, and also on the corrosion protection of magnesium alloys in service.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Inoue, A. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00300-6 · Cited by 5,887
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Self-citationThe anodic dissolution of magnesium in chloride and sulphate solutions
Song, G., Atrens, A., John, D. S., Wu, X., & Nairn, J. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00090-5 · Cited by 890
Self-citationMakar, G. L., & Kruger, J. (1993) · International Materials Reviews · doi:10.1179/095066093790326320 · Cited by 803
Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy
Ambat, R., Aung, N. N., & Zhou, W. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00143-2 · Cited by 641
The electrochemical corrosion of pure magnesium in 1 N NaCl
Song, G., Atrens, A., Stjohn, D., Nairn, J., & Li, Y. (1997) · Corrosion Science · doi:10.1016/s0010-938x(96)00172-2 · Cited by 614
Self-citationNew Amorphous Mg-Ce-Ni Alloys with High Strength and Good Ductility
Inoue, A., Ohtera, K., Kita, K., & Masumoto, T. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.l2248 · Cited by 544
The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions
Baril, G., & Pébère, N. (2001) · Corrosion Science · doi:10.1016/s0010-938x(00)00095-0 · Cited by 474
Electron Metallography of Chemical Attack Upon Some Alloys Susceptible to Stress Corrosion Cracking
Pickering, H. W., & Swann, P. R. (1963) · Corrosion · doi:10.5006/0010-9312-19.11.373 · Cited by 185
The corrosion of magnesium in aqueous solution containing chloride ions
Tunold, R., Holtan, H., Berge, M.-B. H., Lasson, A., & Steen-Hansen, R. (1977) · Corrosion Science · doi:10.1016/0010-938x(77)90059-2 · Cited by 184
Cited by
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation
Shi, Z., Liu, M., & Atrens, A. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.10.016 · Cited by 1,029
Self-citationAgarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
Kirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
Review of Recent Developments in the Field of Magnesium Corrosion
Atrens, A., Song, G., Liu, M., Shi, Z., Cao, F., & Dargusch, M. S. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400434 · Cited by 806
Self-citationIn vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review
Xin, Y., Hu, T., & Chu, P. K. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.004 · Cited by 729
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Calcium phosphate coatings on magnesium alloys for biomedical applications: A review
Shadanbaz, S., & Dias, G. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.016 · Cited by 651
Kraus, T., Fischerauer, S. F., Hänzi, A. C., Uggowitzer, P. J., Löffler, J. F., & Weinberg, A. M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.008 · Cited by 629
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Advances in Mg corrosion and research suggestions
Atrens, A., Song, G.-L., Cao, F., Shi, Z., & Bowen, P. K. (2013) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2013.09.003 · Cited by 495
Self-citationBiodegradable Materials and Metallic Implants—A Review
Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040044 · Cited by 493
Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys
Cai, S., Lei, T., Li, N., & Feng, F. (2012) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.07.042 · Cited by 490
A Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
Self-citationDissolvable Metals for Transient Electronics
Yin, L., Cheng, H., Mao, S., Haasch, R., Liu, Y., Xie, X., Hwang, S., Jain, H., Kang, S., Su, Y., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301847 · Cited by 487
Magnesium–air batteries: from principle to application
Zhang, T., Tao, Z., & Chen, J. (2014) · Mater. Horiz. · doi:10.1039/c3mh00059a · Cited by 478
Gu, X. N., Xie, X. H., Li, N., Zheng, Y. F., & Qin, L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.02.018 · Cited by 478
Recent progress in corrosion protection of magnesium alloys by organic coatings
Hu, R.-G., Zhang, S., Bu, J.-F., Lin, C.-J., & Song, G.-L. (2012) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2011.10.011 · Cited by 472
Self-citationAn innovative specimen configuration for the study of Mg corrosion
Shi, Z., & Atrens, A. (2011) · Corrosion Science · doi:10.1016/j.corsci.2010.09.016 · Cited by 469
Self-citationInfluence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41
Zhao, M.-C., Liu, M., Song, G.-L., & Atrens, A. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.08.023 · Cited by 461
Self-citationA Critical Review of the Stress Corrosion Cracking (SCC) of Magnesium Alloys
Winzer, N., Atrens, A., Song, G., Ghali, E., Dietzel, W., Kainer, K. U., Hort, N., & Blawert, C. (2005) · Advanced Engineering Materials · doi:10.1002/adem.200500071 · Cited by 451
Self-citationReview of studies on corrosion of magnesium alloys
ZENG, R.-C., ZHANG, J., HUANG, W.-J., DIETZEL, W., KAINER, K. U., BLAWERT, C., & KE, W. (2006) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(06)60297-5 · Cited by 449
Li, X., Liu, X., Wu, S., Yeung, K. W. K., Zheng, Y., & Chu, P. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.005 · Cited by 428
Cui, L.-Y., Gao, S.-D., Li, P.-P., Zeng, R.-C., Zhang, F., Li, S.-Q., & Han, E.-H. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.01.025 · Cited by 425
Biodegradable Mg and Mg alloys: Corrosion and biocompatibility
Virtanen, S. (2011) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2011.05.028 · Cited by 423
Advances in coatings on biodegradable magnesium alloys
Yin, Z.-Z., Qi, W.-C., Zeng, R.-C., Chen, X.-B., Gu, C.-D., Guan, S.-K., & Zheng, Y.-F. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2019.09.008 · Cited by 419
An Impedance Investigation of the Mechanism of Pure Magnesium Corrosion in Sodium Sulfate Solutions
Baril, G., Galicia, G., Deslouis, C., Pébère, N., Tribollet, B., & Vivier, V. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2401056 · Cited by 418
Corrosion of, and cellular responses to Mg–Zn–Ca bulk metallic glasses
Gu, X., Zheng, Y., Zhong, S., Xi, T., Wang, J., & Wang, W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.015 · Cited by 413
Transient, Biocompatible Electronics and Energy Harvesters Based on ZnO
Dagdeviren, C., Hwang, S., Su, Y., Kim, S., Cheng, H., Gur, O., Haney, R., Omenetto, F. G., Huang, Y., & Rogers, J. A. (2013) · Small · doi:10.1002/smll.201300146 · Cited by 412
Xin, Y., Huo, K., Tao, H., Tang, G., & Chu, P. K. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.014 · Cited by 408
Seawater-driven magnesium based Janus micromotors for environmental remediation
Gao, W., Feng, X., Pei, A., Gu, Y., Li, J., & Wang, J. (2013) · Nanoscale · doi:10.1039/c3nr01458d · Cited by 387
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
Cao, F., Shi, Z., Hofstetter, J., Uggowitzer, P. J., Song, G., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.05.018 · Cited by 371
Self-citationMagnesium biomaterials for orthopedic application: A review from a biological perspective
Walker, J., Shadanbaz, S., Woodfield, T. B. F., Staiger, M. P., & Dias, G. J. (2014) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33113 · Cited by 352
Wen, C., Guan, S., Peng, L., Ren, C., Wang, X., & Hu, Z. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.078 · Cited by 312
Fast escape of hydrogen from gas cavities around corroding magnesium implants
Kuhlmann, J., Bartsch, I., Willbold, E., Schuchardt, S., Holz, O., Hort, N., Höche, D., Heineman, W. R., & Witte, F. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.008 · Cited by 310
Liang, J., Srinivasan, P. B., Blawert, C., Störmer, M., & Dietzel, W. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.02.004 · Cited by 306
On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy
Gomes, M. P., Costa, I., Pébère, N., Rossi, J. L., Tribollet, B., & Vivier, V. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.03.080 · Cited by 306
Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins
Yan, C., Xin, Y., Chen, X.-B., Xu, D., Chu, P. K., Liu, C., Guan, B., Huang, X., & Liu, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-24939-3 · Cited by 306
Comprehensive screening of Mg corrosion inhibitors
Lamaka, S. V., Vaghefinazari, B., Mei, D., Petrauskas, R. P., Höche, D., & Zheludkevich, M. L. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.07.011 · Cited by 299
Becoming Sustainable, The New Frontier in Soft Robotics
Hartmann, F., Baumgartner, M., & Kaltenbrunner, M. (2021) · Advanced Materials · doi:10.1002/adma.202004413 · Cited by 281
Magnesium Implants: Prospects and Challenges
Chakraborty Banerjee, P., Al-Saadi, S., Choudhary, L., Harandi, S. E., & Singh, R. (2019) · Materials · doi:10.3390/ma12010136 · Cited by 280
Liu, J., Bian, D., Zheng, Y., Chu, X., Lin, Y., Wang, M., Lin, Z., Li, M., Zhang, Y., & Guan, S. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.11.013 · Cited by 268
Cao, F., Shi, Z., Song, G.-L., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.030 · Cited by 267
Self-citationLiang, J., Srinivasan, P. B., Blawert, C., & Dietzel, W. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.06.034 · Cited by 267
Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys
Zander, D., & Zumdick, N. A. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.027 · Cited by 260
Corrosion mechanism and evaluation of anodized magnesium alloys
Song, G.-L., & Shi, Z. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.04.008 · Cited by 259
Self-citationSuperhydrophobic coatings for corrosion protection of magnesium alloys
Yao, W., Liang, W., Huang, G., Jiang, B., Atrens, A., & Pan, F. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.055 · Cited by 257
Self-citationEffect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid
Zhou, W., Shen, T., & Aung, N. N. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.11.030 · Cited by 257
Revolutionizing biodegradable metals
Yun, Y., Dong, Z., Lee, N., Liu, Y., Xue, D., Guo, X., Kuhlmann, J., Doepke, A., Halsall, H. B., Heineman, W., et al. (2009) · Materials Today · doi:10.1016/s1369-7021(09)70273-1 · Cited by 252
Lin, Z., Sun, X., & Yang, H. (2021) · Materials & Design · doi:10.1016/j.matdes.2020.109350 · Cited by 156
Lin, B., Zhong, M., Zheng, C., Cao, L., Wang, D., Wang, L., Liang, J., & Cao, B. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.09.033 · Cited by 106
Metadata
- Authors
- Song, G., & Atrens, A.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2003-12-30
- Volume
- 5
- Issue
- 12
- Pages
- 837-858
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2029933377
- Cited by
- 2,056
- References
- 10
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.