The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Additive Manufacturing of Piezoelectric Materials
Abstract
Additive manufacturing technology has attracted unprecedented attention in industry because it provides infinite possibilities for rapid prototyping and enormous potential and opportunities for the production of electronic devices of various complex shapes. This paper focuses on the progress of additive manufacturing of piezoelectric materials in recent years, summarizing the advantages of additive manufacturing technology and its technical impact on the production of piezoelectric materials. It identifies the likely future research development direction of additive manufacturing technology, as well as the limitations of the current additive manufacturing technology in the context of piezoelectric materials. First, the various processes involved in additive manufacturing of piezoelectric devices and the impact of various processes on device performance are systematically summarized. Then, the development of additive manufacturing technology and slurry preparation of piezoelectric ceramic materials, piezoelectric polymer materials, and piezoelectric composites are introduced. Finally, the technical difficulties and potential research directions associated with additive manufacturing of piezoelectric materials are discussed. With the continuous development of additive manufacturing technology and piezoelectric materials, additive manufacturing of piezoelectric devices with excellent performance, high energy storage density, and high electromechanical conversion efficiency will be applied in a wider range of fields in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Ferroelectric Ceramics: History and Technology
Haertling, G. H. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01840.x · Cited by 4,051
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Fu, H., & Cohen, R. E. (2000) · Nature · doi:10.1038/35002022 · Cited by 2,182
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Enhancement of Ferroelectricity in Strained BaTiO 3 Thin Films
Choi, K. J., Biegalski, M., Li, Y. L., Sharan, A., Schubert, J., Uecker, R., Reiche, P., Chen, Y. B., Pan, X. Q., Gopalan, V., et al. (2004) · Science · doi:10.1126/science.1103218 · Cited by 1,961
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
A piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Wu, J., Xiao, D., & Zhu, J. (2015) · Chemical Reviews · doi:10.1021/cr5006809 · Cited by 1,608
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Ultrahigh piezoelectricity in ferroelectric ceramics by design
Li, F., Lin, D., Chen, Z., Cheng, Z., Wang, J., Li, C., Xu, Z., Huang, Q., Liao, X., Chen, L.-Q., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0034-4 · Cited by 1,408
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Vullers, R. J. M., van Schaijk, R., Doms, I., Van Hoof, C., & Mertens, R. (2009) · Solid-State Electronics · doi:10.1016/j.sse.2008.12.011 · Cited by 886
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
A Stable Vanadium Redox‐Flow Battery with High Energy Density for Large‐Scale Energy Storage
Li, L., Kim, S., Wang, W., Vijayakumar, M., Nie, Z., Chen, B., Zhang, J., Xia, G., Hu, J., Graff, G., et al. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100008 · Cited by 866
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Energy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
Self‐Powered Real‐Time Arterial Pulse Monitoring Using Ultrathin Epidermal Piezoelectric Sensors
Park, D. Y., Joe, D. J., Kim, D. H., Park, H., Han, J. H., Jeong, C. K., Park, H., Park, J. G., Joung, B., & Lee, K. J. (2017) · Advanced Materials · doi:10.1002/adma.201702308 · Cited by 691
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Kim, P., Jones, S. C., Hotchkiss, P. J., Haddock, J. N., Kippelen, B., Marder, S. R., & Perry, J. W. (2007) · Advanced Materials · doi:10.1002/adma.200602422 · Cited by 601
Narita, F., & Fox, M. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700743 · Cited by 527
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
Micro electrostatic energy harvester with both broad bandwidth and high normalized power density
Zhang, Y., Wang, T., Luo, A., Hu, Y., Li, X., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.053 · Cited by 423
Hu, Y., & Wang, Z. L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.038 · Cited by 413
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Strategies to achieve high performance piezoelectric nanogenerators
Hu, D., Yao, M., Fan, Y., Ma, C., Fan, M., & Liu, M. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.053 · Cited by 378
Self-citation3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
Sweeney, C. B., Lackey, B. A., Pospisil, M. J., Achee, T. C., Hicks, V. K., Moran, A. G., Teipel, B. R., Saed, M. A., & Green, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1700262 · Cited by 313
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
High-pressure structures and phase transformations in elemental metals
McMahon, M. I., & Nelmes, R. J. (2006) · Chemical Society Reviews · doi:10.1039/b517777b · Cited by 289
One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures
Bodkhe, S., Turcot, G., Gosselin, F. P., & Therriault, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04095 · Cited by 289
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Chen, Z., Song, X., Lei, L., Chen, X., Fei, C., Chiu, C. T., Qian, X., Ma, T., Yang, Y., Shung, K., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.048 · Cited by 277
Nguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
All 3D-printed stretchable piezoelectric nanogenerator with non-protruding kirigami structure
Zhou, X., Parida, K., Halevi, O., Liu, Y., Xiong, J., Magdassi, S., & Lee, P. S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104676 · Cited by 260
Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams
Luong, D. X., Subramanian, A. K., Silva, G. A. L., Yoon, J., Cofer, S., Yang, K., Owuor, P. S., Wang, T., Wang, Z., Lou, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707416 · Cited by 257
Wang, Z., Guan, X., Huang, H., Wang, H., Lin, W., & Peng, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807569 · Cited by 247
Mesocrystals: structural and morphogenetic aspects
Sturm (née Rosseeva), E. V., & Cölfen, H. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00208k · Cited by 240
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231
Self-citationWang, Y., Yao, M., Ma, R., Yuan, Q., Yang, D., Cui, B., Ma, C., Liu, M., & Hu, D. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11527g · Cited by 230
Self-citationThe Emerging Frontiers and Applications of High-Resolution 3D Printing
Mao, M., He, J., Li, X., Zhang, B., Lei, Q., Liu, Y., & Li, D. (2017) · Micromachines · doi:10.3390/mi8040113 · Cited by 224
Flexible piezoelectric polymer-based energy harvesting system for roadway applications
Jung, I., Shin, Y.-H., Kim, S., Choi, J.-Y., & Kang, C.-Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.020 · Cited by 223
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
3D printing of versatile reactionware for chemical synthesis
Kitson, P. J., Glatzel, S., Chen, W., Lin, C.-G., Song, Y.-F., & Cronin, L. (2016) · Nature Protocols · doi:10.1038/nprot.2016.041 · Cited by 217
Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers
Boyle, B. M., French, T. A., Pearson, R. M., McCarthy, B. G., & Miyake, G. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b00032 · Cited by 217
Liu, Y., Chang, Y., Li, F., Yang, B., Sun, Y., Wu, J., Zhang, S., Wang, R., & Cao, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08160 · Cited by 217
Kim, H., Torres, F., Wu, Y., Villagran, D., Lin, Y., & Tseng, T.-L. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa738e · Cited by 204
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Kenel, C., Casati, N. P. M., & Dunand, D. C. (2019) · Nature Communications · doi:10.1038/s41467-019-08763-4 · Cited by 183
Principles for Engineering IoT Cloud Systems
Truong, H.-L., & Dustdar, S. (2015) · IEEE Cloud Computing · doi:10.1109/mcc.2015.23 · Cited by 179
Additive manufacturing for aerospace flight applications
Shapiro, A. A., Borgonia, J. P., Chen, Q. N., Dillon, R. P., McEnerney, B., Polit-Casillas, R., & Soloway, L. (2016) · Journal of Spacecraft and Rockets · doi:10.2514/1.a33544 · Cited by 178
3D Printing of BaTiO3/PVDF Composites with Electric In Situ Poling for Pressure Sensor Applications
Kim, H., Torres, F., Villagran, D., Stewart, C., Lin, Y., & Tseng, T. B. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700229 · Cited by 177
Flexible piezoelectric ultrasonic energy harvester array for bio-implantable wireless generator
Jiang, L., Yang, Y., Chen, R., Lu, G., Li, R., Li, D., Humayun, M. S., Shung, K. K., Zhu, J., Chen, Y., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.052 · Cited by 176
Chang, S.-J., Liao, W.-S., Ciou, C.-J., Lee, J.-T., & Li, C.-C. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.10.011 · Cited by 174
Yang, Y., Chen, Z., Song, X., Zhu, B., Hsiai, T., Wu, P.-I., Xiong, R., Shi, J., Chen, Y., Zhou, Q., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.045 · Cited by 166
Niu, Y., Bai, Y., Yu, K., Wang, Y., Xiang, F., & Wang, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07486 · Cited by 153
Self-citationKong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 148
Liu, M., Yang, Z., Sun, H., Lai, C., Zhao, X., Peng, H., & Liu, T. X. (2016) · Nano Research · doi:10.1007/s12274-016-1244-1 · Cited by 144
Lee, C., & Tarbutton, J. A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/095044 · Cited by 143
Luo, G., Teh, K. S., Liu, Y., Zang, X., Wen, Z., & Lin, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08909 · Cited by 140
PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application
Chen, Y., Bao, X., Wong, C.-M., Cheng, J. H., Wu, H., Song, H., Ji, X., & Wu, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.09.055 · Cited by 140
Scaling and power density metrics of electromagnetic vibration energy harvesting devices
Moss, S. D., Payne, O. R., Hart, G. A., & Ung, C. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/2/023001 · Cited by 137
All-inorganic flexible piezoelectric energy harvester enabled by two-dimensional mica
Wang, D., Yuan, G., Hao, G., & Wang, Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.11.037 · Cited by 136
Self-citation3D printing of large, complex metallic glass structures
Shen, Y., Li, Y., Chen, C., & Tsai, H.-L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.087 · Cited by 131
Self-citationFlexible piezoelectric nano-composite films for kinetic energy harvesting from textiles
Almusallam, A., Luo, Z., Komolafe, A. O., Yang, K., Robinson, A. F., Torah, R. N., & Beeby, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.037 · Cited by 114
Fuh, Y., Wang, B. S., & Tsai, C. Y. (2017) · Scientific Reports · doi:10.1038/s41598-017-07360-z · Cited by 112
Self-citationFabrication and properties of novel polymer-metal composites using fused deposition modeling
Ryder, M. A., Lados, D. A., Iannacchione, G. S., & Peterson, A. M. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.049 · Cited by 107
3D Printing of BaTiO3 Piezoelectric Ceramics for a Focused Ultrasonic Array
Cheng, J. H., Chen, Y., Wu, J., Ji, X., & Wu, S. (2019) · Sensors · doi:10.3390/s19194078 · Cited by 106
Kim, H., Renteria, A., Islam, M. D., Chavez, L. A., Rosales, C. A. G., Ahsan, M. A., Tseng, T. B., Love, N. D., & Lin, Y. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.16242 · Cited by 102
Wu, H., Zhang, X., Ma, Z., Zhang, C., Ai, J., Chen, P., Yan, C., Su, B., & Shi, Y. (2020) · Advanced Science · doi:10.1002/advs.201903208 · Cited by 101
Gao, T., Liao, J., Wang, J., Qiu, Y., Yang, Q., Zhang, M., Zhao, Y., Qin, L., Xue, H., Xiong, Z., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01079a · Cited by 98
Lim, J., Jung, H., Baek, C., Hwang, G., Ryu, J., Yoon, D. H., Yoo, J., Park, K., & Kim, J. H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.046 · Cited by 91
Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires
Malakooti, M. H., Julé, F., & Sodano, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13643 · Cited by 90
Piezoelectric conversion and energy harvesting enhancement by initial energy injection
Lallart, M., & Guyomar, D. (2010) · Applied Physics Letters · doi:10.1063/1.3462304 · Cited by 87
Pan, C.-T., Yen, C.-K., Wu, H.-C., Lin, L., Lu, Y., Huang, J. C.-C., & Kuo, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00147a · Cited by 81
Porter, D. A., Hoang, T. V. T., & Berfield, T. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.005 · Cited by 81
Lead iodide nanosheets for piezoelectric energy conversion and strain sensing
Song, H., Karakurt, I., Wei, M., Liu, N., Chu, Y., Zhong, J., & Lin, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.029 · Cited by 78
Inkjet printing of ceramic colloidal suspensions: Filament growth and breakup
Bienia, M., Lejeune, M., Chambon, M., Baco-Carles, V., Dossou-Yovo, C., Noguéra, R., & Rossignol, F. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.04.015 · Cited by 44
Kim, H., Manriquez, L. C. D., Islam, M. T., et al. (2019) · MRS Communications · doi:10.1557/mrc.2019.109 · Cited by 42
Chen, Z., Qian, X., Song, X., Jiang, Q., Huang, R., Yang, Y., Li, R., Shung, K. K., Chen, Y., & Zhou, Q. (2019) · Micromachines · doi:10.3390/mi10030170 · Cited by 40
The Effect of Grinding Conditions on Lead Zirconate Titanate Machinability
Goat, C., & Whatmore, R. W. (1999) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(98)00426-9 · Cited by 30
Reversible Domain-Wall-Motion-Induced Low-Hysteretic Piezoelectric Response in Ferroelectrics
Hu, X., Gao, J., Wang, Y., Liu, Y., Li, L., Wang, D., Li, F., Yao, R., Zhong, L., & Ren, X. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b02585 · Cited by 18
Self-citationAdditive Manufacturing of Ferroelectric-Oxide Thin-Film Multilayer Devices
Matavž, A., Benčan, A., Kovač, J., Chung, C., Jones, J. L., Trolier-McKinstry, S. E., Malič, B., & Bobnar, V. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17912 · Cited by 15
Wei, W., & Xiong, H. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b03318 · Cited by 13
Cited by
Piezoelectric materials for flexible and wearable electronics: A review
Wu, Y., Ma, Y., Zheng, H., & Ramakrishna, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110164 · Cited by 521
Chen, S., Zhu, P., Mao, L., Wu, W., Lin, H., Xu, D., Lu, X., & Shi, J. (2023) · Advanced Materials · doi:10.1002/adma.202208256 · Cited by 363
Metadata
- Authors
- Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G. A., Yang, D., & Hu, D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-09-20
- Volume
- 30
- Issue
- 52
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3088917223
- Cited by
- 371
- References
- 107
- FWCI
- 17.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.