The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Epoxy Toughening with Low Graphene Loading
Abstract
The toughening effects of graphene and graphene‐derived materials on thermosetting epoxies are investigated. Graphene materials with various structures and surface functional groups are incorporated into an epoxy resin by in situ polymerization. Graphene oxide (GO) and GO modified with amine‐terminated poly(butadiene‐acrylonitrile) (ATBN) are chosen to improve the dispersion of graphene nanosheets in epoxy and increase their interfacial adhesion. An impressive toughening effect is observed with less than 0.1 wt% graphene. A maximum in toughness at loadings as small as 0.02 wt% or 0.04 wt% is observed for all four types of graphene studied. An epoxy nanocomposite with ATBN‐modified GO shows a 1.5‐fold improvement in fracture toughness and a corresponding 2.4‐fold improvement in fracture energy at 0.04 wt% of graphene loading. At such low loadings, these graphene‐type materials become economically feasible components of nanocomposites. A microcrack mechanism is proposed based on microscopy of the fracture surfaces. Due to the stress concentration by graphene nanosheets, microcracks may be formed to absorb the fracture energy. However, above a certain graphene concentration, the coalescence of microcracks appears to facilitate crack propagation, lowering the fracture toughness. Crack deflection and pinning likely contribute to the slow increase in fracture toughness at higher loadings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Average stress in matrix and average elastic energy of materials with misfitting inclusions
Mori, T., & Tanaka, K. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90064-3 · Cited by 8,189
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Graphene/Polymer Nanocomposites
Kim, H., Abdala, A. A., & Macosko, C. W. (2010) · Macromolecules · doi:10.1021/ma100572e · Cited by 3,406
Self-citationEnhanced Mechanical Properties of Nanocomposites at Low Graphene Content
Reif, J., Rafiee, J., Wang, Z., Song, H., Yu, Z.-Z., & Koratkar, N. (2009) · ACS Nano · doi:10.1021/nn9010472 · Cited by 2,890
Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets
Stankovich, S., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.004 · Cited by 2,224
Freeze-drying of nanoparticles: Formulation, process and storage considerations
ABDELWAHED, W., DEGOBERT, G., STAINMESSE, S., & FESSI, H. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.09.017 · Cited by 1,611
Gojny, F. H., Wichmann, M. H. G., Köpke, U., Fiedler, B., & Schulte, K. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.04.002 · Cited by 1,543
Toughening mechanisms of nanoparticle-modified epoxy polymers
Johnsen, B. B., Kinloch, A. J., Mohammed, R. D., Taylor, A. C., & Sprenger, S. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.038 · Cited by 942
Fracture and Fatigue in Graphene Nanocomposites
Reif, J., Rafiee, J., Srivastava, I., Wang, Z., Song, H., Yu, Z., & Koratkar, N. (2010) · Small · doi:10.1002/smll.200901480 · Cited by 907
Toughening mechanisms in elastomer-modified epoxies: Part 1 Mechanical studies
Yee, A. F., & Pearson, R. A. (1986) · Journal of Materials Science · doi:10.1007/bf01114293 · Cited by 857
Effect of defects on the intrinsic strength and stiffness of graphene
Zandiatashbar, A., Lee, G.-H., An, S. J., Lee, S., Mathew, N., Terrones, M., Hayashi, T., Picu, C. R., Hone, J., & Koratkar, N. (2014) · Nature Communications · doi:10.1038/ncomms4186 · Cited by 743
Tandon, G. P., & Weng, G. J. (1984) · Polymer Composites · doi:10.1002/pc.750050413 · Cited by 685
Fracture toughness and failure mechanism of graphene based epoxy composites
Chandrasekaran, S., Sato, N., Tölle, F., Mülhaupt, R., Fiedler, B., & Schulte, K. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.03.014 · Cited by 594
Impressive Fatigue Life and Fracture Toughness Improvements in Graphene Oxide/Epoxy Composites
Bortz, D. R., Heras, E. G., & Martin-Gullon, I. (2012) · Macromolecules · doi:10.1021/ma201563k · Cited by 514
Li, W., Tang, X.-Z., Zhang, H.-B., Jiang, Z.-G., Yu, Z.-Z., Du, X.-S., & Mai, Y.-W. (2011) · Carbon · doi:10.1016/j.carbon.2011.06.077 · Cited by 401
Aqueous Only Route toward Graphene from Graphite Oxide
Liao, K.-H., Mittal, A., Bose, S., Leighton, C., Mkhoyan, K. A., & Macosko, C. W. (2011) · ACS Nano · doi:10.1021/nn1028967 · Cited by 292
Self-citationKunz, S. C., Sayre, J. A., & Assink, R. A. (1982) · Polymer · doi:10.1016/0032-3861(82)90215-4 · Cited by 247
Micellar structure and mechanical properties of block copolymer‐modified epoxies
Dean, J. M., Lipic, P. M., Grubbs, R. B., Cook, R. F., & Bates, F. S. (2001) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10062 · Cited by 224
Qian, Y., Ismail, I. M., & Stein, A. (2014) · Carbon · doi:10.1016/j.carbon.2013.10.082 · Cited by 213
Self-citationSynthesis of amphiphilic graphite oxide
Xu, C., Wu, X., Zhu, J., & Wang, X. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.045 · Cited by 205
Covalently bonded interfaces for polymer/graphene composites
Ma, J., Meng, Q., Michelmore, A., Kawashima, N., Izzuddin, Z., Bengtsson, C., & Kuan, H.-C. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01277h · Cited by 194
Covalent bonded polymer–graphene nanocomposites
Pramoda, K. P., Hussain, H., Koh, H. M., Tan, H. R., & He, C. B. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.24212 · Cited by 177
Reinforcement in melt-processed polymer–graphene composites at extremely low graphene loading level
Istrate, O. M., Paton, K. R., Khan, U., O’Neill, A., Bell, A. P., & Coleman, J. N. (2014) · Carbon · doi:10.1016/j.carbon.2014.06.077 · Cited by 155
Structure–property relations of 55 nm particle-toughened epoxy
Le, Q.-H., Kuan, H., Dai, J., et al. (2010) · Polymer · doi:10.1016/j.polymer.2010.08.038 · Cited by 112
Synthesis and Properties of Vermiculite-Reinforced Polyurethane Nanocomposites
Qian, Y., Lindsay, C. I., Macosko, C. W., & Stein, A. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am2008954 · Cited by 112
Self-citationUltralow percolation graphene/polyurethane acrylate nanocomposites
Liao, K.-H., Qian, Y., & Macosko, C. W. (2012) · Polymer · doi:10.1016/j.polymer.2012.06.020 · Cited by 79
Self-citationRole of Localized Network Damage in Block Copolymer Toughened Epoxies
Declet-Perez, C., Redline, E., Francis, L. F., & Bates, F. S. (2012) · ACS Macro Letters · doi:10.1021/mz200219y · Cited by 64
Cited by
Park, J. J., Hyun, W. J., Mun, S. C., Park, Y. T., & Park, O. O. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00695 · Cited by 598
Self-citationA comprehensive review on graphene-based anti-corrosive coatings
Cui, G., Bi, Z., Zhang, R., Liu, J., Yu, X., & Li, Z. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.034 · Cited by 504
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Functional epoxy vitrimers and composites
Yang, Y., Xu, Y., Ji, Y., & Wei, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100710 · Cited by 463
Wu, S., Ladani, R. B., Zhang, J., Bafekrpour, E., Ghorbani, K., Mouritz, A. P., Kinloch, A. J., & Wang, C. H. (2015) · Carbon · doi:10.1016/j.carbon.2015.07.026 · Cited by 393
Metadata
- Authors
- Park, Y. T., Qian, Y., Chan, C., Suh, T., Nejhad, M. G., Macosko, C. W., & Stein, A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-12-06
- Volume
- 25
- Issue
- 4
- Pages
- 575-585
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2008151065
- Cited by
- 362
- References
- 31
- FWCI
- 27.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.