The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Mechanical Surface Modification of Lithium Metal: Towards Improved Li Metal Anode Performance by Directed Li Plating
Abstract
The effect of mechanical surface modification on the performance of lithium (Li) metal foil electrodes is systematically investigated. The applied micro‐needle surface treatment technique for Li metal has various advantages. 1) This economical and efficient technique is able to cover a wide range of surface area with a simple rolling process, which can be easily conducted. 2) This technique achieves improved rate capability and cycling stability, as well as a reduced interfacial resistance. The micro‐needle treatment improves the rate capability by 20% (0.750 mAh at a rate of 7C) and increases the cycling stability by 200% (85% of the initial discharge capacity after 150 cycles) compared to untreated bare Li metal (0.626 mAh at a rate of 7C, 85% of the initial discharge capacity after only 70 cycles). 3) This technique efficiently suppresses Li formation of high surface area Li during the Li deposition process, as preferred sites for controlled Li plating are generated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery
Abraham, K. M., & Jiang, Z. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836378 · Cited by 2,092
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Microfabricated Microneedles: A Novel Approach to Transdermal Drug Delivery
Henry, S., McAllister, D. V., Allen, M. G., & Prausnitz, M. R. (1998) · Journal of Pharmaceutical Sciences · doi:10.1021/js980042+ · Cited by 1,346
Lu, Y.-C., Xu, Z., Gasteiger, H. A., Chen, S., Hamad-Schifferli, K., & Shao-Horn, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1036572 · Cited by 1,238
An improved high-performance lithium–air battery
Jung, H.-G., Hassoun, J., Park, J.-B., Sun, Y.-K., & Scrosati, B. (2012) · Nature Chemistry · doi:10.1038/nchem.1376 · Cited by 1,089
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Hierarchically Porous Graphene as a Lithium–Air Battery Electrode
Xiao, J., Mei, D., Li, X., Xu, W., Wang, D., Graff, G. L., Bennett, W. D., Nie, Z., Saraf, L. V., Aksay, I. A., et al. (2011) · Nano Letters · doi:10.1021/nl203332e · Cited by 990
Winter, M. (2009) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2009.6086 · Cited by 807
Self-citationMussel‐Inspired Polydopamine‐Treated Polyethylene Separators for High‐Power Li‐Ion Batteries
Ryou, M., Lee, Y. M., Park, J., & Choi, J. W. (2011) · Advanced Materials · doi:10.1002/adma.201100303 · Cited by 721
Self-citationMulti-electron reaction materials for high energy density batteries
Gao, X.-P., & Yang, H.-X. (2010) · Energy Environ. Sci. · doi:10.1039/b916098a · Cited by 624
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Catalytic Activity Trends of Oxygen Reduction Reaction for Nonaqueous Li-Air Batteries
Lu, Y.-C., Gasteiger, H. A., & Shao-Horn, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208608s · Cited by 567
A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte
Yamaki, J.-I., Tobishima, S.-I., Hayashi, K., Saito, K., Nemoto, Y., & Arakawa, M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00067-6 · Cited by 483
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Self-citationDevelopments in electrode materials and electrolytes for aluminium–air batteries
Egan, D. R., Ponce de León, C., Wood, R. J. K., Jones, R. L., Stokes, K. R., & Walsh, F. C. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.141 · Cited by 465
Rechargeable Lithium/TEGDME-LiPF[sub 6]∕O[sub 2] Battery
Laoire, C. O., Mukerjee, S., Plichta, E. J., Hendrickson, M. A., & Abraham, K. M. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3531981 · Cited by 439
Lithium metal stripping/plating mechanisms studies: A metallurgical approach
Gireaud, L., Grugeon, S., Laruelle, S., Yrieix, B., & Tarascon, J.-M. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.07.037 · Cited by 436
Li−Air Rechargeable Battery Based on Metal-free Graphene Nanosheet Catalysts
Yoo, E., & Zhou, H. (2011) · ACS Nano · doi:10.1021/nn200084u · Cited by 400
Wagner, R., Preschitschek, N., Passerini, S., Leker, J., & Winter, M. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0533-6 · Cited by 395
Self-citationLi–O2 Battery with a Dimethylformamide Electrolyte
Chen, Y., Freunberger, S. A., Peng, Z., Bardé, F., & Bruce, P. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302178w · Cited by 387
Lithium–oxygen batteries—Limiting factors that affect performance
Padbury, R. P., & Zhang, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.032 · Cited by 348
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310
Donnelly, R. F., Garland, M. J., Morrow, D. I. J., Migalska, K., Singh, T. R. R., Majithiya, R., & Woolfson, A. D. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.08.008 · Cited by 307
Acne scarring treatment using skin needling
Fabbrocini, G., Fardella, N., Monfrecola, A., Proietti, I., & Innocenzi, D. (2009) · Clinical and Experimental Dermatology · doi:10.1111/j.1365-2230.2009.03291.x · Cited by 254
Park, M., Sun, H., Lee, H., Lee, J., & Cho, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200020 · Cited by 207
Besenhard, J. O., & Winter, M. (2002) · ChemPhysChem · Cited by 201
Self-citationCoated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Self-citationBesenhard, J. O., Wagner, M. W., Winter, M., Jannakoudakis, A. D., Jannakoudakis, P. D., & Theodoridou, E. (1993) · Journal of Power Sources · doi:10.1016/0378-7753(93)80183-p · Cited by 179
Self-citationA microneedle roller for transdermal drug delivery
Park, J.-H., Choi, S.-O., Seo, S., Choy, Y. B., & Prausnitz, M. R. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.07.001 · Cited by 166
Seong, I. W., Hong, C. H., Kim, B. K., & Yoon, W. Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.062 · Cited by 150
The effect of oxygen pressures on the electrochemical profile of lithium/oxygen battery
Yang, X., & Xia, Y. (2009) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-009-0791-8 · Cited by 136
Composite protective layer for Li metal anode in high-performance lithium–oxygen batteries
Lee, D. J., Lee, H., Song, J., Ryou, M., Lee, Y. M., Kim, H., & Park, J.-K. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.12.022 · Cited by 123
Self-citationInsertion reactions in advanced electrochemical energy storage
Besenhard, J. O., & Winter, M. (1998) · Pure and Applied Chemistry · doi:10.1351/pac199870030603 · Cited by 109
Self-citationRecent advances in liquid and polymer lithium-ion batteries
Hassoun, J., Reale, P., & Scrosati, B. (2007) · Journal of Materials Chemistry · doi:10.1039/b707040n · Cited by 104
Modified carbons for improved anodes in lithium ion cells
Buqa, H., Golob, P., Winter, M., & Besenhard, J. O. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00523-7 · Cited by 92
Self-citationInfluence of microneedle shape on the transport of a fluorescent dye into human skin in vivo
Bal, S. M., Kruithof, A. C., Zwier, R., Dietz, E., Bouwstra, J. A., Lademann, J. M., & Meinke, M. C. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.07.104 · Cited by 86
Leheta, T. M., Tawdy, A. E., Hay, R. M. A., & Farid, S. M. (2011) · Dermatologic Surgery · doi:10.1111/j.1524-4725.2010.01854.x · Cited by 73
Improvement in lithium cycling efficiency by using lithium powder anode
Kim, J. S., & Yoon, W. Y. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.12.071 · Cited by 56
Winter, M., & Besenhard, J. O. (1999) · Chemie in unserer Zeit · doi:10.1002/ciuz.19990330503 · Cited by 54
Self-citationWiederaufladbare Batterien- 1.Teil; Akkumulatoren mit wässriger Elektrolytlösung
Winter, M., & Besenhard, J. O. (1999) · Chemie in unserer Zeit · Cited by 32
Self-citation
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Self-citationWinter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Self-citation
Metadata
- Authors
- Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-12-02
- Volume
- 25
- Issue
- 6
- Pages
- 834-841
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2060701132
- Cited by
- 412
- References
- 47
- FWCI
- 12.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.