The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Plasticization of PEDOT:PSS by Common Additives for Mechanically Robust Organic Solar Cells and Wearable Sensors
Abstract
Despite the ubiquity of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in applications demanding mechanical flexibility, the effect on the mechanical properties of common additives—i.e., dimethylsulfoxide (DMSO), Zonyl fluorosurfactant (Zonyl), and poly(ethyleneimine) (PEI)—has not been reported. This paper describes these effects and uses plasticized films in solar cells and mechanical sensors for the detection of human motion. The tensile moduli of films spin‐coated from solutions containing 0%, 5%, and 10% DMSO and 0.1%, 1%, and 10% Zonyl (nine samples total) are measured using the buckling technique, and the ductility is inferred from measurements of the strain at which cracks form on elastic substrates. Elasticity and ductility are maximized in films deposited from solutions containing 5% DMSO and 10% Zonyl, but the conductivity is greatest for samples containing 0.1% Zonyl. These experiments reveal enlargement of presumably PEDOT‐rich grains, visible by atomic force microscopy, when the amount of DMSO is increased from 0% to 5%. PEI—which is used to lower the work function of PEDOT:PSS—has a detrimental effect on the mechanical properties of the PEDOT:PSS/PEI bilayer films. Wearable electronic sensors employing PEDOT:PSS films containing 5% DMSO and 10% Zonyl are fabricated, which exhibit detectable responses at 20% strain and high mechanical robustness through elastic deformation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics
Zhou, Y., Fuentes-Hernandez, C., Shim, J., Meyer, J., Giordano, A. J., Li, H., Winget, P., Papadopoulos, T., Cheun, H., Kim, J., et al. (2012) · Science · doi:10.1126/science.1218829 · Cited by 2,140
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
A buckling-based metrology for measuring the elastic moduli of polymeric thin films
Stafford, C. M., Harrison, C., Beers, K. L., Karim, A., Amis, E. J., VanLandingham, M. R., Kim, H.-C., Volksen, W., Miller, R. D., & Simonyi, E. E. (2004) · Nature Materials · doi:10.1038/nmat1175 · Cited by 1,360
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,174
Self-citationHighly Conductive PEDOT:PSS Nanofibrils Induced by Solution‐Processed Crystallization
Kim, N., Kee, S., Lee, S. H., Lee, B. H., Kahng, Y. H., Jo, Y., Kim, B., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201304611 · Cited by 1,148
Fractal design concepts for stretchable electronics
Fan, J. A., Yeo, W.-H., Su, Y., Hattori, Y., Lee, W., Jung, S.-Y., Zhang, Y., Liu, Z., Cheng, H., Falgout, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms4266 · Cited by 1,088
25th Anniversary Article: A Soft Future: From Robots and Sensor Skin to Energy Harvesters
Bauer, S., Bauer‐Gogonea, S., Graz, I., Kaltenbrunner, M., Keplinger, C., & Schwödiauer, R. (2014) · Advanced Materials · doi:10.1002/adma.201303349 · Cited by 860
Stretchable Organic Solar Cells
Lipomi, D. J., Tee, B. C. ‐., Vosgueritchian, M., & Bao, Z. (2011) · Advanced Materials · doi:10.1002/adma.201004426 · Cited by 853
Self-citationThe Rise of Organic Bioelectronics
Rivnay, J., Owens, R. M., & Malliaras, G. G. (2014) · Chemistry of Materials · doi:10.1021/cm4022003 · Cited by 713
Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates
Lipomi, D. J., Lee, J. A., Vosgueritchian, M., Tee, B. C.-K., Bolander, J. A., & Bao, Z. (2012) · Chemistry of Materials · doi:10.1021/cm203216m · Cited by 580
Self-citationSolar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Metal films on polymer substrates stretched beyond 50%
Lu, N., Wang, X., Suo, Z., & Vlassak, J. (2007) · Applied Physics Letters · doi:10.1063/1.2817234 · Cited by 410
Mechanical characterization of PEDOT:PSS thin films
Lang, U., Naujoks, N., & Dual, J. (2009) · Synthetic Metals · doi:10.1016/j.synthmet.2008.11.005 · Cited by 364
Stretchable GaAs Photovoltaics with Designs That Enable High Areal Coverage
Lee, J., Wu, J., Shi, M., Yoon, J., Park, S., Li, M., Liu, Z., Huang, Y., & Rogers, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003961 · Cited by 318
Fully Solution-Processed Inverted Polymer Solar Cells with Laminated Nanowire Electrodes
Gaynor, W., Lee, J.-Y., & Peumans, P. (2010) · ACS Nano · doi:10.1021/nn900758e · Cited by 287
Elastic Moduli of Organic Electronic Materials by the Buckling Method
Tahk, D., Lee, H. H., & Khang, D.-Y. (2009) · Macromolecules · doi:10.1021/ma900137k · Cited by 257
Savagatrup, S., Makaram, A. S., Burke, D. J., & Lipomi, D. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302646 · Cited by 245
Self-citationHighly Stretchable Transistors Using a Microcracked Organic Semiconductor
Chortos, A., Lim, J., To, J. W. F., Vosgueritchian, M., Dusseault, T. J., Kim, T., Hwang, S., & Bao, Z. (2014) · Advanced Materials · doi:10.1002/adma.201305462 · Cited by 243
Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells
Dupont, S. R., Oliver, M. S., Krebs, F. C., & Dauskardt, R. H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.10.012 · Cited by 209
Hansen, T. S., West, K., Hassager, O., & Larsen, N. B. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601243 · Cited by 194
Tait, J. G., Worfolk, B. J., Maloney, S. A., Hauger, T. C., Elias, A. L., Buriak, J. M., & Harris, K. D. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.09.005 · Cited by 189
Molecularly Stretchable Electronics
Savagatrup, S., Printz, A. D., O’Connor, T. F., Zaretski, A. V., & Lipomi, D. J. (2014) · Chemistry of Materials · doi:10.1021/cm501021v · Cited by 184
Self-citationLipomi, D. J., Chong, H., Vosgueritchian, M., Mei, J., & Bao, Z. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.013 · Cited by 182
Self-citationDecohesion Kinetics of PEDOT:PSS Conducting Polymer Films
Dupont, S. R., Novoa, F. D., Vörösházi, E., & Dauskardt, R. H. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201302174 · Cited by 151
Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2014) · Macromolecules · doi:10.1021/ma500286d · Cited by 151
Self-citationAwartani, O., Lemanski, B. I., Ro, H. W., Richter, L. J., DeLongchamp, D. M., & O’Connor, B. T. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200595 · Cited by 149
Pó, R., Carbonera, C., Bernardi, A., Tinti, F., & Camaioni, N. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.12.022 · Cited by 146
Conducting Polymer Electrodes for Electroencephalography
Leleux, P., Badier, J., Rivnay, J., Bénar, C., Hervé, T., Chauvel, P., & Malliaras, G. G. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201300311 · Cited by 110
Cohesion and device reliability in organic bulk heterojunction photovoltaic cells
Brand, V., Bruner, C., & Dauskardt, R. H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.11.035 · Cited by 106
Soft and flexible PEDOT/PSS films for applications to soft actuators
Li, Y., Tanigawa, R., & Okuzaki, H. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/7/074010 · Cited by 105
Piezoresistive properties of PEDOT:PSS
Lang, U., Rüst, P., Schöberle, B., et al. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.10.024 · Cited by 68
Towards fully polymeric MEMS: Fabrication and testing of PEDOT/PSS strain gauges
Lang, U., Rüst, P., & Dual, J. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.01.051 · Cited by 60
Kwon, S. J., Kim, T. Y., Lee, B. S., Lee, T., Kim, J., & Suh, K. S. (2010) · Synthetic Metals · doi:10.1016/j.synthmet.2010.02.032 · Cited by 22
Cited by
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
A highly stretchable, transparent, and conductive polymer
Wang, Y., Zhu, C., Pfattner, R., Yan, H., Jin, L., Chen, S., Molina-Lopez, F., Lissel, F., Liu, J., Rabiah, N. I., et al. (2017) · Science Advances · doi:10.1126/sciadv.1602076 · Cited by 1,442
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Stretchable Conductive Polymers and Composites Based on PEDOT and PEDOT:PSS
Kayser, L. V., & Lipomi, D. J. (2019) · Advanced Materials · doi:10.1002/adma.201806133 · Cited by 1,186
Self-citationStability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Metadata
- Authors
- Savagatrup, S., Chan, E., Renteria‐Garcia, S. M., Printz, A. D., Zaretski, A. V., O'Connor, T. F., Rodriquez, D., Valle, E., & Lipomi, D. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-11-29
- Volume
- 25
- Issue
- 3
- Pages
- 427-436
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2011667905
- Cited by
- 360
- References
- 36
- FWCI
- 17.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.