The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Abstract
With a certified efficiency as high as 25.2%, perovskite has taken the crown as the highest efficiency thin film solar cell material. Unfortunately, serious instability issues must be resolved before perovskite solar cells (PSCs) are commercialized. Aided by theoretical calculation, an appropriate multifunctional molecule, 2,2‐difluoropropanediamide (DFPDA), is selected to ameliorate all the instability issues. Specifically, the carbonyl groups in DFPDA form chemical bonds with Pb 2+ and passivate under‐coordinated Pb 2+ defects. Consequently, the perovskite crystallization rate is reduced and high‐quality films are produced with fewer defects. The amino groups not only bind with iodide to suppress ion migration but also increase the electron density on the carbonyl groups to further enhance their passivation effect. Furthermore, the fluorine groups in DFPDA form both an effective barrier on the perovskite to improve its moisture stability and a bridge between the perovskite and HTL for effective charge transport. In addition, they show an effective doping effect in the HTL to improve its carrier mobility. With the help of the combined effects of these groups in DFPDA, the PSCs with DFPDA additive achieve a champion efficiency of 22.21% and a substantially improved stability against moisture, heat, and light.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
A fast and robust algorithm for Bader decomposition of charge density
Henkelman, G., Arnaldsson, A., & Jónsson, H. (2006) · Computational Materials Science · doi:10.1016/j.commatsci.2005.04.010 · Cited by 10,723
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
A grid-based Bader analysis algorithm without lattice bias
Tang, W., Sanville, E., & Henkelman, G. (2009) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/21/8/084204 · Cited by 7,585
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Tkatchenko, A., & Scheffler, M. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.073005 · Cited by 6,286
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Improved grid‐based algorithm for Bader charge allocation
Sanville, E., Kenny, S. D., Smith, R., & Henkelman, G. (2007) · Journal of Computational Chemistry · doi:10.1002/jcc.20575 · Cited by 4,287
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Self-citationNoel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Arylamine organic dyes for dye-sensitized solar cells
Liang, M., & Chen, J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35372a · Cited by 1,136
Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation
Niu, T., Lu, J., Munir, R., Li, J., Barrit, D., Zhang, X., Hu, H., Yang, Z., Amassian, A., Zhao, K., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706576 · Cited by 797
Self-citationRecent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Yang, S., Dai, J., Yu, Z., Shao, Y., Zhou, Y., Xiao, X., Zeng, X. C., & Huang, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13091 · Cited by 744
Self-citationLi, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Nguyen, T. L., Choi, H., Ko, S.-J., Uddin, M. A., Walker, B., Yum, S., Jeong, J.-E., Yun, M. H., Shin, T. J., Hwang, S., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01529k · Cited by 643
Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells
Wang, Q., Dong, Q., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201600969 · Cited by 633
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08455-z · Cited by 588
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Braly, I. L., deQuilettes, D. W., Pazos-Outón, L. M., Burke, S., Ziffer, M. E., Ginger, D. S., & Hillhouse, H. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0154-z · Cited by 517
Wu, T., Wang, Y., Li, X., Wu, Y., Meng, X., Cui, D., Yang, X., & Han, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803766 · Cited by 382
Controlled n‐Doping in Air‐Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%
Han, Y., Zhao, H., Duan, C., Yang, S., Yang, Z., Liu, Z., & Liu, S. (. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909972 · Cited by 367
Self-citationKim, M., Motti, S. G., Sorrentino, R., & Petrozza, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01101j · Cited by 344
Bi, D., Li, X., Milić, J. V., Kubicki, D. J., Pellet, N., Luo, J., LaGrange, T., Mettraux, P., Emsley, L., Zakeeruddin, S. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06709-w · Cited by 339
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Self-citationHighly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation
Wu, Z., Jiang, M., Liu, Z., Jamshaid, A., Ono, L. K., & Qi, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903696 · Cited by 308
Self-citationLi, N., Luo, Y., Chen, Z., Niu, X., Zhang, X., Lu, J., Kumar, R., Jiang, J., Liu, H., Guo, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.06.005 · Cited by 281
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Cai, F., Cai, J., Yang, L., Li, W., Gurney, R. S., Yi, H., Iraqi, A., Liu, D., & Wang, T. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.028 · Cited by 275
Self-citationSequentially Fluorinated PTAA Polymers for Enhancing VOC of High‐Performance Perovskite Solar Cells
Kim, Y., Jung, E. H., Kim, G., Kim, D., Kim, B. J., & Seo, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801668 · Cited by 231
Matsui, T., Yamamoto, T., Nishihara, T., Morisawa, R., Yokoyama, T., Sekiguchi, T., & Negami, T. (2019) · Advanced Materials · doi:10.1002/adma.201806823 · Cited by 222
Efficient and stable tin-based perovskite solar cells by introducing π-conjugated Lewis base
Wu, T., Liu, X., He, X., Wang, Y., Meng, X., Noda, T., Yang, X., & Han, L. (2020) · Science China Chemistry · doi:10.1007/s11426-019-9653-8 · Cited by 213
Zhao, H., Han, Y., Xu, Z., Duan, C., Yang, S., Yuan, S., Yang, Z., Liu, Z., & Liu, S. (. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902279 · Cited by 212
Self-citationChen, H., Liu, T., Zhou, P., Li, S., Ren, J., He, H., Wang, J., Wang, N., & Guo, S. (2020) · Advanced Materials · doi:10.1002/adma.201905661 · Cited by 204
Yin, G., Ma, J., Jiang, H., Li, J., Yang, D., Gao, F., Zeng, J., Liu, Z., & Liu, S. F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01063 · Cited by 202
Self-citationCrystallization kinetics and melting behaviors of nylon 6/foliated graphite nanocomposites
Weng, W., Chen, G., & Wu, D. (2003) · Polymer · doi:10.1016/j.polymer.2003.10.028 · Cited by 194
NbF5: A Novel α‐Phase Stabilizer for FA‐Based Perovskite Solar Cells with High Efficiency
Yuan, S., Qian, F., Yang, S., Cai, Y., Wang, Q., Sun, J., Liu, Z., & Liu, S. (. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807850 · Cited by 188
Self-citationTargeted Therapy for Interfacial Engineering Toward Stable and Efficient Perovskite Solar Cells
Wang, S., Chen, H., Zhang, J., Xu, G., Chen, W., Xue, R., Zhang, M., Li, Y., & Li, Y. (2019) · Advanced Materials · doi:10.1002/adma.201903691 · Cited by 175
Self-citationChoi, M., Lee, Y.-S., Cho, I. H., Kim, S., Kim, D., Kwon, S., & Na, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104639 · Cited by 152
Interfacial charge-transfer doping of metal halide perovskites for high performance photovoltaics
Noel, N. K., Habisreutinger, S. N., Pellaroque, A., Pulvirenti, F., Wenger, B., Zhang, F., Lin, Y., Reid, O. G., Leisen, J., Zhang, Y., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01773a · Cited by 151
Duan, C., Cui, J. Y., Zhang, M., Han, Y., Yang, S., Zhao, H., Bian, H., Yao, J., Zhao, K., Liu, Z., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000691 · Cited by 140
Self-citationAhn, N., Kang, S. M., Lee, J., Choi, M., & Park, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03990h · Cited by 113
Xin, D., Tie, S., Yuan, R., Zheng, X., Zhu, J., & Zhang, W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b15166 · Cited by 89
Liu, S., Li, S., Wu, J., Wang, Q., Ming, Y., Zhang, D., Sheng, Y., Hu, Y., Rong, Y., Mei, A., et al. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b02463 · Cited by 81
Self-citationNovel Surface Passivation for Stable FA0.85MA0.15PbI3 Perovskite Solar Cells with 21.6% Efficiency
Fang, Q., Yuan, S., Cai, Y., Han, Y., Zhao, H., Sun, J., Liu, Z., & Liu, S. F. (2019) · Solar RRL · doi:10.1002/solr.201900072 · Cited by 75
Self-citationULK1 phosphorylates Exo70 to suppress breast cancer metastasis
Mao, L., Zhan, Y.-Y., Wu, B., Yu, Q., Xu, L., Hong, X., Zhong, L., Mi, P., Xiao, L., Wang, X., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13923-7 · Cited by 58
Guo, K., Wu, M., Yang, S., Wang, Z., Li, J., Liang, X., Zhang, F., Liu, Z., & Wang, Z. (2019) · Solar RRL · doi:10.1002/solr.201800352 · Cited by 46
Self-citationWang, S., Chen, Y., Li, R., Xu, Y., Feng, J., Yang, D. F., Yuan, N., Zhang, W., Liu, S. F., & Ding, J. (2020) · Advanced Science · doi:10.1002/advs.201903009 · Cited by 39
Self-citationBiswas, R., Carpenter, W. B., Voth, G. A., & Tokmakoff, A. (2016) · The Journal of Chemical Physics · doi:10.1063/1.4964723 · Cited by 25
Cited by
Ion migration in halide perovskite solar cells: Mechanism, characterization, impact and suppression
Zai, H., Ma, Y., Chen, Q., & Zhou, H. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.08.006 · Cited by 270
Recent advances in regenerative biomaterials
Cao, D., & Ding, J. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac098 · Cited by 259
Machine‐Learning Modeling for Ultra‐Stable High‐Efficiency Perovskite Solar Cells
Hu, Y., Hu, X., Zhang, L., Zheng, T., You, J., Jia, B., Ma, Y., Du, X., Zhang, L., Wang, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201463 · Cited by 88
Self-citationXu, J., Cui, J., Yang, S., Liu, Z., Guo, X., Che, Y., Xu, D., Zhao, W., Yuan, N., Ding, J., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202202829 · Cited by 59
Self-citation
Metadata
- Authors
- Cai, Y., Cui, J., Chen, M., Zhang, M., Han, Y., Qian, F., Zhao, H., Yang, S., Yang, Z., Bian, H., Wang, T., Guo, K., Cai, M., Dai, S., Liu, Z., & Liu, S. (.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-11-06
- Volume
- 31
- Issue
- 7
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3096200338
- Cited by
- 417
- References
- 57
- FWCI
- 22.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.