The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries
Abstract
Despite high‐energy density and low cost of the lithium–sulfur (Li–S) batteries, their commercial success is greatly impeded by their severe capacity decay during long‐term cycling caused by polysulfide shuttling. Herein, a new phase engineering strategy is demonstrated for making MXene/1T‐2H MoS 2‐C nanohybrids for boosting the performance of Li–S batteries in terms of capacity, rate ability, and stability. It is found that the plentiful positively charged S‐vacancy defects created on MXene/1T‐2H MoS 2‐C, proved by high‐resolution transmission electron microscopy and electron paramagnetic resonance, can serve as strong adsorption and activation sites for polar polysulfide intermediates, accelerate redox reactions, and prevent the dissolution of polysulfides. As a consequence, the novel MXene/1T‐2H MoS 2‐C‐S cathode delivers a high initial capacity of 1194.7 mAh g−1 at 0.1 C, a high level of capacity retention of 799.3 mAh g−1 after 300 cycles at 0.5 C, and reliable operation in soft‐package batteries. The present MXene/1T‐2H MoS 2‐C becomes among the best cathode materials for Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Self-citationGraphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Self-citationPure and stable metallic phase molybdenum disulfide nanosheets for hydrogen evolution reaction
Geng, X., Sun, W., Wu, W., Chen, B., Al-Hilo, A., Benamara, M., Zhu, H., Watanabe, F., Cui, J., & Chen, T.-P. (2016) · Nature Communications · doi:10.1038/ncomms10672 · Cited by 917
Vacancy-Induced Ferromagnetism of MoS2 Nanosheets
Cai, L., He, J., Liu, Q., Yao, T., Chen, L., Yan, W., Hu, F., Jiang, Y., Zhao, Y., Hu, T., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5120908 · Cited by 834
Self-citationWu, X., Wang, Z., Yu, M., Xiu, L., & Qiu, J. (2017) · Advanced Materials · doi:10.1002/adma.201607017 · Cited by 800
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Yin, J., Li, Y., Lv, F., Lu, M., Sun, K., Wang, W., Wang, L., Cheng, F., Li, Y., Xi, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704681 · Cited by 643
Self-citationPei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
Self-citationCovalent Nitrogen Doping and Compressive Strain in MoS2 by Remote N2 Plasma Exposure
Azcatl, A., Qin, X., Prakash, A., Zhang, C., Cheng, L., Wang, Q., Lu, N., Kim, M. J., Kim, J., Cho, K., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01853 · Cited by 491
Two-Dimensional Water-Coupled Metallic MoS2 with Nanochannels for Ultrafast Supercapacitors
Geng, X., Zhang, Y., Han, Y., Li, J., Yang, L., Benamara, M., Chen, L., & Zhu, H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b05134 · Cited by 419
Self-citationPang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Self-citationRehman, S., Guo, S., & Hou, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506111 · Cited by 311
Self-citationMa, L., Chen, R., Zhu, G., Hu, Y., Wang, Y., Chen, T., Liu, J., & Jin, Z. (2017) · ACS Nano · doi:10.1021/acsnano.7b03227 · Cited by 249
An, L., Li, Y., Luo, M., Yin, J., Zhao, Y., Xu, C., Cheng, F., Yang, Y., Xi, P., & Guo, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703779 · Cited by 246
Self-citationXiao, Z., Yang, Z., Zhang, L., Pan, H., & Wang, R. (2017) · ACS Nano · doi:10.1021/acsnano.7b04442 · Cited by 194
Fang, X., Guo, X., Mao, Y., Hua, C., Shen, L., Hu, Y., Wang, Z., Wu, F., & Chen, L. (2012) · Chemistry – An Asian Journal · doi:10.1002/asia.201100796 · Cited by 168
Amorphous Li2O2: Chemical Synthesis and Electrochemical Properties
Zhang, Y., Cui, Q., Zhang, X., McKee, W. C., Xu, Y., Ling, S., Li, H., Zhong, G., Yang, Y., & Peng, Z. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605228 · Cited by 161
Self-citationMa, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 152
A core–shell electrode for dynamically and statically stable Li–S battery chemistry
Chung, S., Chang, C., & Manthiram, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01280a · Cited by 139
Wu, F., Li, J., Tian, Y., Su, Y., Wang, J., Yang, W. J., Li, N., Chen, S., & Bao, L. (2015) · Scientific Reports · doi:10.1038/srep13340 · Cited by 132
Self-citationNiu, S., Zhou, G., Lv, W. Z., Shi, H., Luo, C., He, Y., Li, B., Yang, Q., & Kang, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.062 · Cited by 124
Comparative Study of Ether-Based Electrolytes for Application in Lithium–Sulfur Battery
Carbone, L., Gobet, M. P., Peng, J., Devany, M., Scrosati, B., Greenbaum, S., & Hassoun, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02160 · Cited by 116
Zhao, X., Zhao, H., Zhang, T., Yan, X., Yuan, Y., Zhang, H., Zhao, H., Zhang, D., Zhu, G., & Yao, X. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00846d · Cited by 89
Wang, T., Sun, C., Yang, M., Zhao, G., Wang, S., Ma, F., Zhang, L., Shao, Y., Wu, Y., Huang, B., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.05.071 · Cited by 83
Optimising the concentration of LiNO3 additive in C4mpyr-TFSI electrolyte-based Li-S battery
Barghamadi, M., Best, A. S., Hollenkamp, A. F., et al. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.169 · Cited by 27
Cited by
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Self-citationEmerging of Heterostructure Materials in Energy Storage: A Review
Li, Y., Zhang, J., Chen, Q., Xia, X., & Chen, M. (2021) · Advanced Materials · doi:10.1002/adma.202100855 · Cited by 794
Self-citationHe, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Metadata
- Authors
- Zhang, Y., Mu, Z., Yang, C., Xu, Z., Zhang, S., Zhang, X., Li, Y., Lai, J., Sun, Z., Yang, Y., Chao, Y., Li, C., Ge, X., Yang, W., & Guo, S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-03-30
- Volume
- 28
- Issue
- 38
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2795176403
- Cited by
- 417
- References
- 28
- FWCI
- 20.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.