Cellulose Fibrils for Polymer Reinforcement
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Agglomerated cellulose fibrils embedded in a lignin matrix in the cell wall are a predominant reason for the outstanding specific tensile strength of wood. To convert these mechanical properties to practical use for polymer composites, the fibrils were isolated out of sulphite pulp. Depending on the disintegration method, the fibrils have diameters in the nanometer and lengths in the micrometer range.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The sulfuric acid treatment, combined with mechanical dispersion, resulted in finer fibril structures than MFC obtained only by a mechanical treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“Their Young's modulus was determined by different authors to be between 130 GPa [76] and 250 GPa [77].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“The former produced diameters below 50 nm, but their lengths were still in the micrometer range.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“and up to a factor of 3 (fibril content 20 wt%) for HPC nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“They reported that for nanocomposites reinforced with mechanically isolated fibrils, the Young's modulus increased up to a factor of 2.5 (fibril content 10 wt%) for the PVA-nanocomposites”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Gopalan Nair, K., & Dufresne, A. (2003) · Biomacromolecules · doi:10.1021/bm020127b · Cited by 537
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Tashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 7
- A. J. Michell inComposites Asia Pacific 89 Composites Institute of Australia Adelaide Australia 1989 pp. 66.
- S. A. Wainwright W. D. Biggs J. D. Currey J. M. Gosline Princeton University Press Princeton 1982.
- Herrick F.W., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 797
- Turbak A.F., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 815
- L. A. Berglund (Ed.: M. A. D. Mohanty) CRC Press LLC 2004.
- Q. Wu X. Liu L. A. Berglund inProc. 23rd Riso International Symposium on Material Science: Sustainable Natural and Polymeric Composites ‐ Science and Technology(Ed.: H. Lilholt Madsen B. Toftegaard H. L. Cendre E. Megnis M. Mikkelsen L. P. Sorensen B. F.) Riso National Labaratory Roskilde Denmark 2002 pp. 107.
- O. A. Battista Microcrystal Polymer Science Chapter 2 Mc Graw Hill New York 1975.
Cited by
Items 101–200 of 685
Nanocellulose-tannin films: From trees to sustainable active packaging
Missio, A. L., Mattos, B. D., Ferreira, D. D. F., Magalhães, W. L. E., Bertuol, D. A., Gatto, D. A., Petutschnigg, A. J., & Tondi, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.205 · Cited by 165
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Soft Matter · doi:10.1039/c1sm05325f · Cited by 162
Spray-dried nanofibrillar cellulose microparticles for sustained drug release
Kolakovic, R., Laaksonen, T., Peltonen, L., Laukkanen, A., & Hirvonen, J. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.03.031 · Cited by 162
“(Henriksson et al., 2007; Zimmermann et al., 2004), or grinder (Iwamoto et al., 2005).”
Natural Fibres: Structure, Properties and Applications
Thomas, S., Paul, S. A., Pothan, L. A., & Deepa, B. (2011) · Cellulose Fibers: Bio- and Nano-Polymer Composites · doi:10.1007/978-3-642-17370-7_1 · Cited by 161
Nechyporchuk, O., Pignon, F., & Belgacem, M. N. (2015) · Journal of Materials Science · doi:10.1007/s10853-014-8609-1 · Cited by 159
“In this context, two types of equipment are employed: homogenizers [4, 5, 10–12] and microfluidizers [11, 13–15].”
MethodInfluence of homogenization and drying on the thermal stability of microfibrillated cellulose
Quiévy, N., Jacquet, N., Sclavons, M., Deroanne, C., Paquot, M., & Devaux, J. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.020 · Cited by 159
Advances in the development of biodegradable coronary stents: A translational perspective
Zong, J., He, Q., Liu, Y., Qiu, M., Wu, J., & Hu, B. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100368 · Cited by 158
Recent advances in bionanocomposites: Preparation, properties, and applications
Mousa, M., Dong, Y., & Davies, I. J. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2015.1103240 · Cited by 156
Spray-Dried Cellulose Nanofibers as Novel Tablet Excipient
Kolakovic, R., Peltonen, L., Laaksonen, T., Putkisto, K., Laukkanen, A., & Hirvonen, J. J. (2011) · AAPS PharmSciTech · doi:10.1208/s12249-011-9705-z · Cited by 156
Josset, S., Orsolini, P., Siqueira, G. D. F., Tejado, Á., Tingaut, P., & Zimmermann, T. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p167-175 · Cited by 155
Self-citationWood Modification Technologies: Principles, Sustainability, and the Need for Innovation
Sandberg, D., Kutnar, A., Karlsson, O., & Jones, D. R. (2021) · CRC Press eBooks · doi:10.1201/9781351028226 · Cited by 155
Nanocellulose: From an agricultural waste to a valuable pharmaceutical ingredient
Kamel, R., El‐Wakil, N. A., Dufresne, A., & ElKasabgy, N. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.242 · Cited by 152
Spray-Coated Multilayer Cellulose Nanocrystal—Chitin Nanofiber Films for Barrier Applications
Satam, C. C., Irvin, C. W., Lang, A. W., Jallorina, J. C. R., Shofner, M. L., Reynolds, J. R., & Meredith, J. C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01536 · Cited by 148
Poly(ε-caprolactone) (PCL)/cellulose nano-crystal (CNC) nanocomposites and foams
Mi, H., Jing, X., Peng, J., Salick, M. R., Peng, X., & Turng, L. (2014) · Cellulose · doi:10.1007/s10570-014-0327-y · Cited by 143
Zhang, W., Yang, X., Li, C., Liang, M., Lu, C., & Deng, Y. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.062 · Cited by 143
Serrà, A., González, I., Oliver-Ortega, H., Tarrés, Q., Delgado‐Aguilar, M., & Mutjé, P. (2017) · Polymers · doi:10.3390/polym9110557 · Cited by 142
Pullulan–nanofibrillated cellulose composite films with improved thermal and mechanical properties
Trovatti, E., Fernandes, S. C. M., Rubatat, L., Perez, D. D. S., Freire, C. S. R., Silvestre, A. J. D., & Neto, C. P. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.06.003 · Cited by 140
Cheng, Q., Wang, S., & Han, Q. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30160 · Cited by 139
Lu, Y., Sun, Q., Yang, D., She, X., Yao, X., Zhu, G., Li, P., Zhao, H., & Li, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31310c · Cited by 137
Environmentally benign extraction of cellulose from dunchi fiber for nanocellulose fabrication
Khan, M. N., Rehman, N., Sharif, A., Ahmed, E., Farooqi, Z. H., & Din, M. I. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.333 · Cited by 134
Veigel, S., Müller, U., Kečkéš, J., Obersriebnig, M., & Gindl‐Altmutter, W. (2011) · Cellulose · doi:10.1007/s10570-011-9576-1 · Cited by 133
“The crystalline part of the cellulose has an estimated strength of up to 10 GPa (Zimmermann et al. 2004) and an elastic modulus in the range of 138 GPa (Sakurada et al.”
Wang, R., Chen, L., Zhu, J. Y., & Yang, R. (2017) · ChemNanoMat · doi:10.1002/cnma.201700015 · Cited by 132
Abdulkhani, A., Marvast, E. H., Ashori, A., Hamzeh, Y., & Karimi, A. N. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.08.050 · Cited by 130
Yadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Eyholzer, C., de Couraça, A. B., Duc, F., Bourban, P. ‐., Tingaut, P., Zimmermann, T., Månson, J. ‐. E., & Oksman, K. (2011) · Biomacromolecules · doi:10.1021/bm101131b · Cited by 129
Self-citationZheng, X., Li, X., Li, J., Wang, L., Jin, W., Liu, J., Pei, Y., & Tang, K. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.169 · Cited by 125
“microfibrillated cellulose (MFC) with large aspect ratio and web-like structure has recently attracted increasing interest due to its super properties, such as high mechanical properties, high expanded surface area, very high aspect ratio, and light weight [34-37].”
BackgroundHo, T. T. T., Zimmermann, T., Ohr, S., & Caseri, W. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3011737 · Cited by 125
Self-citationMechanical and Morphological Properties of Cellulose Fibril Reinforced Nanocomposites
Zimmermann, T., Pöhler, E., & Schwaller, P. (2005) · Advanced Engineering Materials · doi:10.1002/adem.200500157 · Cited by 124
Self-citationMechanical and thermal properties of nanofibrillated cellulose reinforced silica aerogel composites
Wong, J., Kaymak, H., Tingaut, P., Brunner, S., & Koebel, M. M. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.06.025 · Cited by 121
Cellulose and Nanocellulose from Maize Straw: An Insight on the Crystal Properties
Rehman, N., de Miranda, M. I. G., Rosa, S. M. L., Pimentel, D. M., Nachtigall, S. M. B., & Bica, C. I. D. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0624-9 · Cited by 121
Asad, M., Saba, N., Asiri, A. M., Jawaid, M., Indarti, E., & Wanrosli, W. D. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.015 · Cited by 120
Rheology of nanofibrillated cellulose/acrylate systems for coating applications
Grüneberger, F., Künniger, T., Zimmermann, T., & Arnold, M. (2014) · Cellulose · doi:10.1007/s10570-014-0248-9 · Cited by 119
“High-shear homogenizers and grinders are the most favoured methods (Zimmermann et al. 2004; Iwamoto et al. 2005).”
MethodSelf-citationFortunati, E., Yang, W., Luzi, F., Kenny, J. M., Torre, L., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.013 · Cited by 117
Cellulose nanocrystal-filled poly(acrylic acid) nanocomposite fibrous membranes
Lü, P., & Hsieh, Y. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/41/415604 · Cited by 116
Iridescent Cellulose Nanocrystal Films Modified with Hydroxypropyl Cellulose
Walters, C. M., Boott, C. E., Nguyen, T., Hamad, W. Y., & MacLachlan, M. J. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00056 · Cited by 114
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
“For example, Zimmermann, Pöhler, and Geiger [250], in their work on nanocomposites of PVA and cellulose microfibrils isolated from sulfite pulp, observed that the addition of 5 wt% of cellulose did not increase the tensile strength or stiffness of the PVA composites.”
BackgroundMaterial Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Lamm, M. E., Wang, L., Kishore, V., Tekinalp, H., Kunc, V., Wang, J., Gardner, D. J., & Ozcan, S. (2020) · Polymers · doi:10.3390/polym12092115 · Cited by 110
Nanofibrillated cellulose composites and wood derived scaffolds for functional materials
Keplinger, T., Wang, X., & Burgert, I. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10711d · Cited by 108
Investigation of curcumin release from chitosan/cellulose micro crystals (CMC) antimicrobial films
Bajpai, S. K., Chand, N., & Sonam, A. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.05.012 · Cited by 108
Cerrutti, P., Roldán, P., Martínez-García, R., Galvagno, M. A., Vázquez, A., & Foresti, M. L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43109 · Cited by 107
Shuvo, I. I. (2020) · Bioresources and Bioprocessing · doi:10.1186/s40643-020-00339-1 · Cited by 107
Preparation of cross-linked cellulose nanofibril aerogel with water absorbency and shape recovery
Kim, C. H., Youn, H. J., & Lee, H. L. (2015) · Cellulose · doi:10.1007/s10570-015-0745-5 · Cited by 107
“The elastic modulus of the crystal region of cellulose ranges from 130 to 250 GPa (Zimmermann et al. 2004; Sakurada et al. 1962), while that of the amorphous region is reported to be 12.2 (Wang et al. 2014) or 10.4 GPa (Chen et al. 2004).”
BackgroundInfluentialModified nanofibrillated cellulose–polyvinyl alcohol films with improved mechanical performance
Virtanen, S., Vartianen, J., Setälä, H., Tammelin, T., & Vuoti, S. (2014) · RSC Advances · doi:10.1039/c3ra46287k · Cited by 107
Novel materials based on chitosan and cellulose
Fernandes, S. C. M., Freire, C. S. R., Silvestre, A. J. D., Neto, C. P., & Gandini, A. (2011) · Polymer International · doi:10.1002/pi.3024 · Cited by 106
Sehaqui, H., Morimune, S., Nishino, T., & Berglund, L. A. (2012) · Biomacromolecules · doi:10.1021/bm301105s · Cited by 105
Correia, V. D. C., dos Santos, S. F., Teixeira, R. S., & Savastano, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.066 · Cited by 105
“The higher specific density of the nanofibrillated cellulose compared to pulp is due to the high density of hydroxyl groups on the surface of the nanofibrillated cellulose, which can strongly interact and lead to agglomeration and formation of highly entangled network [45,46], and therefore, increase the specific dens…”
BackgroundZhong, L. X., Fu, S. Y., Zhou, X. S., & Zhan, H. Y. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.11.010 · Cited by 100
Panthapulakkal, S., & Sain, M. M. (2012) · International Journal of Polymer Science · doi:10.1155/2012/381342 · Cited by 100
Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus
Borges, A. C., Eyholzer, C., Duc, F., Bourban, P. ‐., Tingaut, P., Zimmermann, T., Pioletti, D. P., & Månson, J. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.05.029 · Cited by 99
Self-citationMechanochemical Transformations of Biomass into Functional Materials
Hajiali, F., Jin, T., Yang, G., Santos, M., Lam, E., & Moores, A. (2022) · ChemSusChem · doi:10.1002/cssc.202102535 · Cited by 99
Wang, Y., Liu, H., Ji, X., Wang, Q., Tian, Z., & Fatehi, P. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125227 · Cited by 98
Nanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Production and Characteristics of Cellulose from Different Sources
Heinze, T. J., Seoud, O. A. E., & Koschella, A. (2018) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-73168-1_1 · Cited by 96
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Cellulose derivatives as environmentally-friendly additives in water-based drilling fluids: A review
Khan, M. A., Li, M., Lv, K., Sun, J., Liu, C., Liu, X., Shen, H., Dai, L., & Lalji, S. M. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122355 · Cited by 94
Idumah, C. I., & Hassan, A. (2016) · Reviews in Chemical Engineering · doi:10.1515/revce-2015-0046 · Cited by 92
“Usually, CNF is formed through liberation from the containing fiber-matrix and microfiber bundles (Zimmermann et al. 2004).”
Effect of lignin and hemicellulose on the properties of lignocellulose nanofibril suspensions
Albornoz-Palma, G., Ching, D., Valerio, O., Mendonça, R. T., & Pereira, M. Á. (2020) · Cellulose · doi:10.1007/s10570-020-03304-5 · Cited by 91
Water retention value measurements of cellulosic materials using a centrifuge technique
Cheng, Q., Wang, J., McNeel, J. F., & Jacobson, P. M. (2010) · BioResources · doi:10.15376/biores.5.3.1945-1954 · Cited by 91
“…cellulose (MFC), microcrystalline cellulose (MCC), and fibril aggregate include paper, foods, cosmetics, paints, nonwoven textiles, oil field services, medicine, and polymer reinforcements (Turbak et al. 1983; Yano and Nakahara 2004; Zimmermann et al. 2004; Cheng et al. 2007; Cheng et al. 2009).”
BackgroundModified cellulose morphologies and its composites; SEM and TEM analysis
Krishnamachari, P., Hashaikeh, R., & Tiner, M. (2011) · Micron · doi:10.1016/j.micron.2011.05.001 · Cited by 91
Nanocellulose in Spun Continuous Fibers: A Review and Future Outlook
Clemons, C. C. (2016) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2016.634112 · Cited by 90
Pinto, L. O., Bernardes, J. S., & de Rezende, C. A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.070 · Cited by 88
Development of continuous process enabling nanofibrillation of pulp and melt compounding
Suzuki, K., Okumura, H., Kitagawa, K., Sato, S., Nakagaito, A. N., & Yano, H. (2012) · Cellulose · doi:10.1007/s10570-012-9843-9 · Cited by 88
“Zimmermann et al. (2004) reported that a MFC-reinforced hydroxypropyl cellulose (HPC) prepared by film casting had three times higher tensile modulus and five times higher tensile strength than neat HPC (fiber content 20 wt%).”
BackgroundNanocellulose-Based Materials for Water Pollutant Removal: A Review
Abdelhamid, H. N. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25158529 · Cited by 88
“Sulfite pulp is the term used to describe cellulose fibers that are produced by the pulping process using salts of sulfurous acid [37].”
BackgroundGabr, M. H., Phong, N. T., Abdelkareem, M. A., Okubo, K., Uzawa, K., Kimpara, I., & Fujii, T. J. (2013) · Cellulose · doi:10.1007/s10570-013-9876-8 · Cited by 87
Microfibrillated cellulose from bamboo pulp and its properties
Zhang, J., Song, H., Lin, L., Zhuang, J., Pang, C., & Liu, S. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.06.013 · Cited by 87
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Siqueira, G. D. F., Oksman, K., Tadokoro, S. K., & Mathew, A. P. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.12.001 · Cited by 85
Effect of microfibrillated cellulose on mechanical properties of plain-woven CFRP reinforced epoxy
Gabr, M. H., Elrahman, M. A., Okubo, K., & Fujii, T. J. (2009) · Composite Structures · doi:10.1016/j.compstruct.2009.12.009 · Cited by 84
Schmocker, A. M., Khoushabi, A., Frauchiger, D. A., Gantenbein, B., Schizas, C., Moser, C., Bourban, P. ‐., & Pioletti, D. P. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.02.015 · Cited by 81
“Cellulose fibers showed to be a promising composite material for the reinforcement of the polymeric matrices [36,37].”
BackgroundPoyraz, B., Tozluoğlu, A., Candan, Z., Demir, A., & Yavuz, M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.06.018 · Cited by 80
Drawing of self‐reinforced cellulose films
Gindl‐Altmutter, W., & Kečkéš, J. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25434 · Cited by 79
Correia, V. D. C., dos Santos, V. A., Sain, M. M., dos Santos, S. F., Leão, A. L., & Savastano, H. (2016) · Cellulose · doi:10.1007/s10570-016-0996-9 · Cited by 79
Fashandi, H., Abolhasani, M. M., Sandoghdar, P., Zohdi, N., Li, Q., & Naebe, M. (2016) · Cellulose · doi:10.1007/s10570-016-1070-3 · Cited by 77
“CNCs with whisker-like shape have high tensile strength and an elastic modulus estimated as high as 250 GPa (Zimmermann et al. 2004).”
BackgroundIn situ processing of cellulose nanocomposites
Ray, D., & Sain, S. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.09.007 · Cited by 77
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Thermal and mechanical properties of electrospun nano-celullose reinforced epoxy nanocomposites
Gabr, M. H., Phong, N. T., Okubo, K., Uzawa, K., Kimpara, I., & Fujii, T. J. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.04.010 · Cited by 75
Silvério, H. A., Neto, W. P. F., & Pasquini, D. (2013) · Journal of Nanomaterials · doi:10.1155/2013/289641 · Cited by 75
“It can be highlighted some examples of the studies using as loading, the nanofibers extracted from soybean [29], soybean pods [30], sulphite wood pulp [31], sugar beet [32], kraft pulp [33], microcrystalline cellulose [34], regenerated cellulose fiber and cellulose fiber pure [35].”
Background3 nm Thick Lignocellulose Nanofibers Obtained from Esterified Wood with Maleic Anhydride
Iwamoto, S., & Endo, T. (2014) · ACS Macro Letters · doi:10.1021/mz500787p · Cited by 75
The Effect of Mechanochemical Treatment of the Cellulose on Characteristics of Nanocellulose Films
Barbash, V., Yashchenko, O. V., Алушкін, С. В., Kondratyuk, A. S., Posudievsky, O. Y., & Koshechko, V. G. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-016-1632-1 · Cited by 75
“[29] reported Young’s modulus values of nanofibrillated cellulose films in the range of 5.”
BackgroundPotential of Using Amazon Natural Fibers to Reinforce Cementitious Composites: A Review
de Lima, T. E. S., de Azevedo, A. R. G., Marvila, M. T., Cândido, V. S., Федюк, Р. С., & Monteiro, S. N. (2022) · Polymers · doi:10.3390/polym14030647 · Cited by 74
“to the fiber walls, causing mineralization, resulting in a loss of toughness and strength and compromising the durability of the composite [46,47,112].”
BackgroundInfluentialTEMPO-mediated oxidation of lignocellulosic fibers from date palm leaves
Sbiai, A., Kaddami, H., Sautereau, H. J., Maazouz, A., & Fleury, É. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.005 · Cited by 74
“Indeed the use of such natural product for the reinforcement of thermoplastic or thermosetting resins, leads to composites with lower density, higher specific stiffness and strength, together with a better biodegradability (Bledzki et al., 1999; Mishra et al., 2004; Zimmermann et al., 2004; Gandini, 2008).”
BackgroundDMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils
López-Suevos, F., Eyholzer, C., Bordeanu, N., & Richter, K. (2010) · Cellulose · doi:10.1007/s10570-010-9396-8 · Cited by 75
“Fortunately, partial carboxymethylation of the CNF is well-known to prevent hornification (Bordeanu et al. 2008; Cantiani et al. 2001a, b, c; Cash et al. 2000; Eyholzer et al. 2009; Dinand et al. 1996; Excoffier et al. 1999; Herrick 1984; Laivins and Scallan 1993; Lindstro ¨m and Carlsson 1982), and consequently, carb…”
BackgroundInfluentialAlcalà, M., González, I., Boufi, S., Vilaseca, F., & Mutjé, P. (2013) · Cellulose · doi:10.1007/s10570-013-0085-2 · Cited by 73
“Zimmerman et al. (2004) reported that the”
ResultInfluentialHees, T., Zhong, F., Rudolph, T., Walther, A., & Mülhaupt, R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605586 · Cited by 73
Bandera, D., Sapkota, J., Josset, S., Weder, C., Tingaut, P., Gao, X., Foster, E. J., & Zimmermann, T. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.009 · Cited by 71
Self-citationZheng, X., Zhang, Q., Liu, J., Pei, Y., & Tang, K. (2016) · RSC Advances · doi:10.1039/c6ra12517d · Cited by 70
Bogataj, V. Ž., Fabjan, E. Š., Kasunič, M., Korošec, R. C., Hančič, A., Oven, P., Perše, L. S., & Poljanšek, I. (2014) · Holzforschung · doi:10.1515/hf-2013-0132 · Cited by 69
Preparation and characterization of electrospun PLA/nanocrystalline cellulose‐based composites
Pirani, S. I., Abushammala, H., & Hashaikeh, R. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39576 · Cited by 68
Castro, C. I., Vesterinen, A., Zuluaga, R., Caro, G., Filpponen, I., Rojas, O. J., Kortaberría, G., & Gañán, P. F. (2014) · Cellulose · doi:10.1007/s10570-014-0170-1 · Cited by 68
“The observed increases in mechanical strength have not been reported for PVA reinforced with different cellulosic elements (Zimmermann et al. 2004; Cheng et al. 2009; Lu et al. 2008; Roohani et al. 2008; Lee et al. 2009; Zhang et al. 2011; Qiu and Netravali 2012).”
BackgroundWang, Q., Chen, S., & Chen, D. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.09.009 · Cited by 68
Controlling the transparency and rheology of nanocellulose gels with the extent of carboxylation
Mendoza, D. J., Hossain, L., Browne, C., Raghuwanshi, V. S., Simon, G. P., & Garnier, G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116566 · Cited by 68
Okahisa, Y., Abe, K., Nogi, M., Nakagaito, A. N., Nakatani, T., & Yano, H. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.05.006 · Cited by 67
Paukszta, D., & Borysiak, S. (2013) · Materials · doi:10.3390/ma6072747 · Cited by 67
“nanocomposites has substantially increased [34–41].”
Sofiah, A. G. N., Pasupuleti, J., Samykano, M., Kadirgama, K., Koh, S. P., Kiong, T. S., Pandey, A. K., Yaw, C. T., & Natarajan, S. K. (2023) · Polymers · doi:10.3390/polym15143044 · Cited by 66
Size effects on the nanomechanical properties of cellulose I nanocrystals
Pakzad, A., Simonsen, J., Heiden, P. A., & Yassar, R. S. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2011.288 · Cited by 65
Qin, Y., Qiu, X., & Zhu, J. (2016) · Scientific Reports · doi:10.1038/srep35602 · Cited by 65
Li, K., Mcgrady, D., Zhao, X., Ker, D., Tekinalp, H., He, X., Qu, J., Aytuğ, T., Cakmak, E., Phipps, J., et al. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117525 · Cited by 65
Khan, A., Vu, K. D., Chauve, G., Bouchard, J., Riedl, B., & Lacroix, M. (2014) · Cellulose · doi:10.1007/s10570-014-0361-9 · Cited by 64
Miao, M., Zhao, J., Feng, X., Cao, Y., Cao, S., Zhao, Y., Ge, X., Sun, L., Shi, L., & Fang, J. (2015) · Journal of Materials Chemistry C · doi:10.1039/c4tc02622e · Cited by 62
Nordqvist, D., Idermark, J., Hedenqvist, M. S., Gällstedt, M., Ankerfors, M., & Lindström, T. (2007) · Biomacromolecules · doi:10.1021/bm070246x · Cited by 62
Metadata
- Authors
- Zimmermann, T., Pöhler, E., & Geiger, T.
- Affiliations
- Empa (CH)
- Corresponding author
- Zimmermann, T.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2004-09
- Volume
- 6
- Issue
- 9
- Pages
- 754-761
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1967479815
- Cited by
- 598
- References
- 21
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 20 · 2023: 17 · 2022: 33 · 2021: 30 · 2020: 41 · 2019: 37 · 2018: 28 · 2017: 44 · 2016: 42 · 2015: 39 · 2014: 51 · 2013: 38 · 2012: 46
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- cellulose fibrils, polymer reinforcement, wood cell wall, specific tensile strength, sulfite pulp, nanofibrils, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.