The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Abstract
Titanium materials are ideal targets for selective laser melting (SLM), because they are expensive and difficult to machinery using traditional technologies. After briefly introducing the SLM process and processing factors involved, this paper reviews the recent progresses in SLM of titanium alloys and their composites for biomedical applications, especially developing new titanium powder for SLM. Although the current feedstock titanium powder for SLM is limited to CP‐Ti, Ti–6Al–4V, and Ti–6Al–7Nb, this review extends attractive progresses in the SLM of all types of titanium, composites, and porous structures including Ti–24Nb–4Zr–8Sn and Ti–TiB/TiC composites with focus on the manufacture by SLM and resulting unique microstructure and properties (mechanical, wear/corrosion resistance properties).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationLi, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Self-citationParametric analysis of the selective laser melting process
Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.02.088 · Cited by 650
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationAttar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationDuctility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Tolosa, I., Garciandía, F., Zubiri, F., Zapirain, F., & Esnaola, A. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2631-5 · Cited by 487
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Closed loop direct metal deposition: art to part
Mazumder, J., Dutta, D., Kikuchi, N., & Ghosh, A. (2000) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(00)00072-5 · Cited by 452
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Pattanayak, D. K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., Nishida, N., Nakamura, T., & Kokubo, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.034 · Cited by 384
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Ryan, G. E., Pandit, A. S., & Apatsidis, D. P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.032 · Cited by 340
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Warnke, P. H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S. T., Springer, I. N., Wiltfang, J., & Sivananthan, S. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0288 · Cited by 305
Balling processes during selective laser treatment of powders
Tolochko, N. K., Mozzharov, S. E., Yadroitsev, I. A., Laoui, T., Froyen, L., Titov, V. I., & Ignatiev, M. B. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410526953 · Cited by 299
Additive manufacturing of Cu–10Sn bronze
Scudino, S., Unterdörfer, C., Prashanth, K. G., Attar, H., Ellendt, N., Uhlenwinkel, V., & Eckert, J. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.05.076 · Cited by 284
Self-citationThe effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Self-citationNet shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
Gu, D., Hagedorn, Y.-C., Meiners, W., Wissenbach, K., & Poprawe, R. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.010 · Cited by 256
Zhong, M., Sun, H., Liu, W., Zhu, X., & He, J. (2005) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.03.047 · Cited by 244
Laser processing of SiC-particle-reinforced coating on titanium
Das, M., Balla, V. K., Basu, D., Bose, S., & Bandyopadhyay, A. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.04.044 · Cited by 233
In vitro bioactivity of a biocomposite fabricated from HA and Ti powders by powder metallurgy method
Ning, C. Q., & Zhou, Y. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00419-7 · Cited by 229
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
Yadroitsev, I., Shishkovsky, I., Bertrand, P., & Smurov, I. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.07.154 · Cited by 206
Lin, C., Wirtz, T., LaMarca, F., & Hollister, S. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31231 · Cited by 198
Laser-Induced Materials and Processes for Rapid Prototyping
Lü, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5 · Cited by 188
Development and mechanical characterization of porous titanium bone substitutes
Barbas, A., Bonnet, A.-S., Lipinski, P., Pesci, R., & Dubois, G. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.01.008 · Cited by 180
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Prashanth, K. G., Shahabi, H. S., Attar, H., et al. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.01.001 · Cited by 174
Self-citationFurther studies in selective laser melting of stainless and tool steel powders
Badrossamay, M., & Childs, T. H. C. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.09.013 · Cited by 174
Boegelein, T., Dryepondt, S. N., Pandey, A., Dawson, K., & Tatlock, G. J. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.047 · Cited by 172
High specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 169
Self-citationMechanical properties of a Ti6Al4V porous structure produced by selective laser melting
Sun, J., Yang, Y., & Wang, D. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.01.038 · Cited by 163
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Self-citationChallis, V. J., Roberts, A. P., Grotowski, J. F., Zhang, L., & Sercombe, T. B. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000154 · Cited by 134
Self-citationLiu, L. H., Yang, C. Q., Wang, F., Qu, S., Li, X., Zhang, W., Li, Y., & Zhang, L. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.04.032 · Cited by 99
Self-citationExperimental investigation of nanosecond pulsed Nd:YAG laser re‐melted pre‐placed powder beds
Morgan, R., Sutcliffe, C. J., & O’Neill, W. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395565 · Cited by 92
Zhang, L., Xu, J. Z., & Eckert, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2234535 · Cited by 78
Self-citationSpeirs, M., Humbeeck, J. V., Schrooten, J., Luyten, J., & Kruth, J. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.016 · Cited by 44
Fabrication and mechanical characterization of 3D woven Cu lattice materials
Zhang, Y., Ha, S., Sharp, K. W., Guest, J. K., Weihs, T. P., & Hemker, K. J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.131 · Cited by 34
Cited by
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationGorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
“Fringe projection was proposed also by Zhang and Attar (2015).”
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Huang, K., Marthinsen, K., Zhao, Q., & Logé, R. E. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.004 · Cited by 788
Metadata
- Authors
- Zhang, L., & Attar, H.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2015-10-06
- Volume
- 18
- Issue
- 4
- Pages
- 463-475
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1910044559
- Cited by
- 721
- References
- 60
- FWCI
- 52.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.