The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Polymer Layered Silicate Nanocomposites
Abstract
Polymer nanocomposites with layered silicates as the inorganic phase (reinforcement) are discussed. The materials design and synthesis rely on the ability of layered silicates to intercalate in the galleries between their layers a wide range of monomers and polymers. Special emphasis is placed on a new, versatile and environmentally benign synthesis approach by polymer melt intercalation. In contrast to in‐situ polymerization and solution intercalation, melt intercalation involves mixing the layered silicate with the polymer and heating the mixture above the softening point of the polymer. Compatibility with various polymers is accomplished by derivatizing the silicates with alkyl ammonium cations via an ion exchange reaction. By fine‐tuning the surface characteristics nanodispersion (i. e. intercalation or delamination) can be accomplished. The resulting polymer layered silicate (PLS) nanocomposites exhibit properties dramatically different from their more conventional counterparts. For example, PLS nanocomposites can attain a particular degree of stiffness, strength and barrier properties with far less inorganic content than comparable glass‐ or mineral reinforced polymers and, therefore, they are far lighter in weight. In addition, PLS nanocomposites exhibit significant increase in thermal stability as well as self‐extinguishing characteristics. The combination of improved properties, convenient processing and low cost has already led to a few commercial applications with more currently under development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Hybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Self-citationVaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Self-citationClay-Reinforced Epoxy Nanocomposites
Lan, T., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00048a006 · Cited by 1,133
Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1994) · Chemistry of Materials · doi:10.1021/cm00046a026 · Cited by 1,071
Self-citationMatrix-Mediated Synthesis of Nanocrystalline γ-Fe2O3: A New Optically Transparent Magnetic Material
Ziolo, R. F., Giannelis, E. P., Weinstein, B. A., O'Horo, M. P., Ganguly, B. N., Mehrotra, V., Russell, M. W., & Huffman, D. R. (1992) · Science · doi:10.1126/science.257.5067.219 · Cited by 859
Self-citationSynthesis and properties of new poly(dimethylsiloxane) nanocomposites
Burnside, S. D., & Giannelis, E. P. (1995) · Chemistry of Materials · doi:10.1021/cm00057a001 · Cited by 663
Self-citationVaia, R. A., Vasudevan, S., Krawiec, W., Scanlon, L. G., & Giannelis, E. P. (1995) · Advanced Materials · doi:10.1002/adma.19950070210 · Cited by 626
Self-citation
Cited by
Items 101–135 of 135
A short review on rubber/clay nanocomposites with emphasis on mechanical properties
Sengupta, R., Chakraborty, S., Bandyopadhyay, S., Dasgupta, S., Mukhopadhyay, R., Auddy, K., & Deuri, A. S. (2007) · Polymer Engineering & Science · doi:10.1002/pen.20921 · Cited by 307
Clay Assisted Dispersion of Carbon Nanotubes in Conductive Epoxy Nanocomposites
Liu, L., & Grunlan, J. C. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600785 · Cited by 303
Synthesis of nano cellulose fibers and effect on thermoplastics starch based films
Savadekar, N. R., & Mhaske, S. T. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.02.063 · Cited by 303
Wakabayashi, K., Pierre, C., Dikin, D. A., Ruoff, R. S., Ramanathan, T., Brinson, L. C., & Torkelson, J. M. (2008) · Macromolecules · doi:10.1021/ma071687b · Cited by 297
Nanoscopic-Confinement Effects on Local Dynamics
Anastasiadis, S. H., Karatasos, K., Vlachos, G., Manias, E., & Giannelis, E. P. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.915 · Cited by 291
Self-citationSrivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
Intercalation strategies in clay/polymer hybrids
Chiu, C.-W., Huang, T.-K., Wang, Y.-C., Alamani, B. G., & Lin, J.-J. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.002 · Cited by 289
Functional nanocomposites and their potential applications: A review
Hassan, T., Salam, A., Khan, A., Khan, S. U., Khanzada, H., Wasim, M., Khan, M. Q., & Kim, I. S. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02408-1 · Cited by 289
Effect of Nanoparticle Mobility on Toughness of Polymer Nanocomposites
Shah, D., Maiti, P., Jiang, D. D., Batt, C. A., & Giannelis, E. P. (2005) · Advanced Materials · doi:10.1002/adma.200400984 · Cited by 286
Self-citationZheng, L., Farris, R. J., & Coughlin, E. B. (2001) · Macromolecules · doi:10.1021/ma0110094 · Cited by 284
X-ray Characterizations of Polyethylene Polyhedral Oligomeric Silsesquioxane Copolymers
Zheng, L., Waddon, A. J., Farris, R. J., & Coughlin, E. B. (2002) · Macromolecules · doi:10.1021/ma011855e · Cited by 278
Rooj, S., Das, A., Thakur, V., Mahaling, R. N., Bhowmick, A. K., & Heinrich, G. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.11.009 · Cited by 276
Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers
Ljungberg, N., Cavaillé, J.-Y., & Heux, L. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.013 · Cited by 272
Yang, L., Phua, S. L., Teo, J. K. H., Toh, C. L., Lau, S. K., Ma, J., & Lu, X. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200532j · Cited by 271
Biocomposites reinforced with cellulose nanocrystals derived from potato peel waste
Chen, D., Lawton, D., Thompson, M. R., & Liu, Q. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.002 · Cited by 265
Polymer and ceramic nanocomposites for aerospace applications
Rathod, V. T., Kumar, J. S., & Jain, A. (2017) · Applied Nanoscience · doi:10.1007/s13204-017-0592-9 · Cited by 264
Polymer nanocomposites based on silylated-montmorillonite: A review
Bee, S.-L., Abdullah, M. A. A., Bee, S.-T., Sin, L. T., & Rahmat, A. R. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.003 · Cited by 263
Layer Structure Preservation during Swelling, Pillaring, and Exfoliation of a Zeolite Precursor
Maheshwari, S., Jordan, E., Kumar, S., Bates, F. S., Penn, R. L., Shantz, D. F., & Tsapatsis, M. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077711i · Cited by 262
Block Copolymer−Ceramic Hybrid Materials from Organically Modified Ceramic Precursors
Simon, P. F. W., Ulrich, R., Spiess, H. W., & Wiesner, U. (2001) · Chemistry of Materials · doi:10.1021/cm0110674 · Cited by 261
Hasegawa, N., Okamoto, H., Kato, M., Usuki, A., & Sato, N. (2003) · Polymer · doi:10.1016/s0032-3861(03)00215-5 · Cited by 261
Polymer Nanocomposites for Aerospace Applications: Properties
Njuguna, J., & Pielichowski, K. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310101 · Cited by 261
Delamination of Layered Double Hydroxides Containing Amino Acids
Hibino, T. (2004) · Chemistry of Materials · doi:10.1021/cm048842a · Cited by 259
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Di, Y., Iannace, S., Maio, E. D., & Nicolais, L. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20366 · Cited by 257
Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials
Wang, G., Yu, D., Kelkar, A. D., & Zhang, L. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.08.002 · Cited by 254
Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films
Thellen, C., Orroth, C., Froio, D., Ziegler, D., Lucciarini, J., Farrell, R., D'Souza, N. A., & Ratto, J. A. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.057 · Cited by 252
Echeverría, I., López-Caballero, M. E., Gómez-Guillén, M. C., Mauri, A. N., & Montero, M. P. (2018) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2017.10.003 · Cited by 175
“During the last decades nanoclay-based nanocomposites have gained more importance in research studies and the packaging industry due to their ease availability, processing, and low costs compared to those with other nanofillers (Giannelis, 1996).”
BackgroundSynthesis of polymer montmorillonite nanocomposites by in situ intercalative polymerization
Zeng, Q. H., Wang, D. Z., Yu, A. B., & Lu, G. Q. (2002) · Nanotechnology · doi:10.1088/0957-4484/13/5/301 · Cited by 163
Polymer-Based Nanomaterials for Drug-Delivery Carriers
Yadav, H. K. S., Almokdad, A. A., shaluf, S. I. M., & Debe, M. S. (2019) · Nanocarriers for Drug Delivery · doi:10.1016/b978-0-12-814033-8.00017-5 · Cited by 148
Nano clay reinforced PCL/starch blends obtained by high energy ball milling
Vertuccio, L., Gorrasi, G., Sorrentino, A., & Vittoria, V. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.07.020 · Cited by 142
Crystallinity and Chain Conformation in PEO/Layered Silicate Nanocomposites
Chrissopoulou, K., Andrikopoulos, K. S., Fotiadou, S., Bollas, S., Karageorgaki, C., Christofilos, D., Voyiatzis, G. A., & Anastasiadis, S. H. (2011) · Macromolecules · doi:10.1021/ma201711r · Cited by 134
(2007) · Food Science and Biotechnology · Cited by 74
Enhancement of mechanical properties of PLA/PCL (80/20) blend by reinforcing with MMT nanoclay
Umamaheswara Rao, R., Venkatanarayana, B., & Suman, K. N. S. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.280 · Cited by 45
Dimitry, O. I. H., Abdeen, Z., Ismail, E. A., & Saad, A. L. G. (2011) · International Journal of Green Nanotechnology · doi:10.1080/19430892.2011.628585 · Cited by 17
Thermal Degradation Effects on Polyurethanes and Their Nanocomposites
Navarro‐Baena, I., Arrieta, M. P., Mujica‐Garcia, A., Sessini, V., Lopez, D., Kenny, J. M., & Peponi, L. (2015) · Reactions and Mechanisms in Thermal Analysis of Advanced Materials · doi:10.1002/9781119117711.ch7 · Cited by 8
Metadata
- Authors
- Giannelis, E. P.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 1996-01
- Volume
- 8
- Issue
- 1
- Pages
- 29-35
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2042626809
- Cited by
- 3,479
- References
- 22
- FWCI
- 38.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.