The DOI matches its Crossref record; 175 of the 175 references it cites were found in a registry or an index.
Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests
Abstract
Thanks to a considerable number of fascinating properties, titanium (Ti) and Ti alloys play important roles in a variety of industrial sectors. However, Ti and Ti alloys could not satisfy all industrial requirements; the degradation of Ti and Ti alloys always commences on their surfaces in service, which declines the performances of Ti workpieces. Therefore, with aim to further improve their mechanical, corrosion and biological properties, surface modification is often required for Ti and Ti alloys. This article reviews the technologies and recent developments of surface‐modification methods with respect to Ti and Ti alloys, including mechanical, physical, chemical, and biochemical technologies. Conventional methods have limited improvement in the properties and/or restriction on the geometry of workpieces. Therefore, many advanced surface‐modification technologies have emerged in recent decades. New methods make Ti and Ti alloys have better performance and extended applications. With requirement of high surface properties in future. Understanding the mechanism in various surface‐modification methods, combining the advantages of current technologies and developing new coating materials with high performance are required urgently. As such, incorporation of different surface‐modification technologies with high‐performance modified layers may be the mainstream of surface modifications for Ti and Ti alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Physical metallurgy of Ti–Ni-based shape memory alloys
Otsuka, K., & Ren, X. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2004.10.001 · Cited by 4,610
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Osteoblast adhesion on biomaterials
Anselme, K. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00242-2 · Cited by 2,500
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Plasma-surface modification of biomaterials
Chu, P. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00004-9 · Cited by 1,578
Navarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
Plasma sprayed coatings of hydroxylapatite
De Groot, K., Geesink, R., Klein, C. P. A. T., & Serekian, P. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211203 · Cited by 1,156
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationNew Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Preparation of bioactive Ti and its alloys via simple chemical surface treatment
Kim, H.-M., Miyaji, F., Kokubo, T., & Nakamura, T. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199611)32:3<409::aid-jbm14>3.0.co;2-b · Cited by 1,005
Titanium alloys for aerospace applications
Peters, M., Kumpfert, J., Ward, C. H., & Leyens, C. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310095 · Cited by 894
Comparison of metal release from various metallic biomaterials in vitro
Okazaki, Y., & Gotoh, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.005 · Cited by 862
Application of ionic liquids to the electrodeposition of metals
Abbott, A. P., & McKenzie, K. J. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b607329h · Cited by 817
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings
Musil, J., Kunc, F., Zeman, H., & Poláková, H. (2002) · Surface and Coatings Technology · doi:10.1016/s0257-8972(01)01714-5 · Cited by 801
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationBiocompatibility of Advanced Manufactured Titanium Implants—A Review
Sidambe, A. (2014) · Materials · doi:10.3390/ma7128168 · Cited by 741
Preparation of bioactive titanium metal via anodic oxidation treatment
Yang, B., Uchida, M., Kim, H.-M., Zhang, X., & Kokubo, T. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00626-4 · Cited by 730
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationSignificance of calcium phosphate coatings for the enhancement of new bone osteogenesis – A review
Surmenev, R. A., Surmeneva, M. A., & Ivanova, A. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.036 · Cited by 712
Improved biological performance of Ti implants due to surface modification by micro-arc oxidation
Li, L.-H., Kong, Y.-M., Kim, H.-W., Kim, Y.-W., Kim, H.-E., Heo, S.-J., & Koak, J.-Y. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.048 · Cited by 676
Metal-matrix composites for space applications
Rawal, S. P. (2001) · JOM · doi:10.1007/s11837-001-0139-z · Cited by 639
Aging of bone tissue: mechanical properties.
Burstein, A. H., Reilly, D. T., & Martens, M. A. (1976) · PubMed · Cited by 614
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationLiu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationPorous NiTi for bone implants: A review
Bansiddhi, A., Sargeant, T. D., Stupp, S. I., & Dunand, D. C. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.02.009 · Cited by 572
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationAging of bone tissue: mechanical properties
Burstein, A., Reilly, D., & Martens, M. (1976) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197658010-00015 · Cited by 569
Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications
Gurrappa, I. (2003) · Materials Characterization · doi:10.1016/j.matchar.2003.10.006 · Cited by 512
Biomedical applications of diamond-like carbon (DLC) coatings: A review
Dearnaley, G., & Arps, J. H. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.07.077 · Cited by 502
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationBiomimetic apatite formation on chemically treated titanium
Jonášová, L., Müller, F. A., Helebrant, A., Strnad, J., & Greil, P. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.009 · Cited by 474
Nie, X., Leyland, A., & Matthews, A. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00612-x · Cited by 406
Jin, G., Qin, H., Cao, H., Qian, S., Zhao, Y., Peng, X., Zhang, X., Liu, X., & Chu, P. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.074 · Cited by 406
Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method
Kim, H.-W., Koh, Y.-H., Li, L.-H., Lee, S., & Kim, H.-E. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.041 · Cited by 404
Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al
Duerig, T. W., Albrecht, J., Richter, D., & Fischer, P. (1982) · Acta Metallurgica · doi:10.1016/0001-6160(82)90137-7 · Cited by 392
Physico-chemical considerations of titanium as a biomaterial
Tengvall, P., & Lundström, I. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90056-y · Cited by 373
Formation and characterization of anodic titanium oxide films containing Ca and P
Ishizawa, H., & Ogino, M. (1995) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820290110 · Cited by 368
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationGradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Self-citationStructure and composition of passive titanium oxide films
Pouilleau, J., Devilliers, D., Garrido, F., Durand-Vidal, S., & Mahé, É. (1997) · Materials Science and Engineering B · doi:10.1016/s0921-5107(97)00043-3 · Cited by 346
Biological actions of silver nanoparticles embedded in titanium controlled by micro-galvanic effects
Cao, H., Liu, X., Meng, F., & Chu, P. K. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.066 · Cited by 344
Kazemzadeh-Narbat, M., Kindrachuk, J., Duan, K., Jenssen, H., Hancock, R. E. W., & Wang, R. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.035 · Cited by 343
Ion implantation of titanium based biomaterials
Rautray, T. R., Narayanan, R., & Kim, K. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.002 · Cited by 343
A study on the mechanism of protein adsorption to TiO2
Ellingsen, J. E. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90057-h · Cited by 335
Sittig, C., Textor, M., Spencer, N. D., Wieland, M., & Vallotton, P. H. (1999) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008840026907 · Cited by 332
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Brandl, E., Schoberth, A., & Leyens, C. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.095 · Cited by 327
A Review on High‐Strength Titanium Alloys: Microstructure, Strengthening, and Properties
Kang, L., & Yang, C. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801359 · Cited by 318
Titanium alloys for marine application
Gorynin, I. V. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)01180-0 · Cited by 316
Zhang, L.-C., Jia, Z., Lyu, F., Liang, S.-X., & Lu, J. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100576 · Cited by 312
Self-citationAdditively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Covalent Attachment of Cell-Adhesive, (Arg-Gly-Asp)-Containing Peptides to Titanium Surfaces
Xiao, S.-J., Textor, M., Spencer, N. D., & Sigrist, H. (1998) · Langmuir · doi:10.1021/la980257z · Cited by 295
The effect of heat treatment on bone-bonding ability of alkali-treated titanium
Nishiguchi, S., Nakamura, T., Kobayashi, M., Kim, H.-M., Miyaji, F., & Kokubo, T. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)90203-4 · Cited by 292
Dehnavi, V., Luan, B. L., Shoesmith, D. W., Liu, X. Y., & Rohani, S. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.03.041 · Cited by 290
Plasma treatments and plasma deposition of polymers for biomedical applications
Favia, P., & d’Agostino, R. (1998) · Surface and Coatings Technology · doi:10.1016/s0257-8972(97)00285-5 · Cited by 288
Jones, M. I., McColl, I. R., Grant, D. M., Parker, K. G., & Parker, T. L. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200011)52:2<413::aid-jbm23>3.0.co;2-u · Cited by 288
Antimicrobial titanium/silver PVD coatings on titanium
Ewald, A., Glückermann, S. K., Thull, R., & Gbureck, U. (2006) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-5-22 · Cited by 281
Porous Titanium Implants: A Review
Pałka, K., & Pokrowiecki, R. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700648 · Cited by 279
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Self-citationProperties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Tengvall, P., Lundström, I., Sjöqvist, L., Elwing, H., & Bjursten, L. M. (1989) · Biomaterials · doi:10.1016/0142-9612(89)90019-7 · Cited by 267
Corrosion resistance tests on NiTi shape memory alloy
Rondelli, G. (1996) · Biomaterials · doi:10.1016/0142-9612(95)00352-5 · Cited by 266
Orgéas, L., & Favier, D. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00167-0 · Cited by 261
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Thermal spraying of biomaterials
Heimann, R. B. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.04.052 · Cited by 248
Stewart, C., Akhavan, B., Wise, S. G., & Bilek, M. M. M. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100588 · Cited by 240
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Self-citationFluor-hydroxyapatite sol–gel coating on titanium substrate for hard tissue implants
Kim, H., Kim, H., Kim, H., Kim, H., & Knowles, J. C. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.104 · Cited by 238
Incorporation of tobramycin into biomimetic hydroxyapatite coating on titanium
Stigter, M., de Groot, K., & Layrolle, P. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00157-6 · Cited by 237
Kirmanidou, Y., Sidira, M., Drosou, M.-E., Bennani, V., Bakopoulou, A., Tsouknidas, A., Michailidis, N., & Michalakis, K. (2016) · BioMed Research International · doi:10.1155/2016/2908570 · Cited by 231
Lamolle, S. F., Monjo, M., Rubert, M., Haugen, H. J., Lyngstadaas, S. P., & Ellingsen, J. E. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.052 · Cited by 227
Anodic oxide films containing Ca and P of titanium biomaterial
Zhu, X., Kim, K.-H., & Jeong, Y. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00394-x · Cited by 224
Ultrahigh-performance TiNi shape memory alloy by 4D printing
Lu, H. Z., Yang, C. Q., Luo, X., Ma, H. W., Song, B., Li, Y., & Zhang, L. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138166 · Cited by 222
Self-citationXIAO, S. J., TEXTOR, M., SPENCER, N. D., WIELAND, M., KELLER, B., & SIGRIST, H. (1997) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1018501804943 · Cited by 216
Fonseca, C., & Barbosa, M. A. (2001) · Corrosion Science · doi:10.1016/s0010-938x(00)00107-4 · Cited by 216
Finke, B., Luethen, F., Schroeder, K., Mueller, P. D., Bergemann, C., Frant, M., Ohl, A., & Nebe, B. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.028 · Cited by 215
McGregor, D. B., Baan, R. A., Partensky, C., Rice, J. M., & Wilbourn, J. D. (2000) · European Journal of Cancer · doi:10.1016/s0959-8049(99)00312-3 · Cited by 215
Guo, J., Padilla, R. J., Ambrose, W., De Kok, I. J., & Cooper, L. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.032 · Cited by 212
Tosatti, S., Paul, S. M. D., Askendal, A., VandeVondele, S., Hubbell, J. A., Tengvall, P., & Textor, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00420-4 · Cited by 211
Surface modification of titanium by etching in concentrated sulfuric acid
Ban, S., Iwaya, Y., Kono, H., & Sato, H. (2006) · Dental Materials · doi:10.1016/j.dental.2005.09.007 · Cited by 208
Wang, J. C., Liu, Y. J., Qin, P., Liang, S. X., Sercombe, T. B., & Zhang, L. C. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.06.001 · Cited by 208
Self-citationCorrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Self-citationStudy of diopside ceramics for biomaterials
Nonami, T., & Tsutsumi, S. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008996908797 · Cited by 202
Zheng, Y. F., Zhang, B. B., Wang, B. L., Wang, Y. B., Li, L., Yang, Q. B., & Cui, L. S. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.010 · Cited by 197
Liu, D., Chen, X., Hu, Y., Sun, T., Song, Z., Zheng, Y., Cao, Y., Cai, Z., Cao, M., Peng, L., et al. (2018) · Nature Communications · doi:10.1038/s41467-017-02627-5 · Cited by 195
Mechanical Properties of Dried Defatted Spongy Bone
Lindahl, O. (1976) · Acta Orthopaedica Scandinavica · doi:10.3109/17453677608998966 · Cited by 194
Compelling Rejuvenated Catalytic Performance in Metallic Glasses
Liang, S., Jia, Z., Liu, Y., Zhang, W., Wang, W., Lü, J., & Zhang, L. (2018) · Advanced Materials · doi:10.1002/adma.201802764 · Cited by 194
Self-citationSchwarzschild Black Holes from Matrix Theory
Banks, T., Fischler, W., Klebanov, I. R., & Susskind, L. (1998) · Physical Review Letters · doi:10.1103/physrevlett.80.226 · Cited by 186
Titanium in the family automobile: The cost challenge
Froes, F. H., Friedrich, H., Kiese, J., & Bergoint, D. (2004) · JOM · doi:10.1007/s11837-004-0144-0 · Cited by 183
Lopez-Heredia, M. A., Sohier, J., Gaillard, C., Quillard, S., Dorget, M., & Layrolle, P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.021 · Cited by 182
Surface modification of medical metals by ion implantation of silver and copper
Wan, Y. Z., Raman, S., He, F., & Huang, Y. (2007) · Vacuum · doi:10.1016/j.vacuum.2006.12.011 · Cited by 179
Surface energy characterization of unalloyed titanium implants
Kilpadi, D. V., & Lemons, J. E. (1994) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820281206 · Cited by 177
Liu, W., Liu, S., & Wang, L. (2019) · Coatings · doi:10.3390/coatings9040249 · Cited by 177
Self-citationPan, J., Liao, H., Leygraf, C., Thierry, D., & Li, J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199805)40:2<244::aid-jbm9>3.0.co;2-l · Cited by 174
Finely grained nanometric and submicrometric coatings by thermal spraying: A review
Pawłowski, L. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.04.004 · Cited by 169
Design-of-experiments application in machining titanium alloys for aerospace structural components
Khanna, N., & Davim, J. P. (2014) · Measurement · doi:10.1016/j.measurement.2014.10.059 · Cited by 165
Sathasivam, S., Bhachu, D. S., Lu, Y., Chadwick, N., Althabaiti, S. A., Alyoubi, A. O., Basahel, S. N., Carmalt, C. J., & Parkin, I. P. (2015) · Scientific Reports · doi:10.1038/srep10952 · Cited by 163
The removal torque of titanium screw inserted in rabbit tibia treated by dual acid etching
Cho, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00218-7 · Cited by 161
Haemocompatibility of DLC and TiC–TiN interlayers on titanium
Jones, M. I., McColl, I. R., Grant, D. M., Parker, K. G., & Parker, T. L. (1999) · Diamond and Related Materials · doi:10.1016/s0925-9635(98)00426-9 · Cited by 158
Bioactivity of plasma sprayed dicalcium silicate coatings
Liu, X., Tao, S., & Ding, C. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00210-1 · Cited by 155
Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid
Wang, X.-X., Wei, Y., Hayakawa, S., et al. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00357-0 · Cited by 152
Singh, H., Sidhu, B. S., Puri, D., & Prakash, S. (2007) · Materials and Corrosion · doi:10.1002/maco.200603985 · Cited by 143
In vitro study of manganese-doped bioactive glasses for bone regeneration
Miola, M., Vitale‐Brovarone, C., Maina, G., Rossi, F., Bergandi, L., Ghigo, D., Saracino, S., Maggiora, M., Canuto, R. A., Muzio, G., et al. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.01.045 · Cited by 142
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Self-citationFukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Yamaguchi, S., Kizuki, T., Matsushita, T., Niinomi, M., Kokubo, T., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.026 · Cited by 134
Carbon plasma immersion ion implantation of nickel–titanium shape memory alloys
Poon, R. W. Y., Yeung, K., Liu, X. Y., et al. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.056 · Cited by 134
Yu, B., Qi, F., Chen, Y., Wang, X., Zheng, B., Zhang, W., Li, Y., & Zhang, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09108 · Cited by 128
Self-citationImproved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Qin, P., Liu, Y., Sercombe, T. B., Li, Y., Zhang, C., Cao, C., Sun, H., & Zhang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00319 · Cited by 128
Self-citationDing, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00315-6 · Cited by 127
Martin, L. J., Akhavan, B., & Bilek, M. (2018) · Nature Communications · doi:10.1038/s41467-017-02545-6 · Cited by 120
Fabrication of novel TiZr alloy foams for biomedical applications
Wen, C., Yamada, Y., & Hodgson, P. D. (2005) · Materials Science and Engineering C · doi:10.1016/j.msec.2005.08.006 · Cited by 110
Hafeez, N., Liu, S., Lu, E., Wang, L., Liu, R., Lü, W., & Zhang, L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.138 · Cited by 109
Self-citationSul, Y., Johansson, C. B., Kang, Y.-M., Jeon, D., & Albrektsson, T. O. (2002) · Clinical Implant Dentistry and Related Research · doi:10.1111/j.1708-8208.2002.tb00156.x · Cited by 107
Biomimetic calcium phosphate coatings on nitric-acid-treated titanium surfaces
Lu, X., Zhao, Z., & Leng, Y. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.06.030 · Cited by 106
Tian, Y., Chen, C. Z., Chen, L. X., & Huo, Q. (2005) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.11.011 · Cited by 100
Self-citationLiu, L. H., Yang, C. Q., Wang, F., Qu, S., Li, X., Zhang, W., Li, Y., & Zhang, L. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.04.032 · Cited by 99
Self-citationThermodynamic Destabilization of Ti-O Solid Solution by H 2 and Deoxygenation of Ti Using Mg
Zhang, Y., Fang, Z. Z., Sun, P., Zhang, T., Xia, Y., Zhou, C., & Huang, Z. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00845 · Cited by 98
Callen, B. W., Löwenberg, B., Lugowski, S., Sodhi, R. N. S., & Davies, J. E. (1995) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820290302 · Cited by 92
Regulation of the behaviors of mesenchymal stem cells by surface nanostructured titanium
Lai, M., Cai, K., Hu, Y., Yang, X., & Liu, Q. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.04.029 · Cited by 89
High-strength silicon brass manufactured by selective laser melting
Yang, C. Q., Zhao, Y., Kang, L. M., Li, D. D., Zhang, W. W., & Zhang, L. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.09.011 · Cited by 88
Self-citationSeol, Y., Park, Y., Lee, S., Kim, K.-H., Lee, J., Kim, T., Lee, Y., Ku, Y., Rhyu, I., Han, S., et al. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30639 · Cited by 82
Comparison of titanium soaked in 5M NaOH or 5M KOH solutions
Kim, C., Kendall, M. R., Miller, M. A., Long, C. L., Larson, P. R., Humphrey, M. B., Madden, A. S. E., & Taş, A. C. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.08.047 · Cited by 81
Zhang, L., Xu, J. Z., & Eckert, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2234535 · Cited by 78
Self-citationZhang, C., Ding, Z., Xie, L., Zhang, L., Wu, L., Fu, Y., Wang, L., & Lü, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.06.141 · Cited by 77
Self-citationSverzut, A. T., Crippa, G. E., Morra, M., de Oliveira, P. T., Beloti, M. M., & Rosa, A. L. (2012) · Biomedical Materials · doi:10.1088/1748-6041/7/3/035007 · Cited by 74
Zhu, C., Lv, Y., Qian, C., Qian, H., Jiao, T., Wang, L., & Zhang, F. (2016) · Scientific Reports · doi:10.1038/srep38875 · Cited by 71
Self-citationMorphology of apatite formed on surface of wollastonite coating soaked in simulate body fluid
Liu, X., & Ding, C. (2002) · Materials Letters · doi:10.1016/s0167-577x(02)00848-0 · Cited by 69
Catauro, M., Bollino, F., Papale, F., Ferrara, C., & Mustarelli, P. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.05.016 · Cited by 67
Plasma activated coatings with dual action against fungi and bacteria
Akhavan, B., Michl, T. D., Giles, C., Ho, K. K. K., Martin, L. J., Sharifahmadian, O., Wise, S. G., Coad, B. R., Kumar, N., Griesser, H. J., et al. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.04.003 · Cited by 67
Gu, H., Ding, Z., Yang, Z., Yu, W., Zhang, W., Lü, W., Zhang, L., Wang, K., Wang, L., & Fu, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107680 · Cited by 67
Self-citationImprovement of the biomedical properties of titanium using SMAT and thermal oxidation
Wen, M. F., Wen, C., Hodgson, P. D., & Li, Y. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.10.039 · Cited by 66
Staphylococcus aureus resistance on titanium coated with multivalent PEGylated-peptides
Khoo, X., O’Toole, G. A., Nair, S. A., Snyder, B. D., Kenan, D. J., & Grinstaff, M. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.031 · Cited by 65
Amine Functionalization of Collagen Matrices with Multifunctional Polyethylene Glycol Systems
Ward, J., Kelly, J. L., Wang, W., Zeugolis, D. I., & Pandit, A. S. (2010) · Biomacromolecules · doi:10.1021/bm100898p · Cited by 64
Fe‐based Metallic Glasses in Functional Catalytic Applications
Zhang, L., & Liang, S. (2018) · Chemistry - An Asian Journal · doi:10.1002/asia.201801082 · Cited by 62
Self-citationDettin, M., Bagno, A., Gambaretto, R., Iucci, G., Conconi, M. T., Tuccitto, N., Menti, A. M., Grandi, C., Bello, C. D., Licciardello, A., et al. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32064 · Cited by 59
Wang, S., Hibino, H., Suzuki, S., & Yamamoto, H. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00252 · Cited by 59
Radical-functionalized plasma polymers: Stable biomimetic interfaces for bone implant applications
Akhavan, B., Croes, M., Wise, S. G., Zhai, C., Hung, J., Stewart, C., Ionescu, M., Weinans, H., Gan, Y., Yavari, S. A., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.07.002 · Cited by 58
Long term tissue response to titanium coated with diamond like carbon
Mohanty, M., Anilkumar, T. V., Mohanan, P. V., Muraleedharan, C. V., Bhuvaneshwar, G. S., Derangère, F., Sampeur, Y., & Suryanarayanan, R. (2002) · Biomolecular Engineering · doi:10.1016/s1389-0344(02)00026-6 · Cited by 57
Wang, L., Qu, J., Chen, L., Meng, Q., Zhang, L., Qin, J., Zhang, D., & Lü, W. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3089-8 · Cited by 56
Self-citationAmino and carboxyl plasma functionalization of collagen films for tissue engineering applications
Taraballi, F., Zanini, S., Lupo, C., Panseri, S., Cunha, C., ̃Riccardi, C., Marcacci, M., Campione, M., & Cipolla, L. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.11.041 · Cited by 53
Chai, Y. C., Truscello, S., Bael, S. V., Luyten, F. P., Vleugels, J., & Schrooten, J. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.032 · Cited by 52
Wu, L., Holloway, B. C., Beesabathina, D. P., Kalil, C. R., & Manos, D. M. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(00)00720-9 · Cited by 52
Calcium phosphate coating of Ti–Nb–Zr–Sn titanium alloy
Zheng, C., Li, S. J., Tao, X., Hao, Y., Yang, R., & Zhang, L. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.09.021 · Cited by 52
Self-citationYang, C. Q., Mo, D., Lu, H. Z., Li, X., Zhang, W. W., Fu, Z., Zhang, L., & Lavernia, E. J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.03.005 · Cited by 51
Self-citationpH dependent passivation behavior of niobium in acid fluoride-containing solutions
Guan, L., Li, Y., Wang, G., Zhang, Y., & Zhang, L. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.221 · Cited by 49
Self-citationYang, Z., Gu, H., Sha, G., Lü, W., Yu, W., Zhang, W., Fu, Y., Wang, K., & Wang, L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16343 · Cited by 49
Self-citationSun, J., Yao, Q., Zhang, Y. H., Du, X., Wu, Y., & Tong, W. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.11.095 · Cited by 48
Yamamoto, H., Shibata, Y., & Miyazaki, T. (2005) · Journal of Dental Research · doi:10.1177/154405910508400717 · Cited by 47
Hoene, A., Walschus, U., Patrzyk, M., Finke, B., Lucke, S., Nebe, B. J., Schroeder, K., Ohl, A., & Schlosser, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.003 · Cited by 46
Effect of polyhexanide and gentamycin on human osteoblasts and endothelial cells
Ince, A., Schütze, N., Hendrich, C., Jakob, F., Eulert, J., & Löhr, F. (2007) · Swiss Medical Weekly · doi:10.4414/smw.2007.11434 · Cited by 45
Cai, Y., Wang, X., Poh, C. K., Tan, H. C., Soe, M. T., Zhang, S., & Wang, W. (2014) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2013.11.004 · Cited by 44
Zheng, M., Fan, D., Li, X.-K., et al. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.09.054 · Cited by 42
Roughened titanium surfaces with silane and further RGD peptide modification in vitro
Chen, W., & Ko, C. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.02.040 · Cited by 41
Liu, Y., Lin, G., Wang, J.-Y., Cheng, C.-S., Yang, Y., Lee, B., & Tung, K. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.06.010 · Cited by 39
Xie, L., Wang, L., Wang, K., Yin, G., Fu, Y., Zhang, D., Lü, W., Hua, L., & Zhang, L. (2018) · Materialia · doi:10.1016/j.mtla.2018.08.007 · Cited by 38
Self-citationMultifunctional Protein-Immobilized Plasma Polymer Films for Orthopedic Applications
Stewart, C., Akhavan, B., Hung, J., Bao, S., Jang, J., Wise, S. G., & Bilek, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00954 · Cited by 38
Substrate-Regulated Growth of Plasma-Polymerized Films on Carbide-Forming Metals
Akhavan, B., Wise, S. G., & Bilek, M. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b02901 · Cited by 36
Mauer, G., & Vaßen, R. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.06.086 · Cited by 34
Morra, M., Cassinelli, C., Cascardo, G., Bollati, D., & y Baena, R. R. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32702 · Cited by 33
Cellular responses to radical propagation from ion-implanted plasma polymer surfaces
Stewart, C., Akhavan, B., Santos, M., Hung, J., Hawkins, C. L., Bao, S., Wise, S. G., & Bilek, M. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.06.111 · Cited by 31
Evaluation of Osseointegration of Titanium Alloyed Implants Modified by Plasma Polymerization
Gabler, C., Zietz, C., Göhler, R., Fritsche, A., Lindner, T., Haenle, M., Finke, B., Meichsner, J., Lenz, S., Frerich, B., et al. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15022454 · Cited by 28
Thin sol-gel-derived silica coatings on dental pure titanium casting
Yoshida, K., Kamada, K., Sato, K., Hatada, R., Baba, K., & Atsuta, M. (1999) · Journal of Biomedical Materials Research · Cited by 24
Degradable Biomaterials for Temporary Medical Implants
Nasution, A. K., & Hermawan, H. (2016) · Advanced structured materials · doi:10.1007/978-3-319-14845-8_6 · Cited by 21
Fabricating sports equipment components via powder metallurgy
Moxson, V. S., & Froes, F. H. (2001) · JOM · doi:10.1007/s11837-001-0147-z · Cited by 15
Hemocompatibility and anti-endothelialization of copper–titanium coating for vena cava filters
Liu, H., Zhang, D., Shen, F., Zhang, G., & Song, S. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.02.025 · Cited by 10
Liu, L. H., Yang, C. Q., Liu, Z., et al. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.01.009 · Cited by 4
Biaxially strained germanium micro-dot array by hydrogen ion implantation
Jia, P., Zhang, M., Ma, J., Dong, L., Wang, G., Chu, P. K.-H., Xue, Z., Di, Z., & Wang, X. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.07.077 · Cited by 1
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationRecent Development in Beta Titanium Alloys for Biomedical Applications
Chen, L.-Y., Cui, Y.-W., & Zhang, L.-C. (2020) · Metals · doi:10.3390/met10091139 · Cited by 330
Self-citation
Metadata
- Authors
- Zhang, L.-C., Chen, L.-Y., & Wang, L.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2020-01-09
- Volume
- 22
- Issue
- 5
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2995578288
- Cited by
- 456
- References
- 175
- FWCI
- 31.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.