Cellulose Fibrils for Polymer Reinforcement
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Agglomerated cellulose fibrils embedded in a lignin matrix in the cell wall are a predominant reason for the outstanding specific tensile strength of wood. To convert these mechanical properties to practical use for polymer composites, the fibrils were isolated out of sulphite pulp. Depending on the disintegration method, the fibrils have diameters in the nanometer and lengths in the micrometer range.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The sulfuric acid treatment, combined with mechanical dispersion, resulted in finer fibril structures than MFC obtained only by a mechanical treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“Their Young's modulus was determined by different authors to be between 130 GPa [76] and 250 GPa [77].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“The former produced diameters below 50 nm, but their lengths were still in the micrometer range.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“and up to a factor of 3 (fibril content 20 wt%) for HPC nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“They reported that for nanocomposites reinforced with mechanically isolated fibrils, the Young's modulus increased up to a factor of 2.5 (fibril content 10 wt%) for the PVA-nanocomposites”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Gopalan Nair, K., & Dufresne, A. (2003) · Biomacromolecules · doi:10.1021/bm020127b · Cited by 537
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Tashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 7
- A. J. Michell inComposites Asia Pacific 89 Composites Institute of Australia Adelaide Australia 1989 pp. 66.
- S. A. Wainwright W. D. Biggs J. D. Currey J. M. Gosline Princeton University Press Princeton 1982.
- Herrick F.W., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 797
- Turbak A.F., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 815
- L. A. Berglund (Ed.: M. A. D. Mohanty) CRC Press LLC 2004.
- Q. Wu X. Liu L. A. Berglund inProc. 23rd Riso International Symposium on Material Science: Sustainable Natural and Polymeric Composites ‐ Science and Technology(Ed.: H. Lilholt Madsen B. Toftegaard H. L. Cendre E. Megnis M. Mikkelsen L. P. Sorensen B. F.) Riso National Labaratory Roskilde Denmark 2002 pp. 107.
- O. A. Battista Microcrystal Polymer Science Chapter 2 Mc Graw Hill New York 1975.
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“%) for the PVA-nanocomposites, and up to a factor of 3 (fibril content 20 wt”
BackgroundMethodInfluentialCellulose Nanopaper Structures of High Toughness
Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T., & Nishino, T. (2008) · Biomacromolecules · doi:10.1021/bm800038n · Cited by 1,299
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
“Zimmermann, Pöhler, and Geiger (2004) observed that fibril contents of up to 5% resulted in no strength or stiffness improvement of PVOH composites, and they suggested that probably a minimum fibril content is required to induce intense interactions between fibrils and thus the formation of…”
BackgroundResultHenriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
“As a consequence, acid hydrolysis may reduce the reinforcement effect [9].”
BackgroundCellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
“The preparation of cellulose nanofiber reinforced starch [145–150], silk fibroin [151], poly(oxyethylene) (POE) [152–156], polyvinyl alcohol (PVA) [157–161], hydroxypropyl cellulose (HPC) [157, 158], carboxymethyl cellulose (CMC) [162], or soy protein isolate (SPI) [163] has been reported in the literature.”
BackgroundOn the use of nanocellulose as reinforcement in polymer matrix composites
Lee, K.-Y., Aitomäki, Y., Berglund, L. A., Oksman, K., & Bismarck, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.032 · Cited by 819
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Extraction of nanocellulose fibrils from lignocellulosic fibres: A novel approach
Abraham, E., Deepa, B., Pothan, L. A., Jacob, M., Thomas, S., Cvelbar, U., & Anandjiwala, R. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.034 · Cited by 751
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
“Similar to the CNC, the first studies dealing with CNF nanocomposites concentrated on water-soluble or dispersible polymers [58,59] and were performed by Zimmermann et al.”
Recent advances in surface-modified cellulose nanofibrils
Rol, F., Belgacem, M. N., Gandini, A., & Bras, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.002 · Cited by 698
Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites
Iwamoto, S., Nakagaito, A. N., & Yano, H. (2007) · Applied Physics A · doi:10.1007/s00339-007-4175-6 · Cited by 669
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Self-citationNanocellulose properties and applications in colloids and interfaces
Salas, C., Nypelö, T., Rodriguez-Abreu, C., Carrillo, C., & Rojas, O. J. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.10.003 · Cited by 612
“[202] Copyright © 2004 WILEY-VCH Verlag GmbH & Co.”
MethodRecent advances in bacterial cellulose
Huang, Y., Zhu, C., Yang, J., Nie, Y., Chen, C., & Sun, D. (2014) · Cellulose · doi:10.1007/s10570-013-0088-z · Cited by 589
“Preparation of nanofibers by concentrated acid solution is energy consuming, environmentally hazardous, poor thermal stability and also significantly lower degree of polymerization (DP), which therefore reduced its mechanical property in nanocomposites (Zimmermann et al. 2004).”
BackgroundCellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
“Nanocellulose fibers have a diameter of less than 100 nm [94,95] and are separated from pure cellulose using mechanical [45,96–100] or chemical [101,102] approaches.”
MethodH.P.S, A. K., Saurabh, C. K., A.S., A., Nurul Fazita, M. R., Syakir, M. I., Davoudpour, Y., Rafatullah, M., Abdullah, C. K., M. Haafiz, M. K., & Dungani, R. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.028 · Cited by 542
Rojo, E., Peresin, M. S., Sampson, W. W., Hoeger, I. C., Vartiainen, J., Laine, J., & Rojas, O. J. (2015) · Green Chemistry · doi:10.1039/c4gc02398f · Cited by 530
Adhesion and Surface Issues in Cellulose and Nanocellulose
Gardner, D. J., Oporto, G. S., Mills, R., & Samir, M. A. S. A. (2008) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x295509 · Cited by 525
Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential
Zimmermann, T., Bordeanu, N., & Strub, E. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.10.045 · Cited by 519
“Zimmermann et al. / Carbohydrate Polymers 79 (2010) 1086–1093 1087”
BackgroundSelf-citationJunior de Menezes, A., Siqueira, G., Curvelo, A. A. S., & Dufresne, A. (2009) · Polymer · doi:10.1016/j.polymer.2009.07.038 · Cited by 516
Cellulose nanofiber-reinforced polylactic acid
Iwatake, A., Nogi, M., & Yano, H. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.03.006 · Cited by 513
Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
The Effect of Hemicelluloses on Wood Pulp Nanofibrillation and Nanofiber Network Characteristics
Iwamoto, S., Abe, K., & Yano, H. (2008) · Biomacromolecules · doi:10.1021/bm701157n · Cited by 505
Rajinipriya, M., Nagalakshmaiah, M., Robert, M., & Elkoun, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03437 · Cited by 505
Optically transparent composites reinforced with plant fiber-based nanofibers
Iwamoto, S., Nakagaito, A. N., Yano, H., & Nogi, M. (2005) · Applied Physics A · doi:10.1007/s00339-005-3316-z · Cited by 461
Osong, S. H., Norgren, S., & Engstrand, P. (2016) · Cellulose · doi:10.1007/s10570-015-0798-5 · Cited by 434
“Zimmermann et al. (2004) used film-forming techniques to determine the Young’s modulus and tensile strength properties of films.”
MethodPreparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials
Lu, J., Wang, T., & Drzal, L. T. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.02.003 · Cited by 414
Nanocomposite Edible Films from Mango Puree Reinforced with Cellulose Nanofibers
Azeredo, H. M. C., Mattoso, L. H. C., Wood, D., Williams, T. G., Avena‐Bustillos, R. J., & McHugh, T. H. (2009) · Journal of Food Science · doi:10.1111/j.1750-3841.2009.01186.x · Cited by 405
Fast Preparation Procedure for Large, Flat Cellulose and Cellulose/Inorganic Nanopaper Structures
Sehaqui, H., Liu, A., Zhou, Q., & Berglund, L. A. (2010) · Biomacromolecules · doi:10.1021/bm100490s · Cited by 400
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Poly(vinyl alcohol)/cellulose nanocrystal barrier membranes
Paralikar, S. A., Simonsen, J., & Lombardi, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.009 · Cited by 349
Okahisa, Y., Yoshida, A., Miyaguchi, S., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.04.017 · Cited by 346
“Many researchers have been studying the extraction of cellulose nanofibers from biomass materials [5–12].”
BackgroundCellulose: from biocompatible to bioactive material
Credou, J., & Berthelot, T. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00431k · Cited by 335
Nanocellulose nanocomposite hydrogels: technological and environmental issues
Nascimento, D. M., Nunes, Y. L., Figueirêdo, M. C. B., de Azeredo, H. M. C., Aouada, F. A., Feitosa, J. P. A., Rosa, M. F., & Dufresne, A. (2018) · Green Chemistry · doi:10.1039/c8gc00205c · Cited by 332
Stelte, W., & Sanadi, A. R. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9011672 · Cited by 331
Environmental friendly method for the extraction of coir fibre and isolation of nanofibre
Abraham, E., Deepa, B., Pothen, L. A., Cintil, J., Thomas, S., John, M. J., Anandjiwala, R., & Narine, S. S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.056 · Cited by 328
Tingaut, P., Zimmermann, T., & Lopez-Suevos, F. (2010) · Biomacromolecules · doi:10.1021/bm901186u · Cited by 323
Self-citationBacterial cellulose nanocrystals exhibiting high thermal stability and their polymer nanocomposites
George, J., Ramana, K. V., Bawa, A. S., & Siddaramaiah (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2010.09.013 · Cited by 319
Rodionova, G., Lenes, M., Eriksen, Ø., & Gregersen, Ø. (2011) · Cellulose · doi:10.1007/s10570-010-9474-y · Cited by 313
“reinforcement (Wang et al. 2006; Zimmermann et al. 2004; Panaitescu et al. 2008; Nakagaito and Yano 2005; Orts et al. 2005; Favier et al. 1994; Ljungberg et al. 2005) is becoming more and more attractive because of its potential advantages such as relatively low costs, renewability, biodegradability, good mechanical p…”
BackgroundGindl, W., & Keckes, J. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.040 · Cited by 308
Zhao, S., Zhang, Z., Sèbe, G., Wu, R., Rivera Virtudazo, R. V., Tingaut, P., & Koebel, M. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404368 · Cited by 307
Wang, Q. Q., Zhu, J. Y., Gleisner, R., Kuster, T. A., Baxa, U., & McNeil, S. E. (2012) · Cellulose · doi:10.1007/s10570-012-9745-x · Cited by 302
“…but they can also be affected by the degree of fibrillation, feedstock species, etc. Softwood pulps have been extensively used for CNF production (Henriksson et al. 2008; Iwamoto et al. 2007; Nakagaito and Yano 2004; Tejado et al. 2012; Uetani and Yano 2011; Zimmermann et al. 2004).”
BackgroundChakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
“Thereafter, a microfluidizer [52] and aqueous counter collision [53] were proposed as methods of pressurizing.”
MethodElectrospinning Cellulose and Cellulose Derivatives
Frey, M. W. (2008) · Polymer Reviews · doi:10.1080/15583720802022281 · Cited by 296
“Beyond electrospinning, several other routes to forming cellulose nanofibers, including harvesting microbial cellulose 27 34 35 and fibrillating larger cellulose structures, 36–41 have shown progress.”
BackgroundRheology of nanocellulose-rich aqueous suspensions: A Review
Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017) · BioResources · doi:10.15376/biores.12.4.hubbe · Cited by 289
Processing of Polymer Nanocomposites Reinforced with Polysaccharide Nanocrystals
Dufresne, A. (2010) · Molecules · doi:10.3390/molecules15064111 · Cited by 283
“The preparation of polysaccharide particles with reinforced starch [33–42], silk fibroin [42], poly(oxyethylene) (POE) [43–47], polyvinyl alcohol (PVA) [48–52], hydroxypropyl cellulose (HPC) [48,49], carboxymethyl cellulose (CMC) [53] or soy protein isolate (SPI) [54,55] has been reported in the literature.”
BackgroundDynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Self-citationRheological properties of microfibrillar suspension of TEMPO-oxidized pulp
Lasseuguette, E., Roux, D., & Nishiyama, Y. (2008) · Cellulose · doi:10.1007/s10570-007-9184-2 · Cited by 273
“1995), – Composite materials (Zimmermann et al. 2004; Nakagaito and Yano 2004, 2005), due to their morphology and large surface area (Herrick et al.”
BackgroundTrends in the production of cellulose nanofibers from non-wood sources
Pennells, J., Godwin, I. D., Amiralian, N., & Martin, D. J. (2020) · Cellulose · doi:10.1007/s10570-019-02828-9 · Cited by 270
Cellulose nanomaterials: new generation materials for solving global issues
Mokhena, T. C., & John, M. J. (2020) · Cellulose · doi:10.1007/s10570-019-02889-w · Cited by 269
“Microfluidization In 2004, Zimmermann and coworkers were the first to isolate CNFs from sulphite pulp using microfluidization process to obtain CNFs having diameters of 20–100 nm and lengths of several tens of micrometers (Zimmermann et al. 2004).”
MethodTingaut, P., Zimmermann, T., & Sèbe, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32956e · Cited by 266
Self-citationBiocomposites reinforced with cellulose nanocrystals derived from potato peel waste
Chen, D., Lawton, D., Thompson, M. R., & Liu, Q. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.002 · Cited by 265
Nanocellulose for Sustainable Water Purification
Das, R., Lindström, T., Sharma, P. R., Chi, K., & Hsiao, B. S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00683 · Cited by 261
Nanofibrillation of Wood Pulp Using a High-Speed Blender
Uetani, K., & Yano, H. (2011) · Biomacromolecules · doi:10.1021/bm101103p · Cited by 258
Brodin, F. W., Gregersen, Ø. W., & Syverud, K. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p156-166 · Cited by 256
“Various mechanical methods have been applied to obtain fibrillation including homogenization (Herrick et al. 1983), microfluidization (Zimmermann et al. 2004), microgrinding (Iwamoto et al. 2007), refining (Nakagaito, Yano 2004) or cryocrushing (Taniguchi, Okamura 1998).”
MethodTransparent chitosan films reinforced with a high content of nanofibrillated cellulose
Fernandes, S. C. M., Freire, C. S. R., Silvestre, A. J. D., Pascoal Neto, C., Gandini, A., Berglund, L. A., & Salmén, L. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.02.037 · Cited by 252
Wang, S., & Cheng, Q. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30072 · Cited by 249
Methods for Extraction of Nanocellulose from Various Sources
Kargarzadeh, H., Ioelovich, M., Ahmad, I., Thomas, S., & Dufresne, A. (2017) · Handbook of Nanocellulose and Cellulose Nanocomposites · doi:10.1002/9783527689972.ch1 · Cited by 244
Nanocellulose‐Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage
Lv, P., Lu, X., Wang, L., & Feng, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104991 · Cited by 242
Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials
Oun, A. A., Shankar, S., & Rhim, J.-W. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2018.1536966 · Cited by 232
Sugar beet cellulose nanofibril-reinforced composites
Leitner, J., Hinterstoisser, B., Wastyn, M., Keckes, J., & Gindl, W. (2007) · Cellulose · doi:10.1007/s10570-007-9131-2 · Cited by 231
“…modulus of elasticity (9.3 GPa) and for the tensile strength (104 MPa) of cellulose nanofibril sheets obtained in the present study were measured by Zimmermann et al. (2004) for nanofibrillated softwood cellulose sheets (modulus of elasticity = 6 GPa, tensile strength = 100 MPa) and by Bruce et…”
MethodInfluentialNew ways to enhance the functionality of paperboard by surface treatment – a review
Andersson, C. (2008) · Packaging Technology and Science · doi:10.1002/pts.823 · Cited by 218
Besbes, I., Vilar, M. R., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.015 · Cited by 215
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
“1983; Nakagaito and Yano 2004) of cell walls and chemical treatments (Zimmermann et al. 2004; Saito et al. 2006, 2007).”
BackgroundNanocellulose‐Enabled Membranes for Water Purification: Perspectives
Sharma, P. R., Sharma, S. K., Lindström, T., & Hsiao, B. S. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900114 · Cited by 210
Cheng, Q., Wang, S., Rials, T. G., & Lee, S.-H. (2007) · Cellulose · doi:10.1007/s10570-007-9141-0 · Cited by 210
“The other is the mechanical method, which includes a high pressure refiner treatment (Chakraborty et al. 2005), a grinder treatment (Taniguchi 1996), a microfluidizer ( Zimmermann et al. 2004 ), and a high-pressure homogenizer treatment (Dufresne et al. 1997; Herrick et al. 1983; Nakagaito and Yano 2005; Turbak et al.…”
BackgroundMethodTensile and thermal properties of nanocellulose-reinforced poly(vinyl alcohol) nanocomposites
Cho, M.-J., & Park, B.-D. (2011) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2010.10.006 · Cited by 208
Rebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
“Moreover, diameters between 20 and 100 nm and lengths of several tens of micrometers were generated with the use of a microfluidizer in the homogenization step [93,112].”
MethodPreparation and characterisation of cellulose nanofibres
Qua, E. H., Hornsby, P. R., Sharma, H. S. S., & Lyons, G. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5565-x · Cited by 198
Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive
Kaboorani, A., Riedl, B., Blanchet, P., Fellin, M., Hosseinaei, O., & Wang, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.08.008 · Cited by 198
“[30], Favier et al.”
The Critical Roles of Water in the Processing, Structure, and Properties of Nanocellulose
Jing, S., Wu, L., Siciliano, A. P., Chen, C., Li, T., & Hu, L. (2023) · ACS Nano · doi:10.1021/acsnano.3c06773 · Cited by 198
Nanocellulose-Based Composites and Bioactive Agents for Food Packaging
Khan, A., Huq, T., Khan, R. A., Riedl, B., & Lacroix, M. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.578765 · Cited by 196
“For example, Zimmermann et al. (2004) dispersed MFC into PVOH and generated fibril-reinforced PVOH nanocomposites (fibril content 20 wt”
MethodPAPER CHEMISTRY: Approaching super-hydrophobicity from cellulosic materials: A Review
Song, J., & Rojas, O. J. (2013) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2013-28-02-p216-238 · Cited by 192
“…(NFC), another form of nanocellulose (Turbak 1983) can be isolated through high-shear mechanical disintegration and homogenization of cellulose fibers (Adbelgawad et al. 2013; Ferrer et al. 2012a; Henriksson et al. 2008; Spence et al. 2010a; 2010b; Zimmermann et al. 2010; Zimmermann et al. 2004).”
BackgroundA new quality index for benchmarking of different cellulose nanofibrils
Desmaisons, J., Boutonnet, E., Rueff, M., Dufresne, A., & Bras, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.032 · Cited by 192
Nanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Johnson, R. K., Zink-Sharp, A., Renneckar, S. H., & Glasser, W. G. (2009) · Cellulose · doi:10.1007/s10570-008-9269-6 · Cited by 178
“This is a commonly observed effect in cellulose-based nanocomposite systems found in several cellulosebased nanocomposite reports (Favier et al. 1995; Helbert et al. 1996; Chazeau et al. 1999; Samir et al. 2004; Ljungberg et al. 2005; Dalmas et al. 2007; Svagan et al. 2007).”
BackgroundThe behaviour of cationic NanoFibrillar Cellulose in aqueous media
Olszewska, A., Eronen, P., Johansson, L., Malho, J., Ankerfors, M., Lindström, T., Ruokolainen, J., Laine, J., & Österberg, M. (2011) · Cellulose · doi:10.1007/s10570-011-9577-0 · Cited by 178
The Nanofication and Functionalization of Bacterial Cellulose and Its Applications
Choi, S. M., & Shin, E. J. (2020) · Nanomaterials · doi:10.3390/nano10030406 · Cited by 175
Waste paper: An underutilized but promising source for nanocellulose mining
Kumar, V., Pathak, P., & Bhardwaj, N. K. (2020) · Waste Management · doi:10.1016/j.wasman.2019.10.041 · Cited by 175
Nanofibrillation of pulp fibers by twin-screw extrusion
Ho, T. T. T., Abe, K., Zimmermann, T., & Yano, H. (2015) · Cellulose · doi:10.1007/s10570-014-0518-6 · Cited by 174
“With 10–15 times passing through the high-shear homogenizer, the aspect ratio of cellulose fibers increased, while further passes (e.g., 20 times) caused the agglomeration of fibrils due to the increase of surface area (Lee et al. 2009b) and surface hydroxyl groups (Zimmermann et al. 2004).”
InfluentialSelf-citationMartins, N. C. T., Freire, C. S. R., Pinto, R. J. B., Fernandes, S. C. M., Pascoal Neto, C., Silvestre, A. J. D., Causio, J., Baldi, G., Sadocco, P., & Trindade, T. (2012) · Cellulose · doi:10.1007/s10570-012-9713-5 · Cited by 174
Nguyen, H.-L., Tran, T. H., Hao, L. T., Jeon, H., Koo, J. M., Shin, G., Hwang, D. S., Hwang, S. Y., Park, J., & Oh, D. X. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118421 · Cited by 172
Sun, X., Lu, C., Liu, Y., Zhang, W., & Zhang, X. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.09.088 · Cited by 172
Im, S. H., Jung, Y., & Kim, S. H. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.019 · Cited by 171
General scenarios of cellulose and its use in the biomedical field
Gopi, S., Balakrishnan, P., Divya, C., Poovathankandy, D., & Thomas, S. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.04.012 · Cited by 171
Bhat, A. H., Khan, I., Usmani, M. A., Umapathi, R., & Al-Kindy, S. M. Z. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.190 · Cited by 169
Jiang, J., Zhu, Y., & Jiang, F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118188 · Cited by 169
Ho, T. T. T., Zimmermann, T., Hauert, R., & Caseri, W. (2011) · Cellulose · doi:10.1007/s10570-011-9591-2 · Cited by 168
“For instance, composites of poly(vinyl alcohol) and 10% w/w NFC or of hydroxypropyl cellulose and 20% w/w NFC possess moduli of elasticity which are 3 times higher compared to that of the neat polymer (Zimmermann et al. 2004).”
BackgroundMethodInfluentialSelf-citationFrom paper to nanopaper: evolution of mechanical and physical properties
González, I., Alcalà, M., Chinga‐Carrasco, G., Vilaseca, F., Boufi, S., & Mutjé, P. (2014) · Cellulose · doi:10.1007/s10570-014-0341-0 · Cited by 168
“The Young’s modulus of a single, highly crystalline nanofibril has been reported to be between 30 and 250 GPa, depending on the author (Yano and Nakahara 2004; Zimmerman et al. 2004; Iwamoto et al. 2009; Saito et al. 2013; Alcala et al. 2013); this variation of results may be a consequence of the different sources of…”
BackgroundBioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions
Wei, J., Pan, F., Ping, H., Yang, K., Wang, Y., Wang, Q., & Fu, Z. (2023) · Research · doi:10.34133/research.0164 · Cited by 168
Hydrophobic cellulose nanopaper through a mild esterification procedure
Sehaqui, H., Zimmermann, T., & Tingaut, P. (2014) · Cellulose · doi:10.1007/s10570-013-0110-5 · Cited by 166
“biocomposites (Sehaqui et al. 2011a, d; Zimmermann et al. 2004; Tingaut et al. 2010).”
BackgroundSelf-citation
Metadata
- Authors
- Zimmermann, T., Pöhler, E., & Geiger, T.
- Affiliations
- Empa (CH)
- Corresponding author
- Zimmermann, T.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2004-09
- Volume
- 6
- Issue
- 9
- Pages
- 754-761
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1967479815
- Cited by
- 598
- References
- 21
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 20 · 2023: 17 · 2022: 33 · 2021: 30 · 2020: 41 · 2019: 37 · 2018: 28 · 2017: 44 · 2016: 42 · 2015: 39 · 2014: 51 · 2013: 38 · 2012: 46
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- cellulose fibrils, polymer reinforcement, wood cell wall, specific tensile strength, sulfite pulp, nanofibrils, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.