Cellulose Fibrils for Polymer Reinforcement
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Agglomerated cellulose fibrils embedded in a lignin matrix in the cell wall are a predominant reason for the outstanding specific tensile strength of wood. To convert these mechanical properties to practical use for polymer composites, the fibrils were isolated out of sulphite pulp. Depending on the disintegration method, the fibrils have diameters in the nanometer and lengths in the micrometer range.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The sulfuric acid treatment, combined with mechanical dispersion, resulted in finer fibril structures than MFC obtained only by a mechanical treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“Their Young's modulus was determined by different authors to be between 130 GPa [76] and 250 GPa [77].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“The former produced diameters below 50 nm, but their lengths were still in the micrometer range.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“and up to a factor of 3 (fibril content 20 wt%) for HPC nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
In the citing paper
“They reported that for nanocomposites reinforced with mechanically isolated fibrils, the Young's modulus increased up to a factor of 2.5 (fibril content 10 wt%) for the PVA-nanocomposites”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [77]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Gopalan Nair, K., & Dufresne, A. (2003) · Biomacromolecules · doi:10.1021/bm020127b · Cited by 537
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Tashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 7
- A. J. Michell inComposites Asia Pacific 89 Composites Institute of Australia Adelaide Australia 1989 pp. 66.
- S. A. Wainwright W. D. Biggs J. D. Currey J. M. Gosline Princeton University Press Princeton 1982.
- Herrick F.W., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 797
- Turbak A.F., 1983, J. Appl. Polymer Sci. Appl. Polymer Symp., 37, 815
- L. A. Berglund (Ed.: M. A. D. Mohanty) CRC Press LLC 2004.
- Q. Wu X. Liu L. A. Berglund inProc. 23rd Riso International Symposium on Material Science: Sustainable Natural and Polymeric Composites ‐ Science and Technology(Ed.: H. Lilholt Madsen B. Toftegaard H. L. Cendre E. Megnis M. Mikkelsen L. P. Sorensen B. F.) Riso National Labaratory Roskilde Denmark 2002 pp. 107.
- O. A. Battista Microcrystal Polymer Science Chapter 2 Mc Graw Hill New York 1975.
Cited by
Items 301–400 of 685
Water Soluble Polymer-Based Nanocomposites Containing Cellulose Nanocrystals
George, J., Sabapathy, S. N., & Siddaramaiah (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_9 · Cited by 32
Cellulose nano-particles from Pandanus: viscometric and crystallographic studies
Chenampulli, S., Unnikrishnan, G. P., Sujith, A., Thomas, S., & Francis, T. (2012) · Cellulose · doi:10.1007/s10570-012-9831-0 · Cited by 32
“Zimmermann et al. (2004) have established the relationship between aspect ratio and degree of polymerization.”
BackgroundPreparation of porous sheets with high mechanical strength by the addition of cellulose nanofibrils
Sim, K., & Youn, H. J. (2016) · Cellulose · doi:10.1007/s10570-016-0865-6 · Cited by 32
“In addition, cellulose-based nanofibers, called cellulose nanofibrils (CNF), can be obtained by the mechanical shearing action of natural pulp fibers (Abe et al. 2007; Zimmermann et al. 2004).”
BackgroundExperimental Investigation of ABS Matrix and Cellulose Fiber Reinforced Polymer Composite Materials
Ponsuriyaprakash, S., Udhayakumar, P., & Pandiyarajan, R. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1841065 · Cited by 32
“…filler with an excellent aspect ratio (Devabaktuni et al. 2011; Moon et al. 2011), while rendering ultimate mechanical properties generated by hydrogen bonding with high crystallinity (Agustin, Nakatsubo, and Yano 2018; Johari et al. 2016; Thoorens et al. 2014; Zimmermann, Pohler, and Geiger 2004).”
BackgroundCastro, C. I., Zuluaga, R., Rojas, O. J., Filpponen, I., Orelma, H., Londoño, M. E., Betancourt, S., & Gañán, P. F. (2015) · RSC Advances · doi:10.1039/c5ra16966f · Cited by 31
Yihun, F. A., Ifuku, S., Saimoto, H., & Yihun, D. A. (2021) · Cellulose · doi:10.1007/s10570-021-03719-8 · Cited by 31
“…and paper sizing, asbestos alternatives, pharmaceutical and food packaging materials and others (DeMerlis and Schoneker 2003; Fan et al. 2015; Gaaz et al. 2015; Jaiturong et al. 2018; Lee et al. 2012; Lim et al. 2015; Shang and Peng 2007; Suh et al. 2010; Thong et al. 2016; Zimmermann et al. 2004).”
BackgroundPreparation and properties of microfibrillated cellulose with different carboxyethyl content
Chen, J., Liu, J., Su, Y., Xu, Z.-H., Li, M.-C., Ying, R., & Wu, J.-Q. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.024 · Cited by 31
Farahbakhsh, N., Venditti, R. A., & Jur, J. S. (2014) · Cellulose · doi:10.1007/s10570-014-0285-4 · Cited by 30
Boissard, C. I. R., Bourban, P. ‐., Tingaut, P., Zimmermann, T., & Månson, J. E. (2011) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411407233 · Cited by 29
Self-citationRoy, D., Kotula, A. P., Natarajan, B., Gilman, J. W., Fox, D. M., & Migler, K. B. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.007 · Cited by 29
Singh, S. S., Salem, D. R., & Sani, R. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820084-1.00018-1 · Cited by 28
Characterization of Biomaterials based on Microfibrillated Cellulose with Different Modifications
Rampinelli, G., Landro, L. D., & Fujii, T. J. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684409335453 · Cited by 28
Wu, Q., Sundborg, H., Andersson, R. L., Peuvot, K., Guex, L., Nilsson, F., Hedenqvist, M. S., & Olsson, R. T. (2017) · RSC Advances · doi:10.1039/c7ra01082f · Cited by 28
Tajik, M., Torshizi, H. J., Resalati, H., & Hamzeh, Y. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.199 · Cited by 28
Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals
Ma, L., Wang, L., Wu, L., Zhuo, D., Weng, Z., & Ren, R. (2014) · Cellulose · doi:10.1007/s10570-014-0405-1 · Cited by 28
Effect of drying pretreatment on the acetylation of nanofibrillated cellulose
Bogataj, V. Ž., Poljanšek, I., Oven, P., Škapin, A. S., & Hančič, A. (2015) · BioResources · doi:10.15376/biores.10.4.8148-8167 · Cited by 27
High strength modified nanofibrillated cellulose-polyvinyl alcohol films
Virtanen, S., Vuoti, S., Heikkinen, H. A., & Lahtinen, P. (2014) · Cellulose · doi:10.1007/s10570-014-0347-7 · Cited by 27
“Preparation of biocomposites based on starch and cellulose incorporated in PVA matrices has been widely reported (Chai et al. 2012; Jipa et al. 2012; Lu et al. 2008; Tang and Liu 2008; Zhang et al. 2011; Wang and Sain 2007; Wan et al. 2006; Bhatnagar and Sain 2005; Zimmerman et al. 2004; Bulota et al. 2011; Hrabalova…”
BackgroundAffordable Magnetic Hydrogels Prepared from Biocompatible and Biodegradable Sources
Baron, R. I., Biliuță, G., Socoliuc, V., & Coseri, S. (2021) · Polymers · doi:10.3390/polym13111693 · Cited by 27
“On the other hand, PVA is a water-soluble synthetic polymer that is completely biodegradable and widely used in the production of biodegradable hybrid materials with application in various fields, such as packaging [15], water filtration [16], paper [17], and film production [18,19].”
BackgroundFunctional Polymer Nanocomposite Materials from Microfibrillated Cellulose
Tingaut, P., Eyholzer, C., & Zimmerm, T. (2011) · InTech eBooks · doi:10.5772/20817 · Cited by 27
Hrabalova, M., Schwanninger, M., Wimmer, R., Gregorová, A., Zimmermann, T., & Mundigler, N. (2011) · BioResources · doi:10.15376/biores.6.2.1631-1647 · Cited by 26
Self-citationZhao, N. R., Zhu, C., Mark, L. H., Park, C. B., & Li, Q. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42551 · Cited by 26
ABSORBENT MATERIALS BASED ON KRAFT PULP: PREPARATION AND MATERIAL CHARACTERIZATION
Brodin, F. W., & Theliander, H. (2012) · BioResources · doi:10.15376/biores.7.2.1666-1683 · Cited by 26
“Since the mechanical treatment in the preparation of MFC has a high energy demand, several different pretreatment methods have been proposed, including acid hydrolysis (Zimmerman et al. 2004; Henriksson et al. 2008) or enzymatic hydrolysis (Paakko et al. 2007; Henriksson et al. 2008).”
MethodBiomaterial Wood: Wood-Based and Bioinspired Materials
Burgert, I., Keplinger, T., Cabane, É., Merk, V. M., & Rüggeberg, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-802185-9.00013-9 · Cited by 26
Nanocellulose Aerogels as Thermal Insulation Materials
Duong, H. M., & Nguyen, S. T. (2016) · Springer eBooks · doi:10.1007/978-3-319-27505-5_15 · Cited by 26
Bionanomaterial from agricultural waste and its application
Dungani, R., Khalil, H. P. S. A., Aprilia, N. A. S., Sumardi, I., Aditiawati, P., Darwis, A., Karliati, T., Sulaeman, A., Rosamah, E., & Riza, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00003-6 · Cited by 26
Cui, X., Hiraoka, T., Honda, T., Hsu, Y., Asoh, T., & Uyama, H. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108595 · Cited by 26
Cellulose nanofillers for food packaging
Olsson, R. T., Fogelström, L., Martínez‐Sanz, M., & Henriksson, M. (2011) · Elsevier eBooks · doi:10.1533/9780857092786.1.86 · Cited by 25
Bogataj, V. Ž., Poljanšek, I., Oven, P., & Čop, M. (2016) · Holzforschung · doi:10.1515/hf-2016-0096 · Cited by 25
Lignocellulose-Based Nanoparticles and Nanocomposites: Preparation, Properties, and Applications
Deepa, B., Chirayil, C. J., Pothan, L. A., & Thomas, S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816354-2.00004-9 · Cited by 25
Nanocellulose Composite Biomaterials in Industry and Medicine
Shoseyov, O., Kam, D., Shalom, T. B., Shtein, Z., Vinkler, S., & Posen, Y. (2019) · Biologically-inspired systems · doi:10.1007/978-3-030-12919-4_17 · Cited by 25
Thermo-compression of cellulose nanofibrils
Rol, F., Rouilly, A., & Bras, J. (2019) · Cellulose · doi:10.1007/s10570-019-02720-6 · Cited by 25
“…fibers (Bhatnagar and Sain 2005; Taipale et al. 2010; Nair et al. 2014; Kondo et al. 2014; Nechyporchuk et al. 2015) such as high pressure homogenizer (Turbak et al. 1983), grinder (Taniguchi and Okamura 1998) or microfluidizer (Zimmermann et al. 2004), as recently reviewed by Rol et al. (2018).”
BackgroundMitbumrung, W., Rungraung, N., Muangpracha, N., Akanitkul, P., & Winuprasith, T. (2022) · Polymers · doi:10.3390/polym14020327 · Cited by 25
“The study from [46] showed that NFC from wood pulp by a mechanical method (using a rotorstator nd a microfluidizer) has a diameter of between 20 to 100 nm with a degree of polymerization (DP) at 643, as well a , NFC from wood pulp by chemical pretreatment followed by mechanica method (10%sulfuric a id a d microfluidiz…”
MethodCellulose Nanocomposites for High-Performance Applications
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_21 · Cited by 25
Click chemistry route to covalently link cellulose and clay
Yadav, P., Chacko, S., Kumar, G. S., Ramapanicker, R., & Verma, V. (2015) · Cellulose · doi:10.1007/s10570-015-0594-2 · Cited by 25
“Due to its high availability, recyclability and biodegradability, cellulose is widely used in many industries, including but not limited to, paper production, pharmaceutics, food, and reinforcement in polymer composites (Okiyama et al. 1992; Bledzki and Gassan 1999; Zimmermann et al. 2004; Orts et al. 2005; Coffey et…”
BackgroundWongvasana, B., Thongnuanchan, B., Masa, A., Saito, H., Sakai, T., & Lopattananon, N. (2022) · Polymers · doi:10.3390/polym14183747 · Cited by 24
CHARACTERIZATION OF NATURAL FIBER REINFORCED COMPOSITES-BAMBOO AND SISAL: A REVIEW
Singh, T. J. (2014) · International Journal of Research in Engineering and Technology · doi:10.15623/ijret.2014.0319034 · Cited by 24
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24447 · Cited by 24
Emara, L. H., El-Ashmawy, A. A., Taha, N. F., Shaffei, K. E., Mahdey, E.-S., & El-Kholly, H. K. (2016) · Journal of Applied Pharmaceutical Science · doi:10.7324/japs.2016.60205 · Cited by 23
“However, new methods using super grinder treatment or high-pressure refiner (Chakraborty et al., 2005; Yano et al., 2005), microfluidizer (Zimmermann et al., 2004), and high-pressure homogenizer treatment (Herrick et al., 1983; Dufresne et al., 1997; Nakagaito and Yano, 2005) have been proposed.”
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova, O. I., & Чвалун, С. Н. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16050047 · Cited by 23
Towards standardization of laboratory preparation procedure for uniform cellulose nanopapers
Parit, M., Aksoy, B., & Jiang, Z. (2018) · Cellulose · doi:10.1007/s10570-018-1759-6 · Cited by 23
“…et al. 2008; Nogi et al. 2009) or hot pressing (Nakagaito and Yano 2005; Nogi et al. 2009), and air/oven drying of the cellulose nanofiber suspension (suspension casting) (Andresen et al. 2007; Chinga-Carrasco et al. 2013; Dufresne et al. 1997; Taniguchi and Okamura 1998; Zimmermann et al. 2004).”
BackgroundMatsumoto, Y., Shundo, A., Hayashi, H., Tsuruzoe, N., & Tanaka, K. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01866 · Cited by 23
Mechanical autogenous recovery and crack sealing of natural curauá textile reinforced concrete
de Souza, L. M. S., de Souza, L. M. S., & Silva, F. D. A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117476 · Cited by 23
Nanotechnology in Pulp and Paper Industries: A Review
Mohieldin, S. D., Zainudin, E. S., Tahir, P. M., & Ainun, Z. M. A. (2011) · Key engineering materials · doi:10.4028/www.scientific.net/kem.471-472.251 · Cited by 22
Bertolla, L., Dlouhý, I., & Boccaccini, A. R. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.04.003 · Cited by 23
Vanhatalo, K. M., Lundin, T., Koskimäki, A., Lillandt, M., & Dahl, O. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9907-6 · Cited by 23
“[4] Zimmermann T, Pöhler E, Geiger T (2004) Cellulose fibrils”
BackgroundKhattab, M. M., Hady, N. A. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00021-8 · Cited by 24
Varanasi, S., & Batchelor, W. J. (2014) · Cellulose · doi:10.1007/s10570-014-0370-8 · Cited by 22
“formed either by vacuum filtration or casting, with vacuum filtration being the faster (Zimmermann et al. 2004).”
BackgroundOriented polyvinyl alcohol films using short cellulose nanofibrils as a reinforcement
Peng, J., Ellingham, T., Sabo, R. C., Clemons, C. M., & Turng, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42283 · Cited by 22
Reinforcing potential of nanofibrillated cellulose from nonwoody plants
Chaker, A., Mutjé, P., Vilaseca, F., & Boufi, S. (2013) · Polymer Composites · doi:10.1002/pc.22607 · Cited by 22
Clemons, C. C., Sedlmair, J., Illman, B. L., Ibach, R. E., & Hirschmugl, C. J. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.016 · Cited by 21
Chutimasakul, T., Uetake, Y., Tantirungrotechai, J., Asoh, T., Uyama, H., & Sakurai, H. (2020) · ACS Omega · doi:10.1021/acsomega.0c04894 · Cited by 21
Flax nanofibrils production via supercritical carbon dioxide pre‐treatment and enzymatic hydrolysis
Nlandu, H., Belkacemi, K., Chorfa, N., Elkoun, S., Robert, M., & Hamoudi, S. (2019) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23596 · Cited by 20
Cellulose‐Nanofiber‐Based Materials
Nakagaito, A. N., & Yano, H. (2014) · Wiley eBooks · doi:10.1002/9783527649440.ch1 · Cited by 20
Fluting medium strengthened by periodate–chlorite oxidized nanofibrillated celluloses
Hietala, M., Ämmälä, A. Ä., Silvennoinen, J., & Liimatainen, H. (2015) · Cellulose · doi:10.1007/s10570-015-0801-1 · Cited by 20
Preparation and properties of sisal microfibril/gelatin biomass composites
Zheng, X., Liu, J., Pei, Y., Li, J., & Tang, K. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.024 · Cited by 20
Application of thermophilic enzymes and water jet system to cassava pulp
Chaikaew, S., Maeno, Y., Visessanguan, W., Ogura, K., Sugino, G., Lee, S. H., & Ishikawa, K. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.09.020 · Cited by 20
Cellulose fibrillation and interaction with psyllium seed husk heteroxylan
Ren, Y., Linter, B. R., & Foster, T. J. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105725 · Cited by 19
Cellulose Based Blends, Composites and Nanocomposites
Torres, F. G., Troncoso, O. P., Torres, C., & Grande, C. J. (2012) · Advanced structured materials · doi:10.1007/978-3-642-20940-6_2 · Cited by 19
Rudie, A. W. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch23 · Cited by 19
Mahmud, S., Yu, L., Yang, Y., Huang, J., Zhang, R., & Zhu, J. (2019) · Polymer Science Series A · doi:10.1134/s0965545x2001006x · Cited by 19
Cellulose nanoparticles as reinforcement in polymer nanocomposites
Ramires, E. C., & Dufresne, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.1.131 · Cited by 19
Multi-scale assembly and structure-process-property relationships in nanocellulosic materials
Jamal, M., Benkaddour, A., Pal, L., Sehaqui, H., Lucia, L. A., Eichhorn, S. J., & Habibi, Y. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101430 · Cited by 18
Bertolla, L., Dlouhý, I., Philippart, A., & Boccaccini, A. R. (2014) · Materials Letters · doi:10.1016/j.matlet.2013.12.079 · Cited by 18
Turku, I., & Kärki, T. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413496574 · Cited by 18
“Zimmermann et al.(10) report that MFC-reinforced polyvinyl alcohol and hydroxypropyl cellulose had three times higher tensile modulus and five times higher tensile strength compared to untreated polymers.”
BackgroundBulota, M., Jääskeläinen, A., Paltakari, J., & Hughes, M. (2011) · Journal of Materials Science · doi:10.1007/s10853-010-5227-4 · Cited by 18
Mechanics of natural curauá textile-reinforced concrete
de Souza, L. O., Silva, F. D. A., & Silva, F. D. A. (2019) · Magazine of Concrete Research · doi:10.1680/jmacr.18.00473 · Cited by 18
Formation of cellulose microspheres and nanocrystals from mildly carboxylated fibers
Moradian, M., & van de Ven, T. G. M. (2022) · Cellulose · doi:10.1007/s10570-022-04486-w · Cited by 18
Structure and Properties of Cellulose Nanofibrils
Huang, P., Wang, C., Huang, Y., & Wu, M. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch3 · Cited by 18
Wu, Y., Ding-guo, Z., Wang, S., & Zhang, Y. (2009) · BioResources · doi:10.15376/biores.4.4.1487-1497 · Cited by 18
“Therefore it can partly take the place of glass fiber, carbon fiber, and other man-made fibers as the filler to compound biodegradable nancomposites (Cheng et al. 2007; Zimmermann et al. 2004).”
BackgroundBanana Fibers as a Sustainable Acoustic Absorbing Materials: A Review
Chattaviriya, P., Supawantanakul, D., Sangsirimongkolying, R., & Sua-iam, G. (2022) · Trends in Sciences · doi:10.48048/tis.2022.4498 · Cited by 17
“Figure 4 The arrangement of micron-sized fibers and cellulose in the cell wall of plant fibers [26].”
BackgroundInfluentialResearch progress of absorbable stents
Song, Y., Li, B., Chen, H., & Yu, Z. (2023) · International Journal of Medical Sciences · doi:10.7150/ijms.90012 · Cited by 17
“Biodegradable, nontoxic lignocellulosic fibres from renewable resources such as wood have been studied as potential augments for biodegradable polymers because of their high strength and more economical performance than traditional synthetic fibers [70-73].”
BackgroundMechanical performance of cellulose nanofibril film-wood flake laminate
Liu, J.-C., Moon, R. J., Rudie, A. W., & Youngblood, J. P. (2013) · Holzforschung · doi:10.1515/hf-2013-0071 · Cited by 17
Wheat Gluten Aggregates as a Reinforcement for Poly(vinyl alcohol) Films
DeButts, B. L., Spivey, C. R., & Barone, J. R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03872 · Cited by 17
Ponni, P., Subramanian, K. S., Janavi, G. J., & Subramanian, J. (2020) · BioResources · doi:10.15376/biores.15.2.2882-2905 · Cited by 17
“In another study, Zimmermann et al. (2004) developed a nano-film by reinforcing polyvinyl alcohol with hydroxypropyl cellulose, and the resultant film showed a three-fold increase in Young's modulus and five-fold increase in tensile strength compared to the base materials.”
ResultNanofibrillar cellulose in drug delivery
Kolakovic, R. (2013) · Helda - University of Helsinki Institutional Repository · Cited by 17
Zheng, H. (2014) · Aaltodoc (Aalto University) · Cited by 17
Lignocellulosic biomass-based materials: a promising resource for viable energy storage
Islam, M. M. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00038b · Cited by 16
Grafting from cellulose nanofibres with naturally-derived oil to reduce water absorption
Kępa, K., Amiralian, N., Martin, D. J., & Grøndahl, L. (2021) · Polymer · doi:10.1016/j.polymer.2021.123659 · Cited by 16
Mechanical Properties of Eco-friendly Polymer Nanocomposites
Shahzad, A. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_18 · Cited by 16
Morphological investigation of polylactide/microfibrillated cellulose composites
Plummer, C. J. G., Choo, C. K. C., Boissard, C. I. R., Bourban, P. ‐., & Månson, J. E. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-2968-z · Cited by 16
“This may be attributed to both a decrease in the strength of reactions between the MFC fibers and improved chemical affinity between the MFC and the PLA matrix [11, 17].”
BackgroundKim, W., Park, E., & Jeon, S. (2020) · Sensors · doi:10.3390/s20020437 · Cited by 16
Khadraoui, M., Khiari, R., Brosse, N., Bergaoui, L., & Mauret, É. (2022) · BioResources · doi:10.15376/biores.17.2.2933-2958 · Cited by 16
“…date palm tree (Benhamou et al. 2014), alfa (Marrakchi et al. 2011), corn cobs and husk (Shogren et al. 2011), sugar beet pulp (Habibi and Vignon 2008; Li et al. 2014), banana rachis and culinary banana peel (Zuluaga et al. 2009; Khawas and Deka 2016), and Posidonia oceanica (Bettaieb et al. 2015).”
BackgroundA Novel Nano Cellulose Preparation Method and Size Fraction by Cross Flow Ultra- Filtration
Zhu, H., Helander, M., Moser, C., Ståhlkranz, A., Söderberg, D., Henriksson, G., & Lindström, M. E. (2012) · Current Organic Chemistry · doi:10.2174/138527212802651197 · Cited by 16
“[13] reported the use of microfluidizer for microfibrillation of sulphite pulp.”
MethodInjection Molded of Bio-Micro-Composites from Natural Fibers and Polylactic Acid
Subyakto, S., Hermiati, E., Masruchin, N., Ismadi, I., Prasetiyo, K. W., Kusumaningrum, W. B., & Subiyanto, B. (2017) · Wood Research Journal · doi:10.51850/wrj.2011.2.1.21-26 · Cited by 16
Cellulose nanofibers for the production of bionanocomposites
Nechyporchuk, O. (2015) · theses.fr (ABES) · doi:10.70675/231cbf04z21a4z4e71z9e67z630faacd27da · Cited by 16
Assekouri, A., Bouragba, F. Z., Lahkale, R., Mortadi, H., & Sabbar, E. M. (2022) · Journal of Composite Materials · doi:10.1177/00219983221109330 · Cited by 15
“A similar increase in Young’s modulus was reported by Zimmermann et al.54,55 for cellulose fibrils isolated from sulfite paste reinforced PVA composites.”
BackgroundCementitious Composites Reinforced with Natural Fibres
Ferrara, L., Ferreira, S. R., Krelani, V., Lima, P. R. L., Silva, F. D. A., & Filho, R. D. T. (2017) · Research for development · doi:10.1007/978-3-319-56797-6_9 · Cited by 15
The mechanics of biocomposites
Das, O., Kim, N. K., & Bhattacharyya, D. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00017-2 · Cited by 15
Wakabayashi, K., Vancoillie, S. H. E., Assfaw, M. G., Choi, D. H., Desplentere, F., & Vuure, A. W. V. (2018) · Polymer Composites · doi:10.1002/pc.25184 · Cited by 15
Nanocelluloses: Emerging Building Blocks for Renewable Materials
Habibi, Y., & Lucia, L. A. (2012) · Wiley eBooks · doi:10.1002/9781118229484.ch3 · Cited by 15
Mai, X., Zhang, X., Tang, M., Zheng, Y., Wang, D., Xu, W., Liu, F., & Sun, Z. (2023) · Food Science and Biotechnology · doi:10.1007/s10068-023-01437-4 · Cited by 14
“The composite of MFC and other materials can effectively enhance the mechanical properties of the whole material (Chen et al., 2021; Zimmermann et al., 2004).”
Environmental Properties and Applications of Cellulose and Chitin-Based Bionanocomposites
Zhang, R., & Xu, H. (2022) · Advanced structured materials · doi:10.1007/978-3-031-13343-5_4 · Cited by 14
Nanocellulose in Paper and Board Coating
Tozluoğlu, A., Ateş, S., Durmaz, E., Sertkaya, S., Arslan, R., Ozcelik, O., & Candan, Z. (2022) · Springer eBooks · doi:10.1007/978-3-031-17378-3_8 · Cited by 14
Cellulose‐Based Liquid Crystalline Composite Systems
Borges, J. P., Canejo, J. P., Fernandes, S. N., Brogueira, P., & Godinho, M. H. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch8 · Cited by 14
Structural characteristics of nanofibrillated cellulose mats: Effect of preparation conditions
Sim, K., Ryu, J.-H., & Youn, H. J. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-0294-4 · Cited by 14
Experiences with Scaling-Up Production of TEMPO-Grade Cellulose Nanofibrils
Reiner, R. S., & Rudie, A. W. (2017) · ACS symposium series · doi:10.1021/bk-2017-1251.ch012 · Cited by 14
Fractional study of the microfibrillated cellulose
LAITINEN, O., & Niinimäki, J. (2014) · TAPPI Journal · doi:10.32964/tj13.7.49 · Cited by 14
Myllytie, P. (2009) · Aaltodoc (Aalto University) · Cited by 14
3D Printed Biodegradable Soft Actuators from Nanocellulose Reinforced Gelatin Composites
Müller, O., Poulin, A., Aeby, X., Emma, R., Kanno, R., Nagai, T., Shintake, J., & Nyström, G. (2024) · Advanced Sustainable Systems · doi:10.1002/adsu.202400450 · Cited by 13
Advanced Characterization of Self-Fibrillating Cellulose Fibers and Their Use in Tunable Filters
Görür, Y. C., Reid, M. S., Montanari, C., Larsson, P. T., Larsson, P. A., & Wågberg, L. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06452 · Cited by 13
Metadata
- Authors
- Zimmermann, T., Pöhler, E., & Geiger, T.
- Affiliations
- Empa (CH)
- Corresponding author
- Zimmermann, T.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2004-09
- Volume
- 6
- Issue
- 9
- Pages
- 754-761
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1967479815
- Cited by
- 598
- References
- 21
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 20 · 2023: 17 · 2022: 33 · 2021: 30 · 2020: 41 · 2019: 37 · 2018: 28 · 2017: 44 · 2016: 42 · 2015: 39 · 2014: 51 · 2013: 38 · 2012: 46
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- cellulose fibrils, polymer reinforcement, wood cell wall, specific tensile strength, sulfite pulp, nanofibrils, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.