The DOI matches its Crossref record.
Diels–Alder Reversible Thermoset 3D Printing: Isotropic Thermoset Polymers via Fused Filament Fabrication
Abstract
This study presents a new 3D printing process, the Diels–Alder reversible thermoset (DART) process, and a first generation of printable DART resins, which exhibit thermoset properties at use temperatures, ultralow melt viscosity at print temperatures, smooth part surface finish, and as‐printed isotropic mechanical properties. This study utilizes dynamic covalent chemistry based on reversible furan‐maleimide Diels–Alder linkages in the polymers, which can be decrosslinked and melt‐processed during printing between 90 and 150 °C, and recrosslinked at lower temperatures to their entropically favored state. This study compares the first generation of DART materials to commonly 3D printed high‐toughness thermoplastics. Parts printed from typical fused filament fabrication compatible materials exhibit anisotropy of more than 50% and sometimes upward of 98% in toughness when deformed along the build direction, while the first generation of DART materials exhibit less than 4% toughness reduction when deformed along the build direction. At room temperature, the toughest DART materials exhibit baseline toughness of 18.59 ± 0.91 and 18.36 ± 0.57 MJ m−3 perpendicular and parallel to the build direction, respectively. DART printing will enable chemists, polymer engineers, materials scientists, and industrial designers to translate new robust materials possessing targeted thermomechanical properties, multiaxial toughness, smooth surface finish, and low anisotropy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.002 · Cited by 586
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Podgórski, M., Fairbanks, B. D., Kirkpatrick, B. E., McBride, M., Martinez, A., Dobson, A., Bongiardina, N. J., & Bowman, C. N. (2020) · Advanced Materials · doi:10.1002/adma.201906876 · Cited by 524
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Biodegradable 3D printed polymer microneedles for transdermal drug delivery
Luzuriaga, M. A., Berry, D. R., Reagan, J. C., Smaldone, R. A., & Gassensmith, J. J. (2018) · Lab on a Chip · doi:10.1039/c8lc00098k · Cited by 356
Self-citationLi, X., Yu, R., He, Y., Zhang, Y., Yang, X., Zhao, X., & Huang, W. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00766 · Cited by 355
4D printing: Fundamentals, materials, applications and challenges
Ahmed, A., Arya, S., Gupta, V., Furukawa, H., & Khosla, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123926 · Cited by 350
Trends in the Diels–Alder reaction in polymer chemistry
Briou, B., Améduri, B., & Boutevin, B. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01382j · Cited by 326
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
A review on self-healing polymers for soft robotics
Terryn, S., Langenbach, J., Roels, E., Brancart, J., Bakkali-Hassani, C., Poutrel, Q.-A., Georgopoulou, A., George Thuruthel, T., Safaei, A., Ferrentino, P., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.01.009 · Cited by 309
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Jourdain, A., Asbai, R., Anaya, O., Chehimi, M. M., Drockenmuller, E., & Montarnal, D. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02204 · Cited by 255
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Rational design of biodegradable thermoplastic polyurethanes for tissue repair
Xu, C., & Hong, Y. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.029 · Cited by 109
Metadata
- Authors
- Yang, K., Grant, J. C., Lamey, P., Joshi‐Imre, A., Lund, B. R., Smaldone, R. A., & Voit, W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-04-26
- Volume
- 27
- Issue
- 24
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2608588436
- Cited by
- 176
- References
- 0
- FWCI
- 7.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.