Cited by 1,699Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsBattery Modeling and Management

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Zhang, Xue‐Qiang, Cheng, Xin‐Bing, Chen, Xiang, Yan, Chong, Zhang, Qiang·2017·Advanced Functional Materials

DOI 10.1002/adfm.201605989

Open this paper in CoChat — free account

Abstract

Lithium (Li) metal has been considered as an important substitute for the graphite anode to further boost the energy density of Li‐ion batteries. However, Li dendrite growth during Li plating/stripping causes safety concern and poor lifespan of Li metal batteries (LMB). Herein, fluoroethylene carbonate (FEC) additives are used to form a LiF‐rich solid electrolyte interphase (SEI). The FEC‐induced SEI layer is compact and stable, and thus beneficial to obtain a uniform morphology of Li deposits. This uniform and dendrite‐free morphology renders a significantly improved Coulombic efficiency of 98% within 100 cycles in a Li | Cu half‐cell. When the FEC‐protected Li metal anode matches a high‐loading LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NMC) cathode (12 mg cm −2 ), a high initial capacity of 154 mAh g −1 (1.9 mAh cm −2 ) at 180.0 mA g −1 is obtained. This LMB with conversion‐type Li metal anode and intercalation‐type NMC cathode affords an emerging energy storage system to probe the energy chemistry of Li metal protection and demonstrates the material engineering of batteries with very high energy density.

Integrity signals

Registry

Crossref · 10.1002/adfm.201605989

Cites

0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Density-functional thermochemistry. III. The role of exact exchange
Becke, A. D. (1993) · The Journal of Chemical Physics · doi:10.1063/1.464913 · Cited by 103,767
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation
Michan, A. L., Parimalam, B. S., Leskes, M., Kerber, R. N., Yoon, T., Grey, C. P., & Lucht, B. L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02282 · Cited by 541

Flagged first, then by citations

Show all 0 references

Research works printed but not linked: 75

10.1038/35104644 · DOI
10.1126/science.1212741 · DOI · Paper page
10.1038/nenergy.2016.114 · DOI
10.1021/acs.jpclett.6b00080 · DOI
10.1038/nenergy.2016.71 · DOI
10.1039/C3EE40795K · DOI
10.1002/advs.201500213 · DOI
10.1016/S0378-7753(01)00734-0 · DOI
10.1021/acs.accounts.5b00427 · DOI
10.1002/adma.201506124 · DOI
10.1002/adma.201504117 · DOI
10.1038/ncomms9058 · DOI
10.1002/adma.201504526 · DOI
10.1149/2.0151605jes · DOI
10.1021/cr030203g · DOI
10.1039/c4cs00020j · DOI
10.1149/2.0041514jes · DOI
10.1016/S0167-2738(02)00080-2 · DOI
10.1002/advs.201600168 · DOI
10.1016/j.electacta.2003.09.010 · DOI
10.1016/j.elecom.2014.12.008 · DOI
10.1149/2.0011507jes · DOI
10.1002/adma.201501490 · DOI
10.1149/1.3148721 · DOI
10.1016/j.jpowsour.2016.05.009 · DOI
10.1021/ja312241y · DOI
10.1016/j.jpowsour.2016.07.056 · DOI
10.1038/ncomms8436 · DOI
10.1016/j.ensm.2016.01.007 · DOI
10.1016/j.jpowsour.2015.01.030 · DOI
10.1038/nmat4041 · DOI
10.1002/aenm.201501933 · DOI
10.1038/ncomms2513 · DOI
10.1002/adma.201405115 · DOI
10.1016/j.ensm.2015.09.008 · DOI
10.1002/aenm.201402273 · DOI
10.1002/aenm.201500117 · DOI
10.1002/adma.201501490 · DOI
10.1002/aenm.201501010 · DOI
10.1002/aenm.201400993 · DOI
10.1002/aenm.201502151 · DOI
10.1039/C6EE00123H · DOI
10.1149/2.001404jes · DOI
10.1021/la203712s · DOI
10.1021/acs.chemmater.5b00339 · DOI
10.1021/la501368y · DOI
10.1016/j.electacta.2015.04.030 · DOI
10.1103/PhysRevB.91.134116 · DOI
10.1016/j.jpowsour.2015.09.055 · DOI
10.1016/j.jpowsour.2016.04.017 · DOI
10.1021/acsnano.5b01990 · DOI
10.1088/0965-0393/21/7/074005 · DOI
10.1149/2.0021513jes · DOI
10.1002/admi.201600438 · DOI
10.1002/cssc.201300770 · DOI
10.1021/am200973k · DOI
10.1002/aenm.201502185 · DOI
10.1002/advs.201600013 · DOI
10.1002/adma.201400794 · DOI
10.1016/j.jpowsour.2013.12.099 · DOI
10.1002/advs.201600066 · DOI
10.1002/admi.201600172 · DOI
10.1021/acs.jpcc.5b03591 · DOI
10.1021/am508593s · DOI
10.1002/smll.201401521 · DOI
10.1149/1.1836979 · DOI
10.1016/j.jpowsour.2006.07.074 · DOI
10.1149/2.100310jes · DOI
10.1002/aelm.201500246 · DOI
10.1063/1.458452 · DOI
10.1063/1.1316015 · DOI
10.1524/zkri.220.5.567.65075 · DOI
10.1002/adma.201501082 · DOI
10.1002/(SICI)1096-987X(199806)19:8<935::AID-JCC12>3.0.CO;2-6 · DOI
10.1080/00268970110089108 · DOI

Sorted by citations

Items 301–400 of 1,002

Lithium Dendrite Suppression with a Silica Nanoparticle-Dispersed Colloidal Electrolyte
Lee, J. H., Lim, H., Cao, X., Ren, X., Kwak, W., Rodríguez‐Pérez, I. A., Zhang, J., Lee, H., & Kim, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09871 · Cited by 51
Revisiting the strategies for stabilizing lithium metal anodes
Um, J., Kim, K., Park, J., Sung, Y.-E., & Yu, S.-H. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta03774e · Cited by 42
Thermal Stable Poly-dioxolane based Electrolytes via a Robust Crosslinked Network for Dendrite-free Solid-State Li-metal Batteries
Cui, J., Du, Y., Zhao, L., Li, X., Sun, Z., Li, D., & Li, H. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141973 · Cited by 41
Highly conductive self-healing polymer electrolytes based on synergetic dynamic bonds for highly safe lithium metal batteries
Zhou, S.-P., Deng, K.-R., Xu, Z.-L., Xiao, M., & Meng, Y.-Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136083 · Cited by 41
FEC Additive for Improved SEI Film and Electrochemical Performance of the Lithium Primary Battery
Zhou, X., Li, P., Tang, Z., Liu, J.-L., Zhang, S.-W., Zhou, Y.-K., & Tian, X. (2021) · Energies · doi:10.3390/en14227467 · Cited by 41
“The high LiF content of the SEI film can reduce the impedance of the electrode interface film and effectively reduce the diffusion impedance of Li+, thus increasing the performance of the lithium primary battery [17].”
Background
Layered double hydroxides and their derivatives for lithium–sulfur batteries
Cui, J., Li, Z., Wang, G., Guo, J. T., & Shao, M. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08573a · Cited by 77
Tailoring the Mechanical and Electrochemical Properties of an Artificial Interphase for High‐Performance Metallic Lithium Anode
Sun, Y., Amirmaleki, M., Zhao, Y., Zhao, C., Liang, J.-N., Wang, C.-H., Adair, K. R., Li, J.-J., Cui, T., Wang, G.-R., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001139 · Cited by 41
Mesoporous carbon host material for stable lithium metal anode.
Jeong, J., Chun, J., Lim, W.-G., Kim, W., Jo, C., & Lee, J.-W. (2020) · Nanoscale · doi:10.1039/d0nr02258f · Cited by 41
High-Efficiency Lithium Metal Anode Enabled by a Concentrated/Fluorinated Ester Electrolyte.
Chen, S.-J., Xiang, Y., Zheng, G.-R., Liao, Y., Ren, F., Zheng, Y., He, H., Zheng, B., Liu, X., Xu, N.-B., et al. (2020) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.0c06930 · Cited by 41
Stable Lithium Metal Anode Achieved by In Situ Grown CuO Nanowire Arrays on Cu Foam
Cao, J., Deng, L., Wang, X., Li, W., Xie, Y., Zhang, J., & Cheng, S. (2020) · doi:10.1021/acs.energyfuels.0c01180 · Cited by 41
Spatially Distributed Lithiophilic Gradient in Low‐Tortuosity 3D Hosts via Capillary Action for High‐Performance Li Metal Anodes
Zhu, Z.-X., Liu, B., Qian, Y., Fang, Y.-Y., Lei, X., Liu, X.-M., Zhou, J.-B., Qian, Y.-T., & Wang, G.-M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202203687 · Cited by 40
Chemically presodiated Sb with a fluoride-rich interphase as a cycle-stable anode for high-energy sodium ion batteries
Liu, M., Yang, Z., Shen, Y.-F., Guo, S.-M., Zhang, J.-Y., Ai, X.-P., Yang, H.-X., & Qian, J.-F. (2021) · doi:10.1039/d0ta10880d · Cited by 40
Decoupling Interfacial Reactions at Anode and Cathode by Combining Online Electrochemical Mass Spectroscopy with Anode‐Free Li‐Metal Battery
Shitaw, K. N., Yang, S.-C., Jiang, S., Huang, C.-J., Sahalie, N. A., Nikodimos, Y., Weldeyohannes, H. H., Wang, C.-H., Wu, S.-H., Su, W.-N., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006951 · Cited by 40
Design rules for liquid crystalline electrolytes for enabling dendrite-free lithium metal batteries
Ahmad, Z., Hong, Z., & Viswanathan, V. (2020) · Proceedings of the National Academy of Sciences of the United States of America · doi:10.1073/pnas.2008841117 · Cited by 40
A novel flame‐retardant electrolyte additive for safer lithium‐ion batteries
Yan, P., Zhu, Y., Pan, X., & Ji, H. (2020) · International Journal of Energy Research · doi:10.1002/er.5972 · Cited by 40
“In order to overcome such problems, many efforts have been devoted on investigating safety additives such as flame-retardants and overcharge protection to reduce the fire hazard of the battery.(8-14) In previous research, flameretardant additives are commonly used in battery applications to improve the stability of th…”
Background
Dual‐gradient Engineering of Urchin‐like Silver@Copper Oxide Heterostructures for Highly Stable Lithium Metal Anodes
Gao, M., Dong, Q.-J., Yao, M.-J., Wang, X.-K., Li, J.-Y., Zhang, W., Huang, H., Guo, H., Sun, Z.-Y., Chen, Q., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202401442 · Cited by 39
Dual Flame‐Retardant Mechanism‐Assisted Suppression of Thermal Runaway in Lithium Metal Batteries with Improved Electrochemical Performances
Yang, J. H., Jeong, Y. K., Kim, W., Lee, M. A., Choi, J. W., Kim, H.-S., & Kim, K. J. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202304366 · Cited by 39
Fluorine chemistry in lithium-ion and sodium-ion batteries
Pan, Z., Chen, H., Zeng, Y., Ding, Y., Pu, X.-J., & Chen, Z.-X. (2023) · Energy Materials · doi:10.20517/energymater.2023.61 · Cited by 39
Artificial Graphite Paper as a Corrosion‐Resistant Current Collector for Long‐Life Lithium Metal Batteries
Li, Y.-M., Guo, Q., Wu, Y., Ying, D.-F., Yu, Y., Chi, T.-S., Xia, S., Zhou, X.-F., & Liu, Z.-P. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214523 · Cited by 39
Non-flammable fluorobenzene-diluted highly concentrated electrolytes enable high-performance Li-metal and Li-ion batteries.
Liu, M., Zeng, Z.-Q., Zhong, W., Ge, Z., Li, L., Lei, S., Wu, Q., Zhang, H., Cheng, S.-J., & Xie, J. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.03.133 · Cited by 39
Ion‐Conductive Polytitanosiloxane Networks Enable a Robust Solid‐Electrolyte Interface for Long‐Cycling Lithium Metal Anodes
Zhong, Y., Huang, P., Yan, W., Su, Z., Sun, C., Xing, Y., & Lai, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202110347 · Cited by 39
Constructing nanoporous Ni foam current collectors for stable lithium metal anodes
Liu, S.-K., Zhang, H.-M., Liu, X., Yang, Y., Chi, C., Wang, S., Xue, J., Hao, T.-T., Zhao, J.-P., & Li, Y. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.09.013 · Cited by 39
Lithium-activated SnS–graphene alternating nanolayers enable dendrite-free cycling of thin sodium metal anodes in carbonate electrolyte
Liu, W., Chen, Z., Zhang, Z., Jiang, P., Chen, Y., Paek, E., Wang, Y., & Mitlin, D. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02423f · Cited by 119
High‐Performance Li–O2 Batteries Based on All‐Graphene Backbone
Ma, Y., Wei, L., Gu, Y., Hu, J., Chen, Y.-J., Qi, P., Zhao, X., Peng, Y., Deng, Z., & Liu, Z.-F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007218 · Cited by 39
Lithium Metal Interface Modification for High‐Energy Batteries: Approaches and Characterization
Lee, J.-I., Song, G., Cho, S., Han, D.-Y., & Park, S. (2020) · Batteries & Supercaps · doi:10.1002/batt.202000016 · Cited by 39
Unveiling the Effect Law of Carbon Dots with Polyfunctional Groups on Interface Structure and Ion Migration in Polymer Electrolytes for Solid Lithium Battery
Liu, H., Xu, L.-Q., Zhu, F., Luo, D., Zhang, Y., Deng, W., Zou, G.-Q., Hou, H.-S., & Ji, X.-B. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109623 · Cited by 38
Lithium Difluoro(Bisoxalato) Phosphate-Based Multi-Salt Low Concentration Electrolytes for Wide-Temperature Lithium Metal Batteries: Experiments and Theoretical Calculations
Wang, Y., Zheng, H., Hong, L., Jiang, F.-Y., Liu, Y., Feng, X., Zhou, R.-L., Sun, Y., & Xiang, H. (2022) · Social Science Research Network · doi:10.2139/ssrn.4037161 · Cited by 38
Boosting the cycling stability of hard carbon with NaODFB-based electrolyte at high temperature
Zhao, D., Lu, H., Li, S., Wang, P., & Fan, X. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.100866 · Cited by 38
Natural Protein as Novel Additive of a Commercial Electrolyte for Long-Cycling Lithium Metal Batteries
Wang, C., Fu, X., Ying, C., Liu, J., & Zhong, W. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135283 · Cited by 38
Controllably Regulating Ion Transport in Lithium Metal Batteries Via Pore Effect of Metal-Organic Framework-Based Separators
Yao, H., Yan, L.-T., Shen, J.-X., Wang, T., Chen, P., Cong, X., Zhang, S., Jiang, H.-M., & Zhao, X.-B. (2022) · Social Science Research Network · doi:10.2139/ssrn.3983682 · Cited by 38
Fluorinated cyclic siloxane additives for high energy density Li-ion batteries with high nickel cathodes and silicon–carbon anodes
Xu, N.-B., Sun, Y.-O., Shi, J.-W., Chen, J.-N., Liu, G., Zhou, K., He, H., Zhu, J., Zhang, Z., & Yang, Y. (2021) · doi:10.1016/j.jpowsour.2021.230437 · Cited by 38
Nickel Impurities in the Solid-Electrolyte Interphase of Lithium-Metal Anodes Revealed by Cryogenic Electron Microscopy
Vilá, R. A., Huang, W., & Cui, Y. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100188 · Cited by 47
A review on the optimization of electrolytes to enhance lithium-ion batteries' safety and performance under abuse conditions
Awasthi, S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113439 · Cited by 37
An Inorganic-Rich SEI Layer by the Catalyzed Reduction of LiNO3 Enabled by Surface-Abundant Hydrogen Bonding for Stable Lithium Metal Batteries.
Kim, S., Cho, K.-Y., Kwon, J., Sim, K., Seok, D.-H., Tak, H., Jo, J., & Eom, K. (2023) · Small · doi:10.1002/smll.202207222 · Cited by 37
Bifunctional Separator with Ultra-Lightweight MnO2 Coating for Highly Stable Lithium-Sulfur Batteries.
Tian, Y., Zhang, Y.-J., Wu, L., Dong, W.-D., Huang, R., Dong, P.-Y., Yan, M., Liu, J., Mohamed, H., Chen, L.-H., et al. (2023) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.2c20461 · Cited by 37
Boosting Zn metal anode stability: from fundamental science to design principles
Hou, Z.-P., & Zhang, B. (2022) · EcoMat · doi:10.1002/eom2.12265 · Cited by 37
Flame-Retardant and Polysulfide-Suppressed Ether-Based Electrolytes for High-Temperature Li-S Batteries.
He, M., Li, X., Holmes, N., Li, R.-Y., Wang, J.-J., Yin, G., Zuo, P.-J., & Sun, X. (2021) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.1c09492 · Cited by 37
Challenges in regulating interfacial‐chemistry of the sodium‐metal anode for room‐temperature sodium‐sulfur batteries
Soni, C. B., Sungjemmenla, Vineeth, S. K., & Kumar, V. (2021) · Energy Storage · doi:10.1002/est2.264 · Cited by 50
From −20 °C to 150 °C: a lithium secondary battery with a wide temperature window obtained via manipulated competitive decomposition in electrolyte solution
Zheng, T., Xiong, J., Zhu, B., Shi, X.-T., Cheng, Y.-J., Zhao, H.-B., & Xia, Y.-G. (2021) · doi:10.1039/d1ta00895a · Cited by 37
Recent Advances of Electroplating Additives Enabling Lithium Metal Anodes to Applicable Battery Techniques
Wang, X.-S., Mai, W., Guan, X.-C., Liu, Q., Tu, W.-Q., Li, W.-S., Kang, F.-Y., & Li, B.-H. (2020) · Energy & Environmental Materials · doi:10.1002/eem2.12109 · Cited by 37
Unveiling the mechanisms of lithium dendrite suppression by cationic polymer film induced solid–electrolyte interphase modification
Lee, S.-Y., Shangguan, J., Alvarado, J., Betzler, S., Harris, S., Doeff, M., & Zheng, H.-M. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00518e · Cited by 37
Synergetic Coupling of Lithiophilic Sites and Conductive Scaffolds for Dendrite‐Free Lithium Metal Anodes
Chen, X., Li, B.-Q., Zhao, C.-X., Zhang, R., & Zhang, Q. (2020) · Small Methods · doi:10.1002/smtd.201900177 · Cited by 37
Self-citation
Fluorinated graphene as a dual-functional anode to achieve dendrite-free and high-performance lithium metal batteries
Jamaluddin, A., Sin, Y.-Y., Adhitama, E., Prayogi, A., Wu, Y.-T., Chang, J.-K., & Su, C.-Y. (2022) · Carbon · doi:10.1016/j.carbon.2022.06.023 · Cited by 36
Implanting an ion-selective “skin” in electrolyte towards high-energy and safe lithium-sulfur battery
Ma, C., Ni, X.-Y., Zhang, Y., Xia, Q.-B., Zhou, L.-J., Chen, L.-B., Lai, Y., Ji, X.-B., Yan, C.-L., & Wei, W. (2022) · Matter · doi:10.1016/j.matt.2022.04.017 · Cited by 36
Self-citation
Regulated lithium plating and stripping by a nano-scale gradient inorganic–organic coating for stable lithium metal anodes
Sun, Y., Zhao, C., Adair, K. R., Zhao, Y., Goncharova, L., Liang, J.-N., Wang, C.-H., Li, J.-J., Li, R.-Y., Cai, M., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01140e · Cited by 36
Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells
Kazzazi, A., Bresser, D., Kuenzel, M., Hekmatfar, M., Schnaidt, J., Jusys, Z., Diemant, T., Behm, R., Copley, M., Maranski, K., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228975 · Cited by 36
Building MoSe2-Mo2C incorporated hollow fluorinated carbon fibers for Li-S batteries
Xiao, Y., Liu, Y., Qin, G., Han, P., Guo, X., Cao, S., & Liu, F. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108004 · Cited by 44
Unlocking the concentration polarization for Solid-State lithium metal batteries
Yu, J.-M., Zhang, Y.-N., Gao, T.-Y., Zhang, X., Lv, Y., Zhang, Y., Zhang, C., & Liu, W. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150646 · Cited by 35
Self-citation
Polybenzimidazole-reinforced polyethylene oxide-based polymer-in-salt electrolytes enabling excellent structural stability and superior electrochemical performance for lithium metal batteries
Zou, L., Shi, K., Liu, H., Wu, Y., Xu, T., Wang, Q., Chen, Z.-X., Yang, Z.-H., Song, R., Su, J., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142794 · Cited by 35
Modulating Electron Conducting Properties at Lithium Anode Interfaces for Durable Lithium-Sulfur Batteries.
Jin, Q., Zhao, K., Wang, J., Xiao, J.-P., Wu, L., Zhang, X.-Q., Kong, L., Li, L., Lu, H.-Q., Xie, Y., et al. (2022) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.2c16362 · Cited by 35
Self-citation
A Stable Anode-Free Na–S Full Cell at Room Temperature
Geng, M., Han, D.-M., Huang, Z., Wang, S.-J., Xiao, M., Zhang, S., Sun, L.-Y., Huang, S., & Meng, Y.-Z. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.08.008 · Cited by 35
Low‐Tortuous MXene (TiNbC) Accordion Arrays Enabled Fast Ion Diffusion and Charge Transfer in Dendrite‐Free Lithium Metal Anodes
Cao, Z., Chen, H., Du, Z.-G., Gu, J., Zhu, Q.-J., Li, B., & Yang, S.-B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201189 · Cited by 35
Direct Detection of Lithium Exchange across the Solid Electrolyte Interphase by 7Li Chemical Exchange Saturation Transfer
Columbus, D., Arunachalam, V., Glang, F., Avram, L., Haber, S., Zohar, A., Zaiss, M., & Leskes, M. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c02494 · Cited by 35
Potassium Hexafluorophosphate Additive Enables Stable Lithium–Sulfur Batteries
Li, J., Liu, S., Cui, Y., Zhang, S., Wu, X., Xiang, J., Li, M., Wang, X., Xia, X., Gu, C., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17406 · Cited by 40
From Bulk to Nanosheet: How Tellurene Can Influence the Performance of Li‐S Batteries on Both Electrodes
Han, B., Cao, X.-R., Liu, X.-F., Chen, K., Xiao, L.-P., Xu, Q.-C., Wu, S.-Q., & Xu, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202415782 · Cited by 34
Polyurethane/LLZTO solid electrolyte with excellent mechanical strength and electrochemical property for Advanced lithium metal battery
Gao, Y.-Q., Wang, C.-L., Wang, H.-R., Feng, C.-H., Pan, H.-W., Zhang, Z.-P., He, J., & Wang, Q.-F. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145446 · Cited by 34
Transition metals for stabilizing lithium metal anode: advances and perspectives
Miao, S.-Z., Jia, Y., Deng, Z., Deng, Y., Chen, R.-Y., Zhang, X.-M., Xu, C., Yao, M., & Cai, W.-L. (2023) · Tungsten · doi:10.1007/s42864-023-00231-3 · Cited by 34
Self-citation
In-Situ Formation of LiF-Rich Solid-Electrolyte Interphases on 3D Lithiophilic Skeleton for Stable Lithium Metal Anode
Huang, K., Song, S.-P., Xue, Z., Niu, X., Peng, X.-L., & Xiang, Y. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.12.003 · Cited by 34
NaF-rich interphase and high initial coulombic efficiency of red phosphorus anode for sodium-ion batteries by chemical presodiation.
Song, J., Wu, M., Fang, K., Tian, T., Wang, R., & Tang, H.-L. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.08.096 · Cited by 34
Interfacial engineering on metal anodes in rechargeable batteries
Wei, C.-L., Tan, L.-W., Zhang, Y., Wang, Z.-R., Xi, B.-J., Xiong, S., & Feng, J. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100089 · Cited by 34
Constructing a Lithiophilic and Mixed Conductive Interphase Layer in Electrolyte with Dual-Anion Solvation Sheath for Stable Lithium Metal Anode
Zhong, B., Wu, J.-Y., Ren, L.-T., Zhou, T., Zhang, Z., Liu, W., & Zhou, H.-H. (2022) · Social Science Research Network · doi:10.2139/ssrn.4061573 · Cited by 34
Soluble and Perfluorinated Polyelectrolyte for Safe and High-Performance Li-O2 Batteries.
Xiong, Q., Huang, G., Yu, Y., Li, C., Li, J., Yan, J.-M., & Zhang, X.-B. (2022) · Angewandte Chemie · doi:10.1002/anie.202116635 · Cited by 34
Self-citation
Strategies for Dendrite-Free lithium metal Anodes: A Mini-review
Rao, X.-F., Lou, Y., Zhong, S.-W., Wang, L., Li, B., Xiao, Y., Peng, W., Zhong, X., & Huang, J. (2021) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2021.115499 · Cited by 34
Recent progress in the carbon-based frameworks for high specific capacity anodes/cathode in lithium/sodium ion batteries
Li, X., Wang, X., & Sun, J. (2021) · doi:10.1016/s1872-5805(21)60008-2 · Cited by 34
Insight into uniform filming of LiF‐rich interphase via synergistic adsorption for high‐performance lithium metal anode
He, Y., Wang, L., Wang, A., Zhang, B., Pham, H., Park, J., & He, X. (2023) · Exploration · doi:10.1002/exp.20230114 · Cited by 43
High–performance lithium metal batteries enabled by a nano–sized garnet solid–state electrolyte modified separator
Yu, K., Zeng, H.-P., Ma, J., Jiang, Y.-D., Li, H., Zhang, L.-D., Zhang, Q., Shan, X., Li, T., Wu, X., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.148038 · Cited by 33
Self-citation
Impact of Surface Structure on SEI for Carbon Materials in Alkali Ion Batteries: A Review
Zhao, X.-S., Chen, Y., Sun, H.-R., Yuan, T., Gong, Y.-Y., Liu, X.-J., & Chen, T.-Q. (2023) · Batteries · doi:10.3390/batteries9040226 · Cited by 33
Nonflammable Localized High-Concentration Electrolytes with Long-Term Cycling Stability for High-Performance Li Metal Batteries.
Xu, Z.-L., Deng, K.-R., Zhou, S.-P., Liu, Z., Guan, X.-C., & Mo, D. (2022) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.2c13922 · Cited by 33
2,2,2-Trifluoroethyl trifluoroacetate as effective electrolyte additive for uniform Li deposition in lithium metal batteries
Yang, S., Hao, M., Wang, Z., Xie, Z., Cai, Z., Hu, M., Chen, B., Wang, L., & Zhou, K. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134897 · Cited by 34
Stable Li-Metal Batteries Enabled by in Situ Gelation of an Electrolyte and In-Built Fluorinated Solid Electrolyte Interface.
Jiao, X., Wang, J., Gao, G., Zhang, X., Fu, C., Wang, L.-N., Wang, Y., & Liu, T.-X. (2021) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.1c19663 · Cited by 33
Self-citation
trans-Difluoroethylene Carbonate as an Electrolyte Additive for Microsized SiOx@C Anodes.
Huang, L.-B., Li, G., Lu, Z.-Y., Li, J.-Y., Zhao, L., Zhang, Y., Zhang, X.-D., Jiang, K.-C., Xu, Q., & Guo, Y.-G. (2021) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.1c05379 · Cited by 33
Self-citation
A 3D conducting scaffold with in-situ grown lithiophilic Ni2P nanoarrays for high stability lithium metal anodes
Jiang, H., Fan, H., Han, Z., Hong, B., Wu, F., Zhang, K., Zhang, Z., Fang, J., & Lai, Y. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.06.004 · Cited by 42
Rationally optimized carbon fiber cloth as lithiophilic host for highly stable Li metal anodes
Cao, J., Xie, Y., Li, W., Wang, X., Yang, Y., Zhang, Q., Guo, J., Yang, C., Cheng, S., Zhang, C., et al. (2021) · doi:10.1016/j.mtener.2021.100663 · Cited by 33
Self-citation
Dendrite-Free lithium electrode enabled by graphene aerogels with gradient porosity
Huang, W., Yu, Y.-K., Hou, Z., Liang, Z., Zheng, Y., Quan, Z., & Lu, Y.-C. (2020) · doi:10.1016/j.ensm.2020.08.032 · Cited by 33
Stability, Elastic Properties, and the Li Transport Mechanism of the Protonated and Fluorinated Antiperovskite Lithium Conductors
Effat, M. B., Liu, J., Lu, Z., Wan, T. H., Curcio, A., & Francesco Ciucci, A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17975 · Cited by 44
Roadmap on Electrolytes for Lithium- and Sodium-Metal Batteries.
Xu, C.-X., Yang, Y.-L., Wang, H.-P., Xu, B., Li, Y., Tan, R., Duan, X., Wu, D.-X., Zhuo, M., & Ma, J.-M. (2020) · Chemistry - An Asian Journal · doi:10.1002/asia.202000851 · Cited by 33
Polymer–Inorganic Nanocomposite Coating with High Ionic Conductivity and Transference Number for a Stable Lithium Metal Anode
Fu, C., & Battaglia, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13485 · Cited by 42
Highly conductive and nonflammable composite polymer electrolytes for rechargeable quasi-solid-state Li-metal batteries
Dai, Z., Yu, J., Liu, J.-P., Liu, R., Sun, Q., Chen, D.-J., & Ciucci, F. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228182 · Cited by 33
Metal–organic framework-induced mesoporous carbon nanofibers as an ultrastable Na metal anode host
Mubarak, N., Ihsan-Ul-Haq, M., Huang, H., Cui, J., Yao, S.-S., Susca, A., Wu, J.-X., Wang, M.-Y., Zhang, X.-H., Huang, B.-L., et al. (2020) · doi:10.1039/d0ta00359j · Cited by 33
Self-citation
Fluorinated Nonflammable In Situ Gel Polymer Electrolyte for High-Voltage Lithium Metal Batteries.
Wang, F.-H., Zhong, J., Guo, Y., Han, Q.-G., Liu, H., Du, J.-Q., Tian, J., Tang, S., & Cao, Y.-C. (2023) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.3c05840 · Cited by 32
The Inducement and “Rejuvenation” of Li Dendrites by Space Confinement and Positive Fe/Co‐Sites
Liu, Z., Dong, X., Wen, J., Hu, P., & Shang, C. (2023) · Small · doi:10.1002/smll.202300106 · Cited by 28
Quantifying the Evolution of Inactive Li/Lithium Hydride and Their Correlations in Rechargeable Anode-free Li Batteries.
Tao, M., Xiang, Y., Zhao, D.-H., Shan, P., Sun, Y.-O., & Yang, Y. (2022) · Nano letters (Print) · doi:10.1021/acs.nanolett.2c02484 · Cited by 32
Stabilization effect of solid-electrolyte interphase by electrolyte engineering for advanced Li-ion batteries
Bintang, H. M., Lee, S., Shin, S., Kim, B. G., Jung, H.-G., Whang, D., & Lim, H.-D. (2021) · doi:10.1016/j.cej.2021.130524 · Cited by 32
A Highly Reversible Lithium Metal Anode by Constructing Lithiophilic Bi-Nanosheets.
Liu, X., Xu, P., Zhang, J., Hu, X.-Y., Hou, Q., Lin, X.-D., Zheng, M., & Dong, Q.-F. (2021) · Small · doi:10.1002/smll.202102016 · Cited by 32
Regulating lithium deposition via electropolymerization of acrylonitrile in rechargeable lithium metal batteries
Zhang, J., Zhou, M., Shi, J.-Y., Zhao, Y., Wen, X.-Y., Su, C.-C., Wu, J., & Guo, J.-C. (2021) · doi:10.1016/j.nanoen.2021.106298 · Cited by 32
Organic-Inorganic Hybrid SEI Induced by a New Lithium Salt for High-Performance Metallic Lithium Anodes.
Guo, L.-Y., Huang, F., Cai, M., Zhang, J.-J., Ma, G., & Xu, S.-Q. (2021) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.1c04788 · Cited by 32
A closed-host bi-layer dense/porous solid electrolyte interphase for enhanced lithium-metal anode stability
Efaw, C. M., Lu, B.-Y., Lin, Y.-X., Pawar, G., Chinnam, P., Hurley, M., Dufek, E. J., Meng, Y., & Li, B. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.018 · Cited by 32
Bifunctional In Situ Polymerized Interface for Stable LAGP‐Based Lithium Metal Batteries
Zhang, S., Zeng, Z., Zhai, W., Hou, G., Chen, L.-N., & Ci, L. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202100072 · Cited by 32
Advanced Li-Se S battery system: Electrodes and electrolytes
Du, H., Feng, S., Luo, W., Zhou, L., & Mai, L. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.01.001 · Cited by 38
MOF-derived lithiophilic CuO nanorod arrays for stable lithium metal anodes.
Wei, L., Li, L., Zhao, T., Zhang, N., Zhao, Y.-Y., Wu, F., & Chen, R.-J. (2020) · Nanoscale · doi:10.1039/d0nr01091j · Cited by 32
In Situ Forming Gel Polymer Electrolyte for High Energy-Density Lithium Metal Batteries.
Xue, J., Liu, F.-Q., Xiang, T.-Q., Jia, S.-X., Zhou, J.-J., & Li, L. (2023) · Small · doi:10.1002/smll.202307553 · Cited by 31
Interfacial Fluoride Engineering Enabled Robust LiF-Rich Solid Electrolyte Interphase to Reduce Active Lithium Loss in Rechargeable Lithium Battery
Jia, T., Zhong, G., Lu, S.-R., Ren, X.-L., Lv, Y., Li, N., Yin, R., Kang, G., Cai, K.-S., Kang, F.-Y., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140397 · Cited by 31
Low concentration electrolyte with non-solvating cosolvent enabling high-voltage lithium metal batteries
Jiang, Z.-P., Zeng, Z.-Q., Zhang, H., Yang, L., Hu, W., Liang, X., Feng, J.-W., Yu, C., Cheng, S., & Xie, J. (2021) · iScience · doi:10.1016/j.isci.2021.103490 · Cited by 31
“Typically, various high-efficiency additives ware added to the conventional carbonate electrolytes with a Li salt concentration of 1 M, such as fluoroethylene carbonate (FEC), LiNO3, and nitro-C60 (Zhang et al., 2017; Jiang et al., 2019, 2020a).”
Background
Enhancing the Cycling Stability for Lithium-Metal Batteries by Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive
Wu, Q., Tang, X., Qian, Y., Duan, J., Wang, R., Teng, J.-H., & Li, J. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02115 · Cited by 31
Bio-inspired lotus root-like 3D multichannel carbon hosts for stable lithium metal anodes
Yu, L., Su, Q.-M., Li, B.-Y., Liu, W., Zhang, M., Ding, S.-K., Du, G.-H., & Xu, B.-S. (2020) · doi:10.1016/j.electacta.2020.137130 · Cited by 31
A Micelle Electrolyte Enabled by Fluorinated Ether Additives for Polysulfide Suppression and Li Metal Stabilization in Li-S Battery
Zhao, Y., Chen, F., Zhang, G., Hubble, D., Nallapaneni, A., Zhu, C., Zhao, Z., Liu, Z., Lau, J., Fu, Y., et al. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00484 · Cited by 37
Advanced Design and Characterization of Polyether‐Based Solid‐State Electrolytes for High‐Energy‐Density Lithium Batteries
Hou, J.-Z., Zhang, J.-P., Wu, S., Liu, X.-Y., Li, Y.-X., Yan, Z.-H., Zhang, K., Lu, Y., & Chen, J. (2025) · Advances in Materials · doi:10.1002/adma.202515430 · Cited by 30
Exploring the Role of an Electrolyte Additive in Suppressing Surface Reconstruction of a Ni-Rich NMC Cathode at Ultrahigh Voltage via Enhanced In Situ and Operando Characterization Methods
Dai, H.-D., Gomes, L., Maxwell, D. S., Zamani, S., Yang, K., Atienza, D., Dale, N., & Mukerjee, S. (2024) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.3c15670 · Cited by 30
Proximity Matters: Interfacial Solvation Dictates Solid Electrolyte Interphase Composition.
Oyakhire, S., Liao, S.-L., Shuchi, S. B., Kim, M. S., Kim, S. C., Yu, Z., Vilá, R. A., Rudnicki, P. E., Cui, Y., & Bent, S. (2023) · Nano letters (Print) · doi:10.1021/acs.nanolett.3c02037 · Cited by 30
Synthesizing an inorganic-rich solid electrolyte interphase by tailoring solvent chemistry in carbonate electrolyte for enabling high-voltage lithium metal batteries
Ran, Q.-W., Zhao, H.-Y., Liu, J.-T., Li, L., Hu, Q., Nie, F., Liu, X.-Q., & Kormarneni, S. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.03.009 · Cited by 30

Authors: Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q.
Affiliations: Tsinghua University (CN)
Corresponding author: Zhang, Qiang
ORCID: Zhang, Xue‐Qiang
Cheng, Xin‐Bing
Chen, Xiang
Yan, Chong
Zhang, Qiang
Venue: Advanced Functional Materials
Publisher: Wiley
Published: 2017-01-20
Volume: 27
Issue: 10
ISSN: 1616-301X (ISSN-L)
1616-3028
DOI: 10.1002/adfm.201605989
OpenAlex: W2579562509
Cited by: 1,699
References: 0
Citations by year: 2026: 81 · 2025: 135 · 2024: 161 · 2023: 203 · 2022: 230 · 2021: 228 · 2020: 242 · 2019: 231 · 2018: 130 · 2017: 58
FWCI: 75.16
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Functional Materials (publishedVersion)
Funders: National Key Research and Development Program (2016YFA0202500)
Natural Scientific Foundation of China (21422604, 21676160, 21561130151)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords: lithium metal batteries, fluoroethylene carbonate, electrolyte additives, lithium dendrite suppression, solid electrolyte interphase, LiF-rich SEI, lithium deposition uniformity, lithium metal anode, NCM cathode, Coulombic efficiency, high energy density

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Metadata

Record

About these checks