Cited by 1,699Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsBattery Modeling and Management

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Zhang, Xue‐Qiang, Cheng, Xin‐Bing, Chen, Xiang, Yan, Chong, Zhang, Qiang·2017·Advanced Functional Materials

DOI 10.1002/adfm.201605989

Open this paper in CoChat — free account

Abstract

Lithium (Li) metal has been considered as an important substitute for the graphite anode to further boost the energy density of Li‐ion batteries. However, Li dendrite growth during Li plating/stripping causes safety concern and poor lifespan of Li metal batteries (LMB). Herein, fluoroethylene carbonate (FEC) additives are used to form a LiF‐rich solid electrolyte interphase (SEI). The FEC‐induced SEI layer is compact and stable, and thus beneficial to obtain a uniform morphology of Li deposits. This uniform and dendrite‐free morphology renders a significantly improved Coulombic efficiency of 98% within 100 cycles in a Li | Cu half‐cell. When the FEC‐protected Li metal anode matches a high‐loading LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NMC) cathode (12 mg cm −2 ), a high initial capacity of 154 mAh g −1 (1.9 mAh cm −2 ) at 180.0 mA g −1 is obtained. This LMB with conversion‐type Li metal anode and intercalation‐type NMC cathode affords an emerging energy storage system to probe the energy chemistry of Li metal protection and demonstrates the material engineering of batteries with very high energy density.

Integrity signals

Registry

Crossref · 10.1002/adfm.201605989

Cites

0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Density-functional thermochemistry. III. The role of exact exchange
Becke, A. D. (1993) · The Journal of Chemical Physics · doi:10.1063/1.464913 · Cited by 103,767
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation
Michan, A. L., Parimalam, B. S., Leskes, M., Kerber, R. N., Yoon, T., Grey, C. P., & Lucht, B. L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02282 · Cited by 541

Flagged first, then by citations

Show all 0 references

Research works printed but not linked: 75

10.1038/35104644 · DOI
10.1126/science.1212741 · DOI · Paper page
10.1038/nenergy.2016.114 · DOI
10.1021/acs.jpclett.6b00080 · DOI
10.1038/nenergy.2016.71 · DOI
10.1039/C3EE40795K · DOI
10.1002/advs.201500213 · DOI
10.1016/S0378-7753(01)00734-0 · DOI
10.1021/acs.accounts.5b00427 · DOI
10.1002/adma.201506124 · DOI
10.1002/adma.201504117 · DOI
10.1038/ncomms9058 · DOI
10.1002/adma.201504526 · DOI
10.1149/2.0151605jes · DOI
10.1021/cr030203g · DOI
10.1039/c4cs00020j · DOI
10.1149/2.0041514jes · DOI
10.1016/S0167-2738(02)00080-2 · DOI
10.1002/advs.201600168 · DOI
10.1016/j.electacta.2003.09.010 · DOI
10.1016/j.elecom.2014.12.008 · DOI
10.1149/2.0011507jes · DOI
10.1002/adma.201501490 · DOI
10.1149/1.3148721 · DOI
10.1016/j.jpowsour.2016.05.009 · DOI
10.1021/ja312241y · DOI
10.1016/j.jpowsour.2016.07.056 · DOI
10.1038/ncomms8436 · DOI
10.1016/j.ensm.2016.01.007 · DOI
10.1016/j.jpowsour.2015.01.030 · DOI
10.1038/nmat4041 · DOI
10.1002/aenm.201501933 · DOI
10.1038/ncomms2513 · DOI
10.1002/adma.201405115 · DOI
10.1016/j.ensm.2015.09.008 · DOI
10.1002/aenm.201402273 · DOI
10.1002/aenm.201500117 · DOI
10.1002/adma.201501490 · DOI
10.1002/aenm.201501010 · DOI
10.1002/aenm.201400993 · DOI
10.1002/aenm.201502151 · DOI
10.1039/C6EE00123H · DOI
10.1149/2.001404jes · DOI
10.1021/la203712s · DOI
10.1021/acs.chemmater.5b00339 · DOI
10.1021/la501368y · DOI
10.1016/j.electacta.2015.04.030 · DOI
10.1103/PhysRevB.91.134116 · DOI
10.1016/j.jpowsour.2015.09.055 · DOI
10.1016/j.jpowsour.2016.04.017 · DOI
10.1021/acsnano.5b01990 · DOI
10.1088/0965-0393/21/7/074005 · DOI
10.1149/2.0021513jes · DOI
10.1002/admi.201600438 · DOI
10.1002/cssc.201300770 · DOI
10.1021/am200973k · DOI
10.1002/aenm.201502185 · DOI
10.1002/advs.201600013 · DOI
10.1002/adma.201400794 · DOI
10.1016/j.jpowsour.2013.12.099 · DOI
10.1002/advs.201600066 · DOI
10.1002/admi.201600172 · DOI
10.1021/acs.jpcc.5b03591 · DOI
10.1021/am508593s · DOI
10.1002/smll.201401521 · DOI
10.1149/1.1836979 · DOI
10.1016/j.jpowsour.2006.07.074 · DOI
10.1149/2.100310jes · DOI
10.1002/aelm.201500246 · DOI
10.1063/1.458452 · DOI
10.1063/1.1316015 · DOI
10.1524/zkri.220.5.567.65075 · DOI
10.1002/adma.201501082 · DOI
10.1002/(SICI)1096-987X(199806)19:8<935::AID-JCC12>3.0.CO;2-6 · DOI
10.1080/00268970110089108 · DOI

Sorted by citations

Items 101–200 of 1,002

Molecular Engineering Approaches to Fabricate Artificial Solid‐Electrolyte Interphases on Anodes for Li‐Ion Batteries: A Critical Review
Fedorov, R. G., Maletti, S., Heubner, C., Michaelis, A., & Ein‐Eli, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101173 · Cited by 138
Boosting the Optimization of Lithium Metal Batteries by Molecular Dynamics Simulations: A Perspective
Sun, Y., Yang, T.-Z., Ji, H., Zhou, J.-Q., Wang, Z.-K., Qian, T., & Yan, C.-L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002373 · Cited by 106
Self-citation
Low Concentration Electrolyte Enabling Cryogenic Lithium–Sulfur Batteries
Chu, F., Wang, M., Liu, J., Guan, Z., Yu, H., Liu, B., & Wu, F. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205393 · Cited by 131
Unravelling the Mechanism of Lithium Nucleation and Growth and the Interaction with the Solid Electrolyte Interface
Dong, K., Xu, Y.-L., Tan, J.-W., Osenberg, M., Sun, F., Kochovski, Z., Pham, D. T., Mei, S.-L., Hilger, A., Ryan, E. M., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00551 · Cited by 103
Realizing dendrite-free lithium deposition with three-dimensional soft-rigid nanofiber interlayers.
Zhao, H.-J., Zhao, G.-D., Liu, F.-Q., Xiang, T.-Q., Zhou, J.-J., & Li, L. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.04.029 · Cited by 102
Redistributing Li‐Ion Flux by Parallelly Aligned Holey Nanosheets for Dendrite‐Free Li Metal Anodes
Zhou, Y.-G., Zhang, X., Ding, Y., Bae, J., Guo, X.-L., Zhao, Y., & Yu, G.-H. (2020) · Advances in Materials · doi:10.1002/adma.202003920 · Cited by 102
Self-citation
Hydrofluoric Acid‐Removable Additive Optimizing Electrode Electrolyte Interphases with Li+ Conductive Moieties for 4.5 V Lithium Metal Batteries
Jiang, G.-X., Liu, J.-D., He, J., Wang, H.-P., Qi, S.-H., Huang, J., Wu, D.-X., & Ma, J. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214422 · Cited by 100
Porous Metal Current Collectors for Alkali Metal Batteries
Chen, J.-Y., Wang, Y.-Z., Li, S.-J., Chen, H.-R., Qiao, X., Zhao, J., Ma, Y.-W., & Alshareef, H. (2022) · Advancement of science · doi:10.1002/advs.202205695 · Cited by 98
Marrying Ester Group with Lithium Salt: Cellulose‐Acetate‐Enabled LiF‐Enriched Interface for Stable Lithium Metal Anodes
Chen, M., Zheng, J., Liu, Y., Sheng, O., Ju, Z., Lu, G., Liu, T.-F., Wang, Y., Nai, J., Wang, Q., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102228 · Cited by 98
Anionic Coordination Manipulation of Multilayer Solvation Structure Electrolyte for High‐Rate and Low‐Temperature Lithium Metal Battery
Sun, N., Li, R., Zhao, Y., Zhang, H., Chen, J., Xu, J., Li, Z., Fan, X., Yao, X., & Peng, Z. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200621 · Cited by 117
Inhibiting intercrystalline reactions of anode with electrolytes for long-cycling lithium batteries
Shi, P., Fu, Z., Zhou, M., Chen, X., Yao, N., Hou, L., Zhao, C., Li, B., Huang, J., Zhang, X., et al. (2022) · Science Advances · doi:10.1126/sciadv.abq3445 · Cited by 117
Self-citation
In situ constructing lithiophilic NiFx nanosheets on Ni foam current collector for stable lithium metal anode via a succinct fluorination strategy
Huang, G.-X., Chen, S., Guo, P.-M., Tao, R.-M., Jie, K.-C., Liu, B., Zhang, X., Liang, J.-Y., & Cao, Y.-C. (2020) · doi:10.1016/j.cej.2020.125122 · Cited by 94
Self-citation
Sandwich structured NASICON-type electrolyte matched with sulfurized polyacrylonitrile cathode for high performance solid-state lithium-sulfur batteries
Wang, Y., Wang, G.-X., He, P., Hu, J.-K., Jiang, J.-H., & Fan, L.-Z. (2020) · doi:10.1016/j.cej.2020.124705 · Cited by 94
Constructing inorganic-rich solid electrolyte interphase via abundant anionic solvation sheath in commercial carbonate electrolytes
Fang, W., Wen, Z., Chen, L., Qin, Z., Li, J., Zheng, Z., Weng, Z., Wu, G., Zhang, N., Liu, X., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107881 · Cited by 124
Crossover Effects in Batteries with High‐Nickel Cathodes and Lithium‐Metal Anodes
Langdon, J. T., & Manthiram, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010267 · Cited by 113
Unraveling the Mechanisms of Lithium Metal Plating/Stripping via In Situ/Operando Analytical Techniques
Um, J. H., & Yu, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003004 · Cited by 101
Suppressing Local Dendrite Hotspots via Current Density Redistribution Using a Superlithiophilic Membrane for Stable Lithium Metal Anode
Hu, Y.-F., Li, Z., Wang, Z.-P., Wang, X.-L., Chen, W., Wang, J., Zhong, W.-W., & Ma, R.-G. (2023) · Advancement of science · doi:10.1002/advs.202206995 · Cited by 91
Chlorinated dual-protective layers as interfacial stabilizer for dendrite-free lithium metal anode
Zhang, K.-W., Wu, F., Zhang, K.-F., Weng, S., Wang, X.-R., Gao, M., Sun, Y.-H., Cao, D., Bai, Y., Xu, H.-J., et al. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.06.023 · Cited by 90
Stabilizing Solid Electrolyte Interphases on Both Anode and Cathode for High Areal Capacity, High‐Voltage Lithium Metal Batteries with High Li Utilization and Lean Electrolyte
Ma, Q.-T., Zhang, X., Wang, A.-X., Xia, Y.-Y., Liu, X.-J., & Luo, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002824 · Cited by 90
Self-citation
Recent progress and perspective on lithium metal battery with nickel-rich layered oxide cathode
Zhang, H., Zeng, Z.-Q., Cheng, S.-J., & Xie, J. (2024) · eScience · doi:10.1016/j.esci.2024.100265 · Cited by 88
Ion–solvent chemistry in lithium battery electrolytes: From mono-solvent to multi-solvent complexes
Chen, X., Yao, N., Zeng, B.-S., & Zhang, Q. (2021) · Fundamental Research · doi:10.1016/j.fmre.2021.06.011 · Cited by 119
Self-citation
Dendrite-free lithium metal solid battery with a novel polyester based triblock copolymer solid-state electrolyte
Zhang, B., Liu, Y., Pan, X., Liu, J., Doyle‐Davis, K., Sun, L., Liu, J., Jiao, X., Jie, J., Xie, H., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104690 · Cited by 107
Low-temperature and high-voltage lithium-ion battery enabled by localized high-concentration carboxylate electrolytes
Feng, T., Yang, G., Zhang, S., Xu, Z., Zhou, H., & Wu, M. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134138 · Cited by 88
Structural Design and Challenges of Micron‐Scale Silicon‐Based Lithium‐ion Batteries
He, W., Xu, W., Li, Z.-G., Hu, Z.-T., Yang, J., Qin, G., Teng, W.-M., Zhang, T.-F., Zhang, W., Sun, Z.-M., et al. (2025) · Advancement of science · doi:10.1002/advs.202407540 · Cited by 87
Approaching Microsized Alloy Anodes via Solid Electrolyte Interphase Design for Advanced Rechargeable Batteries
Tian, Y., An, Y., & Zhang, B. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300123 · Cited by 75
A polymer brush-based robust and flexible single-ion conducting artificial SEI film for fast charging lithium metal batteries
Zeng, J., Liu, Q.-T., Jia, D., Liu, R.-L., Liu, S.-H., Zheng, B.-N., Zhu, Y., Fu, R., & Wu, D.-C. (2021) · doi:10.1016/j.ensm.2021.07.002 · Cited by 87
Inducing uniform lithium nucleation by integrated lithium-rich li-in anode with lithiophilic 3D framework
Liu, S.-S., Ma, Y.-L., Zhou, Z.-X., Lou, S., Huo, H., Zuo, P.-J., Wang, J.-J., Du, C.-Y., Yin, G., & Gao, Y.-Z. (2020) · doi:10.1016/j.ensm.2020.08.007 · Cited by 87
Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions
Parikh, D., Christensen, T., & Li, J.-L. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228601 · Cited by 87
Ionic Liquid Electrolytes for Next-generation Electrochemical Energy Devices
Zheng, Y., Wang, D., Kaushik, S., Zhang, S., Wada, T., Hwang, J., Matsumoto, K., & Hagiwara, R. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100075 · Cited by 95
Practical 4.4 V Li||NCM811 Batteries Enabled by A Thermal Stable and HF Free Carbonate-based Electrolyte
Zhang, L.-H., Min, F.-Q., Luo, Y., Dang, G., Gu, H.-T., Dong, Q., Zhang, M., Sheng, L.-M., Shen, Y.-B., Chen, L.-W., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107122 · Cited by 86
A LiFSI and LiDFBOP Dual-Salt Electrolyte Reinforces the Solid Electrolyte Interphase on Lithium Metal Anode.
Liu, S., Zhang, Q., Wang, X.-S., Xu, M.-Q., Li, W.-S., & Lucht, B. (2020) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.0c08094 · Cited by 86
Self-citation
A Soft Lithiophilic Graphene Aerogel for Stable Lithium Metal Anode
Yang, T.-Y., Li, L., Wu, F., & Chen, R.-J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002013 · Cited by 86
Dendrite‐Free Lithium Metal Batteries Enabled by Coordination Chemistry in Polymer‐Ceramic Modified Separators
Tang, W.-M., Zhao, T., Wang, K., Yu, T.-Y., Lv, R.-X., Li, L., Wu, F., & Chen, R.-J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314045 · Cited by 85
Highly safe and cyclable Li-metal batteries with vinylethylene carbonate electrolyte
Zhang, Q., Liu, C., Lin, Z., Wang, K., Chen, M., Xu, K., & Li, W. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104860 · Cited by 101
Self-citation
Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte
Gu, S., Zhang, S.-W., Han, J., Deng, Y.-Q., Luo, C., Zhou, G.-M., He, Y., Wei, G.-D., Kang, F.-Y., Lv, W., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102128 · Cited by 82
In-Situ synthesized Non-flammable gel polymer electrolyte enable highly safe and Dendrite-Free lithium metal batteries
Wang, S.-S., Zhou, L., Tufail, M., Yang, L., Zhai, P.-F., Chen, R.-J., & Yang, W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128846 · Cited by 82
2-Fluoropyridine: A novel electrolyte additive for lithium metal batteries with high areal capacity as well as high cycling stability
Xie, Z., Wu, Z., An, X., Yue, X., Yoshida, A., Du, X. L., Hao, X., Abudula, A., & Guan, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124789 · Cited by 95
A Lithium-Metal Anode with Ultra-High Areal Capacity (50 mAh cm−2) by Gridding Lithium Plating/Stripping
Xu, P., Hu, X.-Y., Liu, X., Lin, X.-D., Fan, X.-X., Cui, X.-Y., Sun, C., Wu, Q.-H., Lian, X., Yuan, R.-M., et al. (2021) · doi:10.1016/j.ensm.2021.03.010 · Cited by 80
Evaluating Solid-Electrolyte Interphases for Lithium and Lithium-free Anodes from Nanoindentation Features
Wang, W., Gu, Y., Yan, H., Li, S., He, J., Xu, H., Wu, Q., Yan, J.-W., & Mao, B.-W. (2020) · Chem · doi:10.1016/j.chempr.2020.07.014 · Cited by 80
In Situ/Operando Imaging Techniques for Next-Generation Battery Analysis
Cho, B.-K., Jung, S.-Y., Park, S.-J., Hyun, J., & Yu, S.-H. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c01098 · Cited by 79
Electrical resistance of the current collector controls lithium morphology
Oyakhire, S., Zhang, W.-B., Shin, A., Xu, R., Boyle, D. T., Yu, Z., Ye, Y., Yang, Y., Raiford, J. A., Huang, W., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31507-w · Cited by 79
Revealing the Role of Fluoride‐Rich Battery Electrode Interphases by Operando Transmission Electron Microscopy
Chen, G., Pu, S. D., Gao, X., Yang, S., Liu, J., Ning, Z., Rees, G. J., Capone, I., Pi, L., Liu, B., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003118 · Cited by 101
Towards high-performance lithium metal anodes via the modification of solid electrolyte interphases
Hou, Z. X., Zhang, J., Wang, W., Chen, Q., Li, B., & Li, C. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.09.028 · Cited by 103
Realizing Solid‐Phase Reaction in Li–S Batteries via Localized High‐Concentration Carbonate Electrolyte
He, M., Li, X., Yang, X.-F., Wang, C.-H., Zheng, M., Li, R.-Y., Zuo, P.-J., Yin, G., & Sun, X. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101004 · Cited by 78
A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode
Cui, Y.-L., Liu, S.-F., Wang, D., Wang, X.-L., Xia, X., Gu, C.-D., & Tu, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006380 · Cited by 78
Progress on Lithium Dendrite Suppression Strategies from the Interior to Exterior by Hierarchical Structure Designs.
Shen, L., Shi, P.-R., Hao, X., Zhao, Q., Ma, J., He, Y., & Kang, F.-Y. (2020) · Small · doi:10.1002/smll.202000699 · Cited by 78
Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage
Qiu, Z., Shen, S., Liu, P., Li, C., Zhong, Y., Su, H., Xu, X.-E., Zhang, Y., Cao, F., Noori, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214987 · Cited by 77
Synergistical Stabilization of Li Metal Anodes and LiCoO2 Cathodes in High-Voltage Li∥LiCoO2 Batteries by Potassium Selenocyanate (KSeCN) Additive
Fu, A., Lin, J.-D., Zhang, Z.-F., Xu, C.-J., Zou, Y., Liu, C., Yan, P., Wu, D.-Y., Yang, Y., & Zheng, J.-M. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00316 · Cited by 77
A review on the use of carbonate-based electrolytes in Li-S batteries: A comprehensive approach enabling solid-solid direct conversion reaction
Rafie, A., Kim, J. W., Sarode, K. K., & Kalra, V. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.03.015 · Cited by 87
N,S-codoped carbon dots as deposition regulating electrolyte additive for stable lithium metal anode
Li, S., Luo, Z., Tu, H.-Y., Zhang, H., Deng, W.-N., Zou, G.-Q., Hou, H.-S., & Ji, X.-B. (2021) · doi:10.1016/j.ensm.2021.08.008 · Cited by 77
Designed high-performance lithium-ion battery electrodes using a novel hybrid model-data driven approach
Gao, X., Liu, X., He, R., Wang, M., Xie, W., Brandon, N. P., Wu, B., Ling, H., & Yang, S. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.01.007 · Cited by 93
Li‐containing alloys beneficial for stabilizing lithium anode: A review
Gu, X.-X., Dong, J.-X., & Lai, C. (2020) · Engineering Reports · doi:10.1002/eng2.12339 · Cited by 77
“In the aspect of electrolyte, increasing the concentrations of lithium salts and adding inorganic or organic additives in electrolyte could not only benefit to stabilize the spontaneous solid electrolyte interphase (SEI) films to reduce the side reactions happening, but also control the nucleation and growth of metall…”
Background
1,3,5-Trifluorobenzene and fluorobenzene co-assisted electrolyte with thermodynamic and interfacial stabilities for high-voltage lithium metal battery
Zhang, H., Zeng, Z.-Q., He, R., Wu, Y., Hu, W., Lei, S., Liu, M., Cheng, S.-J., & Xie, J. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.03.034 · Cited by 75
Electrolytes, Additives and Binders for NMC Cathodes in Li-Ion Batteries—A Review
Das, D. D., Manna, S., & Puravankara, S. (2023) · Batteries · doi:10.3390/batteries9040193 · Cited by 74
“A ﬂuorinated additive such as FEC was studied in a Li metal battery and performed excellently [61].”
BackgroundMethodInfluential
Safe and Stable Lithium Metal Batteries Enabled by an Amide-Based Electrolyte
Wu, W., Bo, Y., Li, D., Liang, Y., Zhang, J., Cao, M., Guo, R., Zhu, Z., Ci, L., Li, M., et al. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00780-7 · Cited by 89
“The signals of C–Fx (688.7 eV) are further confirmed from F 1s spectra, and the other peak can be assigned to LiF (685.0 eV), which indicates the preferred reduction of FEC [60].”
BackgroundInfluential
Fluorinated Poly‐oxalate Electrolytes Stabilizing both Anode and Cathode Interfaces for All‐Solid‐State Li/NMC811 Batteries
Sun, H., Xie, X., Huang, Q., Wang, Z., Chen, K., Li, X., Gao, J., Li, Y., Li, H., Qiu, J., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202107667 · Cited by 95
Rapid Interfacial Exchange of Li Ions Dictates High Coulombic Efficiency in Li Metal Anodes
May, R., Fritzsching, K. J., Livitz, D., Denny, S. R., & Marbella, L. E. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00112 · Cited by 93
Stable cycling of high-voltage lithium metal batteries enabled by high concentration FEC-based electrolyte.
Wang, W., Zhang, J.-L., Yang, Q., Wang, S., Wang, W., & Li, B.-H. (2020) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.0c03952 · Cited by 74
Electrolyte Additive for Interfacial Engineering of Lithium and Zinc Metal Anodes
Wang, G.-Y., Zhang, Q.-K., Zhang, X.-Q., Lu, J., Pei, C., Min, D., Huang, J.-Q., & Park, H. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202304557 · Cited by 74
Self-citation
Recycled graphite for more sustainable lithium‐ion batteries
Olutogun, M., Vanderbruggen, A., Frey, C., Rudolph, M., Bresser, D., & Passerini, S. (2024) · Carbon Energy · doi:10.1002/cey2.483 · Cited by 73
Modified cathode-electrolyte interphase toward high-performance batteries
Zhang, N., Wang, B., Jin, F., Chen, Y., Jiang, Y.-P., Bao, C., Tian, J.-Y., Wang, J.-Y., Xu, R.-Y., Li, Y., et al. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.101197 · Cited by 73
A novel design of 3D carbon host for stable lithium metal anode
Liu, H., Di, J., Wang, P., Gao, R., Tian, H., Ren, P., Yuan, Q., Huang, W.-X., Liu, R.-P., Liu, Q., et al. (2022) · Carbon Energy · doi:10.1002/cey2.193 · Cited by 73
Thin, flexible sulfide-based electrolyte film and its Interface engineering for high performance solid-state lithium metal batteries
Liu, H., He, P., Wang, G.-X., Liang, Y., Wang, C., & Fan, L.-Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132991 · Cited by 72
Anomalously high elastic modulus of a poly(ethylene oxide)-based composite electrolyte
Yang, G., Lehmann, M. L., Zhao, S., Li, B.-R., Ge, S., Cao, P.-F., Delnick, F., Sokolov, A., Saito, T., & Nanda, J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2020.11.031 · Cited by 72
Nanomaterials for Energy Storage Systems—A Review
Mohammed, H., Mia, M. F., Wiggins, J., & Desai, S. S. (2025) · Molecules · doi:10.3390/molecules30040883 · Cited by 96
Recent advances of ferro‐/piezoelectric polarization effect for dendrite‐free metal anodes
Zhang, H., Wang, P., Yao, C., Chen, S., Cai, K., & Shi, F. (2023) · Rare Metals · doi:10.1007/s12598-023-02319-8 · Cited by 84
“For in situ SEI, strategies focus on the following aspects, such as optimizing solvents, Li salts, and electrolyte additives [96, 113, 114].”
Background
Building lithium metal batteries under lean electrolyte conditions: Challenges and progress
Kwon, H., Baek, J., & Kim, H. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.12.016 · Cited by 88
Strategy for Stable Interface in Lithium Metal Batteries: Free Solvent Derived vs Anion Derived
Park, G., Lee, K., Yoo, D.-J., & Choi, J. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02399 · Cited by 71
In-situ formation of quasi-solid polymer electrolyte for wide-temperature applicable Li-metal batteries
He, Y., Shan, X., Li, Y., Li, Z., Li, L., Zhao, S., Gao, S., Qu, J., Yang, H., & Cao, P. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103281 · Cited by 81
Interrelation Between External Pressure, SEI Structure, and Electrodeposit Morphology in an Anode‐Free Lithium Metal Battery
Liu, W., Luo, Y., Hu, Y., Chen, Z., Wang, Q., Chen, Y.-R., Iqbal, N., & Mitlin, D. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202302261 · Cited by 70
Metal‐organic framework derived porous structures towards lithium rechargeable batteries
Han, S. A., Qutaish, H., Lee, J., Park, M., & Kim, J. H. (2022) · EcoMat · doi:10.1002/eom2.12283 · Cited by 88
Quantifying Graphite Solid-Electrolyte Interphase Chemistry and its Impact on Fast Charging
McShane, E. J., Bergstrom, H., Weddle, P. J., Brown, D. E., Colclasure, A. M., & McCloskey, B. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c01059 · Cited by 70
Lithiophilic MXene‐Guided Lithium Metal Nucleation and Growth Behavior
Son, H., Kim, D., Lim, H.-K., Koo, C., Kim, S. J., & Yun, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101261 · Cited by 70
Grafting polyethyleneimine on electrospun nanofiber separator to stabilize lithium metal anode for lithium sulfur batteries
Hu, M., Ma, Q., Yuan, Y., Pan, Y.-K., Chen, M.-Q., Zhang, Y., & Long, D.-H. (2020) · doi:10.1016/j.cej.2020.124258 · Cited by 70
C–F-rich oil drop as a non-expendable fluid interface modifier with low surface energy to stabilize a Li metal anode
Yang, Q., Hu, J., Meng, J., & Li, C.-L. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03952g · Cited by 69
Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film
Yi, J., Zhou, D., Liang, Y., Liu, H., Ni, H.-F., & Fan, L.-Z. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.09.038 · Cited by 68
Stable Sodium Metal Anode Enabled by an Interface Protection Layer Rich in Organic Sulfide Salt.
Zhu, M., Zhang, Y.-J., Yu, F., Huang, Z., Zhang, Y., Li, L., Wang, G.-Y., Wen, L., Liu, H.-K., Dou, S. X., et al. (2020) · Nano letters (Print) · doi:10.1021/acs.nanolett.0c04158 · Cited by 68
Diluent decomposition-assisted formation of LiF-rich solid-electrolyte interfaces enables high-energy Li-metal batteries
Zhang, J., Zhang, H., Li, R., Lv, L., Lu, D., Zhang, S., Xiao, X., Geng, S., Wang, F., Deng, T., et al. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.11.013 · Cited by 84
Design principles for heterointerfacial alloying kinetics at metallic anodes in rechargeable batteries
Zheng, J., Deng, Y., Li, W.-Z., Yin, J.-F., West, P. J., Tang, T., Tong, X., Bock, D., Jin, S., Zhao, Q., et al. (2022) · Science Advances · doi:10.1126/sciadv.abq6321 · Cited by 67
“A diversity of strategies have been proposed to address these challenges, including electrolyte design (18, 19), electrode architecture design (20, 21), and surface chemistry/interphase design (12, 22).”
Background
A bifunctional ethylene-vinyl acetate copolymer protective layer for dendrites-free lithium metal anodes
Liang, Y.-R., Xiao, Y., Yan, C., Xu, R., Ding, J., Liang, J., Peng, H.-J., Yuan, H., & Huang, J.-Q. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.01.027 · Cited by 67
Self-citation
Lithiophilic V2CTx/MoO3 Hosts with Electronic/Ionic Dual Conductive Gradients for Ultrahigh‐Rate Lithium Metal Anodes
Yao, W., Chen, Z.-W., Zhang, X., Luo, J., Wang, J., He, M., Chen, C., Cheng, X., & Xu, J.-G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202400348 · Cited by 66
Self-citation
Solvation-Protection-Enabled High-Voltage Electrolyte for Lithium Metal Batteries
Su, C.-C., He, M.-N., Cai, M., Shi, J.-Y., Amine, R., Rago, N. D., Guo, J.-C., Rojas, T., Ngo, A., & Amine, K. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106720 · Cited by 66
Interfacial chemistry in anode-free batteries: challenges and strategies
Tong, Z., Bazri, B., Hu, S.-F., & Liu, R.-S. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00419k · Cited by 66
Lithium ion diffusion mechanism on the inorganic components of the solid–electrolyte interphase
Zheng, J., Ju, Z., Zhang, B.-L., Nai, J., Liu, T.-F., Liu, Y., Xie, Q., Zhang, W.-K., Wang, Y., & Tao, X. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11444h · Cited by 66
The origin of sulfuryl-containing components in SEI from sulfate additives for stable cycling of ultrathin lithium metal anodes
Chen, J.-X., Zhang, X.-Q., Li, B.-Q., Wang, X.-M., Shi, P., Zhu, W.-C., Chen, A.-B., Jin, Z.-H., Xiang, R., Huang, J.-Q., et al. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.11.024 · Cited by 66
Self-citation
Modification of Carbonate Electrolytes for Lithium Metal Electrodes
Yeddala, M., Rynearson, L., & Lucht, B. L. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.3c01709 · Cited by 84
Stabilizing the cycling stability of rechargeable lithium metal batteries with tris(hexafluoroisopropyl)phosphate additive
Sun, H., Liu, J., He, J., Wang, H., Jiang, G., Qi, S., & Ma, J. (2022) · 中国科学通报：英文版 · doi:10.1016/j.scib.2022.01.012 · Cited by 93
Gradient SEI layer induced by liquid alloy electrolyte additive for high rate lithium metal battery
Xu, W., Liao, X., Xu, W.-W., Sun, C., Zhao, K.-N., Zhao, Y., & Hu, C. (2021) · doi:10.1016/j.nanoen.2021.106237 · Cited by 65
Engineering cathode-electrolyte interface of graphite to enable ultra long-cycle and high-power dual-ion batteries
Wang, Y., Zhang, Y.-J., Duan, Q., Lee, P., Wang, S., & Yu, D. Y. W. (2020) · doi:10.1016/j.jpowsour.2020.228466 · Cited by 65
Recent progress in constructing halogenated interfaces for highly stable lithium metal anodes
Wang, Y., Liang, J., Song, X., & Jin, Z. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.10.054 · Cited by 70
Quantifying the apparent electron transfer number of electrolyte decomposition reactions in anode-free batteries
Zhou, M.-Y., Ding, X., Ding, J., Hou, L.-P., Shi, P., Xie, J., Li, B.-Q., Huang, J.-Q., Zhang, X.-Q., & Zhang, Q. (2022) · Joule · doi:10.1016/j.joule.2022.07.003 · Cited by 64
Self-citation
Redistributing Li-ion flux and homogenizing Li-metal growth by N-doped hierarchically porous membranes for dendrite-free Lithium metal batteries
Li, X.-C., Chu, Z., Jiang, H., Dai, Y., Zheng, W.-J., Liu, A.-M., Jiang, X.-B., & He, G. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.02.015 · Cited by 64
Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries
Yu, Z., Zhang, J., Wang, C., Hu, R., Du, X., Tang, B., Qu, H.-T., Wu, H., Liu, X., Zhou, X.-H., et al. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.034 · Cited by 64
Low-temperature fusion fabrication of Li-Cu alloy anode with in situ formed 3D framework of inert LiCux nanowires for excellent Li storage performance.
Jia, W.-S., Liu, Y.-C., Wang, Z., Qing, F.-Z., Li, J.-Z., Wang, Y., Xiao, R.-J., Zhou, A., Li, G.-B., Yu, X.-Q., et al. (2020) · Science Bulletin · doi:10.1016/j.scib.2020.07.012 · Cited by 64
Interphase Design for Lithium-Metal Anodes.
Wang, Q.-D., Zhao, C.-L., Wang, S., Wang, J.-L., Wu, F., Ombrini, P., Ganapathy, S., Eustace, S., Bai, X.-D., Li, B., et al. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c15759 · Cited by 63
Tuning the FEC‐Related Electrolyte Solvation Structures in Ether Solvents Enables High‐Performance Lithium Metal Anode
Zhang, Y., Li, F., Cao, Y., Yang, M., Han, X., Ji, Y., Chen, K., Liang, L., Sun, J., & Hou, G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202315527 · Cited by 67
Emerging Surface Engineering Methods for Lithium Metal Anodes: Critical Review Beyond Conventional SEI and Surface Coatings
Bae, J., Choi, K., Cheong, J. Y., Ahn, S., Cho, S., Im, S. G., & Kim, I. (2025) · Advances in Materials · doi:10.1002/adma.202501959 · Cited by 62
PVDF-HFP-SN-based gel polymer electrolyte for high-performance lithium-ion batteries
Huang, R., Xu, R., Zhang, J.-T., Wang, J.-Y., Zhou, T., Liu, M., & Wang, X. (2023) · Nano Reseach · doi:10.1007/s12274-023-5707-x · Cited by 62
Lithiophilic Ni3S2 layer decorated nickel foam (Ni3S2@Ni foam) with fast ion transfer kinetics for long-life lithium metal anodes
Fan, Y., He, X., Li, H., Huang, Y.-T., Sun, C.-H., Liu, H., Huangzhang, E., Sun, F.-Y., Zhao, X.-Y., & Nan, J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138384 · Cited by 62
Advanced Red Phosphorus/Carbon Composites with Practical Application Potential for Sodium Ion Batteries
Zhou, J.-H., Ye, W., Lian, X.-Y., Shi, Q.-T., Liu, Y., Yang, X.-Q., Liu, L.-J., Wang, D., Choi, J.-H., Sun, J.-Y., et al. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.12.042 · Cited by 62

Authors: Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q.
Affiliations: Tsinghua University (CN)
Corresponding author: Zhang, Qiang
ORCID: Zhang, Xue‐Qiang
Cheng, Xin‐Bing
Chen, Xiang
Yan, Chong
Zhang, Qiang
Venue: Advanced Functional Materials
Publisher: Wiley
Published: 2017-01-20
Volume: 27
Issue: 10
ISSN: 1616-301X (ISSN-L)
1616-3028
DOI: 10.1002/adfm.201605989
OpenAlex: W2579562509
Cited by: 1,699
References: 0
Citations by year: 2026: 81 · 2025: 135 · 2024: 161 · 2023: 203 · 2022: 230 · 2021: 228 · 2020: 242 · 2019: 231 · 2018: 130 · 2017: 58
FWCI: 75.16
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Functional Materials (publishedVersion)
Funders: National Key Research and Development Program (2016YFA0202500)
Natural Scientific Foundation of China (21422604, 21676160, 21561130151)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords: lithium metal batteries, fluoroethylene carbonate, electrolyte additives, lithium dendrite suppression, solid electrolyte interphase, LiF-rich SEI, lithium deposition uniformity, lithium metal anode, NCM cathode, Coulombic efficiency, high energy density

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Metadata

Record

About these checks