Cellulose Fibrils for Polymer Reinforcement
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Agglomerated cellulose fibrils embedded in a lignin matrix in the cell wall are a predominant reason for the outstanding specific tensile strength of wood. To convert these mechanical properties to practical use for polymer composites, the fibrils were isolated out of sulphite pulp. Depending on the disintegration method, the fibrils have diameters in the nanometer and lengths in the micrometer range.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The sulfuric acid treatment, combined with mechanical dispersion, resulted in finer fibril structures than MFC obtained only by a mechanical treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“Their Young's modulus was determined by different authors to be between 130 GPa [76] and 250 GPa [77].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“The former produced diameters below 50 nm, but their lengths were still in the micrometer range.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“and up to a factor of 3 (fibril content 20 wt%) for HPC nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“They reported that for nanocomposites reinforced with mechanically isolated fibrils, the Young's modulus increased up to a factor of 2.5 (fibril content 10 wt%) for the PVA-nanocomposites”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Gopalan Nair, K., & Dufresne, A. (2003) · Biomacromolecules · doi:10.1021/bm020127b · Cited by 537
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Tashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 7
- A. J. Michell inComposites Asia Pacific 89 Composites Institute of Australia Adelaide Australia 1989 pp. 66.
- S. A. Wainwright W. D. Biggs J. D. Currey J. M. Gosline Princeton University Press Princeton 1982.
- Herrick F.W., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 797
- Turbak A.F., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 815
- L. A. Berglund (Ed.: M. A. D. Mohanty) CRC Press LLC 2004.
- Q. Wu X. Liu L. A. Berglund inProc. 23rd Riso International Symposium on Material Science: Sustainable Natural and Polymeric Composites ‐ Science and Technology(Ed.: H. Lilholt Madsen B. Toftegaard H. L. Cendre E. Megnis M. Mikkelsen L. P. Sorensen B. F.) Riso National Labaratory Roskilde Denmark 2002 pp. 107.
- O. A. Battista Microcrystal Polymer Science Chapter 2 Mc Graw Hill New York 1975.
Cited by
Items 601–685 of 685
Croucher, M., Gupta, R. K., GangaRao, H. V. S., Cairns, D. R., Wang, J., Shi, X., Linnell, J., Facemyer, K., Ritchie, D., & Tucker, J. (2009) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/986587
Polymers, Adhesion, and Paper Materials
Zhao, B., Arunbabu, D., & McDonald, B. (2013) · Wiley eBooks · doi:10.1002/9781118505175.ch12
Cellulosic nanofibre composites
van den Oever, M. J. A., Sanchez, G. P., & Yılmaz, G. (2008) · Wageningen University & Research Publications
Surface modification of cellulose nanofibrils toward new bio-based polymer nanocomposites
藤澤秀次 (2014) · Institutional Repositories DataBase (IRDB) · doi:10.15083/00006908
Wang, X., Wu, Y., & Huang, J. T. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.393-395.1405
Morphology and Mechanical Properties of a Novel Cellulose Nanofibers Based Nanocomposites
Xue, Y., Li, D. G., Deng, Q., Wang, Y. M., & Lin, D. L. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.174-177.936
Lee, J. A., Yoon, M. J., Kim, K.-Y., & Lim, D. Y. (2013) · Textile Science and Engineering · doi:10.12772/tse.2013.50.386
Fenton Pre-treatment of a Birch Kraft Pulp for MFC preparation
Hellström, P. (2015) · DiVA (Digitala Vetenskapliga Arkivet)
Development of Nanocomposites with Cellulose Nanofiber and Thermoplastics,and Microcellular Foaming
Kitagawa, K., Semba, T., Ito, A., & Uesaka, T. (2013) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.86.35
TRENDS OF PRODUCTION OF COMPOSITE MATERIALS FROM WASTE WOOD
Olegovich, S. A., & State, V. (2012) · Polythematic Online Scientific Journal of Kuban State Agrarian University
Microstructural design of high performance natural fibre reinforced vinyl-ester eco-nanocomposites
Alhuthali, A. M. S. (2013) · eSpace (Curtin University)
Composites of trimethylammonium-modified nanofibrillated cellulose and layered silicates
Ho, T. T. T. (2012) · DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) · doi:10.3929/ethz-a-007608517
Sethaphong, L. (2013) · NCSU Libraries Repository (North Carolina State University Libraries)
Preparation and Properties of Nanocellulose Films
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00005-8
Isolation of Cellulose Nanofibres: Elucidation of a Novel Approach Utilizing Fungal Pretreatment
Janardhnan, S. (2012) · TSpace (University of Toronto)
Characterization of Nanocellulose
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00006-x
Chapter 7 Dielectric Properties of Bionanocomposites
Gong, G., & Li, B. (2016) · Pan Stanford Publishing eBooks · doi:10.1201/9781315364490-8
Filmes de base polimérica reforçados com fibras celulósicas para aplicações na indústria alimentar
de Jesus, S. M. B. (2016) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
EXTRAÇÃO, MODIFICAÇÃO E APLICAÇÃO DA FIBRA DO BAGAÇO DE MANDIOCA (Manihot esculenta Crantz)
Travalini, A. P. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Les propriétés de papiers structurés en direction Z à base de nanocellulose fibrillée
Charfeddine, M. A. (2017) · Le dépôt institutionnel (Université du Québec à Trois-Rivières)
Leplanois, T. (2017) · Espace ÉTS (ETS)
水中カウンターコリジョンにより得られるセルロースナノファイバーがポリビニルアルコールとの相互作用で誘発する特異なナノサイズ効果
石川, 元. (2018) · Institutional Repositories DataBase (IRDB) · doi:10.15017/1931971
Molecular Engineering of Nanocellulose for Biomedical Applications
Weishaupt, R. (2018) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000267877
Electrospinning Technology: Cellulose and Cellulose Derivatives
Frey, M. W. (2015) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120052052
Use of nanocellulose for security paper
Desmaisons, J. (2018) · theses.fr (ABES) · doi:10.70675/2b18b890z9946z454dz8387z4920dc840ec4
Elaboration de matelas à base de fibres de verre par voie humide
Lozano, F. (2019) · theses.fr (ABES) · doi:10.70675/391a4911zeb47z4853zb112z1171bc317416
Dynamic Heterogeneous Hydrogels with Cellulose Nanocrystals
Huang, H. (2019) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-7361
Thermo-responsive cellulose hydrogels by grafting low-molecular-weight polymer chains
Sakarinen, E. (2019) · Aaltodoc (Aalto University)
Development of novel methods for production of cellulose-based materials
Khanjani, P. (2019) · Aaltodoc (Aalto University)
Gabr, M. H., Phong, N. T., Okubo, K., & Fujii, T. (2012) · The International Conference on Applied Mechanics and Mechanical Engineering · doi:10.21608/amme.2012.36943
“A higher concentration threshold is required to introduce interactions between fibrils so that a network can be formed [23].”
BackgroundDevelopment of Cellulose Nanofiber Reinforced Poly(Methyl Methacrylate)
Bennett, T. H. (2019) · Scholarship@Western (Western University)
Ferreira, P. J. (2019) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Oliver, R., Morehead, S., Hunt, J., Perry, J. J. B., Downs, R., & Kangas, H. (2020) · Northumbria Research Link (Northumbria University)
Gluten replacement and starch reduction in producing gluten free bread
Ren, Y. (2020) · Nottingham ePrints (University of Nottingham)
Main, N. M. (2018) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia)
Zhang, X. (2020) · Aaltodoc (Aalto University)
Cellulose Fiber (Cellulose Nanofiber)
Date, T. (2021) · Seikei-Kakou · doi:10.4325/seikeikakou.33.125
Cellulose Nanorods in Liquid Crystalline Elastomers for Improved Actuators
Pontes, R. V. (2014) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Andrieux, S. (2019) · Springer theses · doi:10.1007/978-3-030-27832-8_2
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_16
Picu, C. R. (2022) · Cambridge University Press eBooks · doi:10.1017/9781108779920.012
Osolnik, U., Vek, V., Oven, P., & Poljanšek, I. (2023) · Les/Wood · doi:10.26614/les-wood.2023.v72n02a06
Cellulosic Nanomaterials and Its Derivatives from Agro‐Waste for Food Packaging Applications
Ranjan, R., Rai, R., Kumar, V., Bhatt, S. B., & Dhar, P. (2024) · Wiley eBooks · doi:10.1002/9781394175161.ch13
Carbon Capture Utilization for Bio-Based Building Insulation Foams
Oluwabunmi, K. E. (2021) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc1833562
Preparation and Performance of MFC Films from Discarded Cotton Fibers
Xu, X., Zhang, X., Wang, J., Liu, X., Zheng, R., & Wu, Y. (2025) · JOM · doi:10.1007/s11837-025-07283-5
Application of cellulose nanofibrils in polyvinyl alcohol composite films
Duan, L., Chen, C., Hou, X., & Liu, B. (2025) · Functional materials · doi:10.15407/fm32.01.97
Green and sustainable nanocellulose production
Abdelhamid, H. N. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29131-9.00004-9
Synthesis and characterization of new polymeric materials for advanced applications
Sanna, R. (2014) · UnissResearch (Università degli Studi di Sassari)
Characterization of non-processed and processed dietary fibers
Mhamadi, M. (2022) · Corpus Université Laval (Université Laval)
Fibrilloitujen nanoselluloosarakenteiden valmistusmenetelmät ja lujuusominaisuudet
Kemppainen, M. (2018) · Aaltodoc (Aalto University)
Lalanne-Tisné, M. (2023) · Lirias
Preparación de nanofibras de celulosa para el desarrollo de envases compostables.
González Vicente, P., Becerril, R., & de la Puerta, C. N. (2023) · Zaguan (Universidad de Zaragoza)
セルロースナノファイバー添加によるポリエチレンオキシド結晶の配向制御とその構造解析に関する研究
福谷, 実., & Fukuya, M. N. (2018) · Institutional Repositories DataBase (IRDB)
Biopolymeric particles and their potential industrial applications
SafariMohsenabad, S. (2016) · doi:10.82308/743
Ensete ventricosum natural fibres as reinforcement in textile reinforced concrete
Beyene, M. T. (2023) · VUBIR (Vrije Universiteit Brussel)
Thermodynamica van interacties aan nanocellulose oppervlakken
Lombardo, S. (2019) · Lirias
Production of temporary bone scaffold reinforced with OPEFB-CMC from oil palm empty fruit bunch
Yusup, E. M. (2015) · UTHM Institutional Repository (Universiti Tun Hussein Onn Malaysia)
Beneficiation of pulp and paper mill sludge: production of cellulose nanofibrils (CNFs).
Jele, T. B. (2022) · ResearchSpace (University of KwaZulu-Natal)
Silva, D. L. (2016) · Americanae (AECID Library)
Peces, R. A. (2016) · Queen Mary Research Online (Queen Mary University of London)
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-2
Sistemas de Transportes: Características Técnicas e Econômicas de suas Modalidades
Valente, A. M., & Lobo, E. (2026) · Seven Editora eBooks · doi:10.56238/livrosindi202608-001
Nakagaito, A. N., & Takeda, K. (2026) · International Journal of Modern Physics B · doi:10.1142/s021797922640014x
Ryu, J., Choi, S. R., Yang, J.-K., & Lee, J. M. (2026) · Polymers · doi:10.3390/polym18050610
“The aspect ratio of the reinforcement has been reported to enhance the mechanical properties of the composite material by dispersing it within the range of 10 to 80 [32].”
Palange, C. (2020) · Bristol Research (University of Bristol)
水中カウンターコリジョンにより付与される両親媒性“ヤヌス型”セルロースナノファイバーの可視化法による表面特性解析
Tsuji, T. (2021) · Institutional Repositories DataBase (IRDB)
Posidonia waste valorisation for the production of high added-value bio-based materials
Khadraoui, M. (2022) · theses.fr (ABES) · doi:10.70675/f7f7a10az4d02z45f1z936fz46cc45306d09
Conception d’actionneurs à base de nanofibres de cellulose induits par l’eau
da Costa, L. L. (2023) · theses.fr (ABES) · doi:10.70675/493da2fbzf7ecz41d4z9e41z60e2f41ce6b5
More environmentally friendly fishing gear through material science
Gué, L. L. (2024) · theses.fr (ABES) · doi:10.70675/3cf93d33z3665z4dc0zb099z9320fe9c1fcc
Atlas, S., Ghorbel, N., Ilsouk, M., Arous, M., & Raihane, M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-26606-5.00007-3
Bioresorbable Scaffolds for Coronary Arteries: Where Do We Stand Today?
Matsuda, J., Watanabe, T., Yuhara, S., Kelly, J. M., Kurobe, H., & Shinoka, T. (2026) · VIEW Medicine · doi:10.1002/vmd2.70001
Nanotechnology in wood science: Revolutionizing durability, sustainability and performance
Manish, M. (2026) · Plant Science Today · doi:10.14719/pst.13689
Unified scaling of network strength in cellulose nanofibrils from dilute suspensions to dense mats
Ryu, J., & Youn, H. J. (2026) · BioResources · doi:10.15376/biores.21.3.6726-6740
박테리아 셀룰로오스 기반 기능성 나노복합체의 제조와 특성 및 응용 연구
박민성 (2016) · Seoul National University Open Repository (Seoul National University)
The Creation of Commodity Sokasi using Local Products in Bali Made from Bamboo Stem Fiber Composite
Nyoman Arya Wigraha, D. K. (2023) · Journal for ReAttach Therapy and Developmental Diversities
Polymeric Films Reinforced with Cellulosic Fibers for Applications in the Food Industry
de Jesus, S. M. B. (2016) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Nanocelulloses in the papermaking industry: production, properties, characterization and uses
Ferreira, P. J. (2019) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Metadata
- Authors
- Zimmermann, T., Pöhler, E., & Geiger, T.
- Affiliations
- Empa (CH)
- Corresponding author
- Zimmermann, T.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2004-09
- Volume
- 6
- Issue
- 9
- Pages
- 754-761
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1967479815
- Cited by
- 598
- References
- 21
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 20 · 2023: 17 · 2022: 33 · 2021: 30 · 2020: 41 · 2019: 37 · 2018: 28 · 2017: 44 · 2016: 42 · 2015: 39 · 2014: 51 · 2013: 38 · 2012: 46
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- cellulose fibrils, polymer reinforcement, wood cell wall, specific tensile strength, sulfite pulp, nanofibrils, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.