Buckling‐Based Strong Dry Adhesives Via Interlocking
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
High‐aspect‐ratio shape‐memory polymer (SMP) pillar arrays are investigated as a new type of dry adhesive based on buckling and interlocking mechanism. When two identical SMP pillar arrays are engaged at 80 °C, above the glass transition temperature at a preload larger than the critical buckling threshold, the pillars are deformed and become interweaved and/or indented with each other. After cooling to room temperature, strong pull‐off forces are observed in the normal and shear directions, both of which are much larger than those from pillar‐to‐flat surface and flat‐to‐flat surface contact. From finite element anaylsis (FEA) and comparison of measured and calculated adhesion values using different contact mechanics models, it is shown that interweaved pillars are the main source that contributes to the pillar‐to‐pillar adhesion and the indented pillars set the lower limit, whereas the probability of interdigitation is very low. Further, it is found that interweaved pillars are primarily responsible for the decreased adhesion strength and increased anisotropy when the pillar spacing became larger. Finally, it is shown that the bonded pillars can be easily separated after reheating to 80 °C due to significant drop of modulus of SMPs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Mather, P. T., Luo, X., & Rousseau, I. A. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145419 · Cited by 911
Carbon nanotube-based synthetic gecko tapes
Ge, L., Sethi, S., Ci, L., Ajayan, P. M., & Dhinojwala, A. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703505104 · Cited by 441
Biologically inspired crack trapping for enhanced adhesion
Glassmaker, N. J., Jagota, A., Hui, C.-Y., Noderer, W. L., & Chaudhury, M. K. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703762104 · Cited by 258
Structural Design and Biomechanics of Friction-Based Releasable Attachment Devices in Insects
Gorb, S. N. (2002) · Integrative and Comparative Biology · doi:10.1093/icb/42.6.1127 · Cited by 200
Research works printed but not linked: 50
- 10.1557/mrs2007.79 · DOI
- 10.1073/pnas.0506328102 · DOI · Paper page
- 10.1038/35015073 · DOI · Paper page
- 10.1073/pnas.0608841103 · DOI · Paper page
- 10.1021/jp806079d · DOI
- 10.1098/rspa.2004.1313 · DOI · Paper page
- 10.1098/rsif.2004.0004 · DOI · Paper page
- Kim S., 2006, Appl. Phys. Lett., 89, 3
- 10.1021/la7010502 · DOI · Paper page
- 10.1002/adma.200700733 · DOI · Paper page
- 10.1021/la0633987 · DOI · Paper page
- 10.1039/b924056j · DOI · Paper page
- 10.1039/C2SM06614A · DOI
- 10.1002/adma.200700023 · DOI · Paper page
- 10.1126/science.1159503 · DOI · Paper page
- 10.1098/rsif.2007.1308 · DOI · Paper page
- Lee J. H., 2008, Appl. Phys. Lett., 93, 3
- Allyn F., 1997, Why Didn't I Think of That: Bizarre Origins of Ingenious Inventions We Couldn't Live Without, 99
- 10.1098/rsta.2001.0926 · DOI
- 10.1002/adma.201103022 · DOI · Paper page
- McMeeking R. M., 2009, J. Appl. Mech.‐Trans. ASME, 76
- 10.1021/nl900343b · DOI · Paper page
- 10.1002/adfm.200901178 · DOI
- 10.1021/la200893n · DOI
- 10.1002/adfm.201001652 · DOI
- 10.1021/am3009289 · doi:10.1021/am3009289
- Pang C., 2011, Langmuir
- 10.1021/la061372 · doi:10.1021/la061372
- 10.1021/ar100001a · DOI · Paper page
- 10.1039/b916204f · DOI · Paper page
- 10.1021/la9046403 · DOI · Paper page
- 10.1021/cm800173c · DOI · Paper page
- 10.1039/b909885b · DOI · Paper page
- 10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- 10.1016/j.polymer.2011.08.003 · DOI · Paper page
- 10.1021/la0113567 · DOI · Paper page
- Timoshenko S., 1961, Theory of Elastic Stability
- 10.1007/978-1-84882-181-1 · doi:10.1007/978-1-84882-181-1
- 10.1103/PhysRevLett.107.177802 · DOI
- Ross C. T. F., 1996, Mechanics of Solids
- 10.1039/c1sm05146f · doi:10.1039/c1sm05146f
- 10.1021/am201727a · DOI · Paper page
- 10.1017/CBO9781139171731 · DOI · Paper page
- Sumer B., 2010, J. Appl. Phys., 107
- 10.1088/0022-3727/8/13/005 · DOI · Paper page
- Kim S., 2007, Appl. Phys. Lett., 91
- 10.1002/adem.201000104 · DOI · Paper page
- Kroner E., 2012, Rev. Sci. Instrum., 83
- 10.1080/00218464.2011.575317 · DOI
- 10.1016/j.polymer.2009.02.035 · DOI · Paper page
Cited by
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Self-citationA Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Mimicking Human and Biological Skins for Multifunctional Skin Electronics
Lee, Y., Park, J., Choe, A., Cho, S., Kim, J., & Ko, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904523 · Cited by 465
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Metadata
- Authors
- Chen, C., Chiang, C., Lai, C., Xie, T., & Yang, S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2013-03-06
- Volume
- 23
- Issue
- 30
- Pages
- 3813-3823
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2105762484
- Cited by
- 96
- References
- 6
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Buckling‐Based Strong Dry Adhesives Via Interlocking. https://app.cochat.ai/papers/10.1002/adfm.201300052
- The paper
- Chen, C., Chiang, C., Lai, C., Xie, T., & Yang, S. (2013). Buckling‐Based Strong Dry Adhesives Via Interlocking. Advanced Functional Materials. https://doi.org/10.1002/adfm.201300052
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.