The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Polymer Layered Silicate Nanocomposites
Abstract
Polymer nanocomposites with layered silicates as the inorganic phase (reinforcement) are discussed. The materials design and synthesis rely on the ability of layered silicates to intercalate in the galleries between their layers a wide range of monomers and polymers. Special emphasis is placed on a new, versatile and environmentally benign synthesis approach by polymer melt intercalation. In contrast to in‐situ polymerization and solution intercalation, melt intercalation involves mixing the layered silicate with the polymer and heating the mixture above the softening point of the polymer. Compatibility with various polymers is accomplished by derivatizing the silicates with alkyl ammonium cations via an ion exchange reaction. By fine‐tuning the surface characteristics nanodispersion (i. e. intercalation or delamination) can be accomplished. The resulting polymer layered silicate (PLS) nanocomposites exhibit properties dramatically different from their more conventional counterparts. For example, PLS nanocomposites can attain a particular degree of stiffness, strength and barrier properties with far less inorganic content than comparable glass‐ or mineral reinforced polymers and, therefore, they are far lighter in weight. In addition, PLS nanocomposites exhibit significant increase in thermal stability as well as self‐extinguishing characteristics. The combination of improved properties, convenient processing and low cost has already led to a few commercial applications with more currently under development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Hybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Self-citationVaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Self-citationClay-Reinforced Epoxy Nanocomposites
Lan, T., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00048a006 · Cited by 1,133
Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1994) · Chemistry of Materials · doi:10.1021/cm00046a026 · Cited by 1,071
Self-citationMatrix-Mediated Synthesis of Nanocrystalline γ-Fe2O3: A New Optically Transparent Magnetic Material
Ziolo, R. F., Giannelis, E. P., Weinstein, B. A., O'Horo, M. P., Ganguly, B. N., Mehrotra, V., Russell, M. W., & Huffman, D. R. (1992) · Science · doi:10.1126/science.257.5067.219 · Cited by 859
Self-citationSynthesis and properties of new poly(dimethylsiloxane) nanocomposites
Burnside, S. D., & Giannelis, E. P. (1995) · Chemistry of Materials · doi:10.1021/cm00057a001 · Cited by 663
Self-citationVaia, R. A., Vasudevan, S., Krawiec, W., Scanlon, L. G., & Giannelis, E. P. (1995) · Advanced Materials · doi:10.1002/adma.19950070210 · Cited by 626
Self-citation
Cited by
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Fu, S.-Y., Feng, X.-Q., Lauke, B., & Mai, Y.-W. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2008.01.002 · Cited by 3,549
Recent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,406
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Review of the proton exchange membranes for fuel cell applications
Peighambardoust, S. J., Rowshanzamir, S., & Amjadi, M. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.05.017 · Cited by 2,186
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites
Gilman, J. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00019-8 · Cited by 1,655
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
Sanchez, C., Belleville, P., Popall, M., & Nicole, L. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00136h · Cited by 1,462
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Hollaway, L. C. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.062 · Cited by 1,297
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Polymer-Silicate Nanocomposites: Model Systems for Confined Polymers and Polymer Brushes
Giannelis, E. P., Krishnamoorti, R., & Manias, E. (1999) · Advances in Polymer Science · doi:10.1007/3-540-69711-x_3 · Cited by 1,129
Self-citationModeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites
Bharadwaj, R. K. (2001) · Macromolecules · doi:10.1021/ma010780b · Cited by 1,128
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Graphene-polymer nanocomposites for structural and functional applications
Hu, K., Kulkarni, D. D., Choi, I., & Tsukruk, V. V. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.03.001 · Cited by 1,085
Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite
Xie, W., Gao, Z., Pan, W.-P., Hunter, D., Singh, A., & Vaia, R. (2001) · Chemistry of Materials · doi:10.1021/cm010305s · Cited by 1,034
Nanoparticle networks reduce the flammability of polymer nanocomposites
Kashiwagi, T., Du, F., Douglas, J. F., Winey, K. I., Harris, R. H., & Shields, J. R. (2005) · Nature Materials · doi:10.1038/nmat1502 · Cited by 996
Preparation and Characterization of Chitosan-Based Nanocomposite Films with Antimicrobial Activity
Rhim, J.-W., Hong, S.-I., Park, H.-M., & Ng, P. K. W. (2006) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf060658h · Cited by 960
Nanotechnology with Soft Materials
Hamley, I. W. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200200546 · Cited by 914
Some basic aspects of polymer nanocomposites: A critical review
Fu, S., Sun, Z., Huang, P., Li, Y., & Hu, N. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.006 · Cited by 881
Natural Biopolymer-Based Nanocomposite Films for Packaging Applications
Rhim, J.-W., & Ng, P. K. W. (2007) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390600846366 · Cited by 849
Synthesis, Structure, and Properties of Organic‐Inorganic Perovskites and Related Materials
Mitzi, D. B. (1999) · Progress in Inorganic Chemistry · doi:10.1002/9780470166499.ch1 · Cited by 805
Winey, K. I., & Vaia, R. A. (2007) · MRS Bulletin · doi:10.1557/mrs2007.229 · Cited by 756
Electrode Materials for Supercapacitors: A Review of Recent Advances
Forouzandeh, P., Kumaravel, V., & Pillai, S. C. (2020) · Catalysts · doi:10.3390/catal10090969 · Cited by 749
Bionanocomposites materials for food packaging applications: concepts and future outlook
Youssef, A. M., & El-Sayed, S. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.088 · Cited by 738
Nanotechnologies in the food industry – Recent developments, risks and regulation
Cushen, M., Kerry, J., Morris, M., Cruz-Romero, M., & Cummins, E. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.10.006 · Cited by 680
Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films
Rhim, J.-W., Hong, S.-I., & Ha, C.-S. (2009) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2008.02.015 · Cited by 679
Khan, A., Khan, R. A., Salmieri, S., Le Tien, C., Riedl, B., Bouchard, J., Chauve, G., Tan, V., Kamal, M. R., & Lacroix, M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.037 · Cited by 677
Epoxy clay nanocomposites – processing, properties and applications: A review
Azeez, A. A., Rhee, K. Y., Park, S. J., & Hui, D. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.012 · Cited by 660
Multiscale modeling and simulation of polymer nanocomposites
Zeng, Q. H., Yu, A. B., & Lu, G. Q. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.002 · Cited by 657
Titanium Oxide Nanosheets: Graphene Analogues with Versatile Functionalities
Wang, L., & Sasaki, T. (2014) · Chemical Reviews · doi:10.1021/cr400627u · Cited by 646
Morgan, A. B., & Gilman, J. W. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11884 · Cited by 626
Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites
Kashiwagi, T., Grulke, E., Hilding, J., Groth, K., Harris, R., Butler, K., Shields, J., Kharchenko, S., & Douglas, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.088 · Cited by 618
Polymer–clay nanocomposites: exfoliation of organophilic montmorillonite nanolayers in polystyrene
Fu, X., & Qutubuddin, S. (2001) · Polymer · doi:10.1016/s0032-3861(00)00385-2 · Cited by 614
Studies on thermal and mechanical properties of polyimide–clay nanocomposites
Agag, T., Koga, T., & Takeichi, T. (2001) · Polymer · doi:10.1016/s0032-3861(00)00824-7 · Cited by 599
A Rheological Study on the Kinetics of Hybrid Formation in Polypropylene Nanocomposites
Galgali, G., Ramesh, C., & Lele, A. (2001) · Macromolecules · doi:10.1021/ma000565f · Cited by 596
Zhao, M., Zhang, Q., Huang, J., & Wei, F. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102222 · Cited by 590
Mechanical and thermal properties of graphite platelet/epoxy composites
Yasmin, A., & Daniel, I. M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.054 · Cited by 585
An overview on the degradability of polymer nanocomposites
Pandey, J. K., Raghunatha Reddy, K., Pratheep Kumar, A., & Singh, R. P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.09.013 · Cited by 584
Continuous self-assembly of organic–inorganic nanocomposite coatings that mimic nacre
Sellinger, A., Weiss, P. M., Nguyen, A., Lu, Y., Assink, R. A., Gong, W., & Brinker, C. J. (1998) · Nature · doi:10.1038/28354 · Cited by 579
Self-assembly of mesoscopically ordered chromatic polydiacetylene/silica nanocomposites
Lu, Y., Yang, Y., Sellinger, A., Lu, M., Huang, J., Fan, H., Haddad, R., Lopez, G., Burns, A. R., Sasaki, D. Y., et al. (2001) · Nature · doi:10.1038/35073544 · Cited by 555
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Ren, J., Silva, A. S., & Krishnamoorti, R. (2000) · Macromolecules · doi:10.1021/ma992091u · Cited by 535
Biopolymer chitosan/montmorillonite nanocomposites: Preparation and characterization
Wang, S. F., Shen, L., Tong, Y. J., Chen, L., Phang, I. Y., Lim, P. Q., & Liu, T. X. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.001 · Cited by 511
New advances in polymer/layered silicate nanocomposites
Schmidt, D., Shah, D., & Giannelis, E. P. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00049-9 · Cited by 505
Self-citationPolyurethane/clay nanocomposites foams: processing, structure and properties
Cao, X., James Lee, L., Widya, T., & Macosko, C. (2005) · Polymer · doi:10.1016/j.polymer.2004.11.028 · Cited by 496
Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites
Awad, W. H., Gilman, J. W., Nyden, M., Harris, R. H., Sutto, T. E., Callahan, J., Trulove, P. C., DeLong, H. C., & Fox, D. M. (2004) · Thermochimica Acta · doi:10.1016/s0040-6031(03)00334-4 · Cited by 488
Polymer Nanocomposites with Prescribed Morphology: Going beyond Nanoparticle-Filled Polymers
Vaia, R. A., & Maguire, J. F. (2007) · Chemistry of Materials · doi:10.1021/cm062693+ · Cited by 481
Graphene–Polymer Nanofiber Membrane for Ultrafast Photonics
Bao, Q., Zhang, H., Yang, J., Wang, S., Tang, D. Y., Jose, R., Ramakrishna, S., Lim, C. T., & Loh, K. P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901658 · Cited by 479
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Nanotechnology in food science: Functionality, applicability, and safety assessment
He, X., & Hwang, H.-M. (2016) · Journal of Food and Drug Analysis · doi:10.1016/j.jfda.2016.06.001 · Cited by 474
Flame retardant mechanism of polyamide 6–clay nanocomposites
Kashiwagi, T., Harris, R. H., Zhang, X., Briber, R. M., Cipriano, B. H., Raghavan, S. R., Awad, W. H., & Shields, J. R. (2004) · Polymer · doi:10.1016/j.polymer.2003.11.036 · Cited by 461
Recent Progress in Synthesis and Evaluation of Polymer-Montmorillonite Nanocomposites
Biswas, M., & Ray, S. S. (2001) · Advances in Polymer Science · doi:10.1007/3-540-44473-4_3 · Cited by 457
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
A Review of the Synthesis and Applications of Polymer–Nanoclay Composites
Guo, F., Aryana, S., Han, Y., & Jiao, Y. (2018) · Applied Sciences · doi:10.3390/app8091696 · Cited by 445
Synthesis and characterization of maleated polyethylene/clay nanocomposites
Wang, K. H., Choi, M. H., Koo, C. M., Choi, Y. S., & Chung, I. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00509-2 · Cited by 442
Ogawa, M., & Kuroda, K. (1997) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.70.2593 · Cited by 439
Preparation and characterization of graphite nanosheets from ultrasonic powdering technique
Chen, G., Weng, W., Wu, D., Wu, C., Lu, J., Wang, P., & Chen, X. (2004) · Carbon · doi:10.1016/j.carbon.2003.12.074 · Cited by 434
Towards High‐Performance Bioinspired Composites
Studart, A. R. (2012) · Advanced Materials · doi:10.1002/adma.201201471 · Cited by 429
Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites
Wang, F., Drzal, L. T., Qin, Y., & Huang, Z. (2015) · Journal of Materials Science · doi:10.1007/s10853-014-8665-6 · Cited by 421
Chen, L., Li, W., Fan, L., Nan, C., & Zhang, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901047 · Cited by 421
Glass transition of polymers in bulk, confined geometries, and near interfaces
Napolitano, S., Glynos, E., & Tito, N. B. (2017) · Reports on Progress in Physics · doi:10.1088/1361-6633/aa5284 · Cited by 420
Kashiwagi, T., Du, F., Winey, K. I., Groth, K. M., Shields, J. R., Bellayer, S. P., Kim, H., & Douglas, J. F. (2005) · Polymer · doi:10.1016/j.polymer.2004.10.087 · Cited by 419
Synthesis and Characterization of PMMA Nanocomposites by Suspension and Emulsion Polymerization
Huang, X., & Brittain, W. J. (2001) · Macromolecules · doi:10.1021/ma001670s · Cited by 419
POSS Polymers: Physical Properties and Biomaterials Applications
Wu, J., & Mather, P. T. (2009) · Polymer Reviews · doi:10.1080/15583720802656237 · Cited by 411
Chang, J., An, Y. U., & Sur, G. S. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10349 · Cited by 410
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Casariego, A., Souza, B. W. S., Cerqueira, M. A., Teixeira, J. A., Cruz, L., Díaz, R., & Vicente, A. A. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2009.02.007 · Cited by 407
Rheology of polymer layered silicate nanocomposites
Krishnamoorti, R., & Yurekli, K. (2001) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(01)00121-2 · Cited by 403
Polymer Nanocomposites: Status and Opportunities
Vaia, R. A., & Giannelis, E. P. (2001) · MRS Bulletin · doi:10.1557/mrs2001.93 · Cited by 402
Self-citationTitanium oxo-clusters: precursors for a Lego-like construction of nanostructured hybrid materials
Rozes, L., & Sanchez, C. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00137f · Cited by 395
Goffin, A.-L., Raquez, J.-M., Duquesne, E., Siqueira, G., Habibi, Y., Dufresne, A., & Dubois, P. (2011) · Biomacromolecules · doi:10.1021/bm200581h · Cited by 395
Weimer, M. W., Chen, H., Giannelis, E. P., & Sogah, D. Y. (1999) · Journal of the American Chemical Society · doi:10.1021/ja983751y · Cited by 390
Self-citationNanosized microporous crystals: emerging applications
Mintova, S., Jaber, M., & Valtchev, V. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00210a · Cited by 385
Patel, H. A., Somani, R. S., Bajaj, H. C., & Jasra, R. V. (2006) · Bulletin of Materials Science · doi:10.1007/bf02704606 · Cited by 379
Emerging biodegradable materials: starch- and protein-based bio-nanocomposites
Zhao, R., Torley, P., & Halley, P. J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2434-8 · Cited by 376
Thermal Behaviour of Poly(propylene) Layered Silicate Nanocomposites
Zanetti, M., Camino, G., Reichert, P., & Mülhaupt, R. (2001) · Macromolecular Rapid Communications · doi:10.1002/1521-3927(200102)22:3<176::aid-marc176>3.0.co;2-c · Cited by 374
Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties
Huang, J.-C., He, C.-B., Xiao, Y., Mya, K. Y., Dai, J., & Siow, Y. P. (2003) · Polymer · doi:10.1016/s0032-3861(03)00434-8 · Cited by 372
Khatua, B. B., Lee, D. J., Kim, H. Y., & Kim, J. K. (2004) · Macromolecules · doi:10.1021/ma0352072 · Cited by 365
Functionalized graphene sheet filled silicone foam nanocomposites
Verdejo, R., Barroso-Bujans, F., Rodriguez-Perez, M. A., Antonio de Saja, J., & Lopez-Manchado, M. A. (2008) · Journal of Materials Chemistry · doi:10.1039/b718289a · Cited by 364
The amount of immobilized polymer in PMMA SiO2 nanocomposites determined from calorimetric data
Sargsyan, A., Tonoyan, A., Davtyan, S., & Schick, C. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.011 · Cited by 363
Tien, Y. I., & Wei, K. H. (2001) · Polymer · doi:10.1016/s0032-3861(00)00729-1 · Cited by 361
Polymer modified clay minerals: A review
Liu, P. (2007) · Applied Clay Science · doi:10.1016/j.clay.2007.01.004 · Cited by 352
Materials and Fabrication Methods for Electrochemical Supercapacitors: Overview
Lokhande, P. E., Chavan, U. S., & Pandey, A. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00057-z · Cited by 351
Polymer Layered Silicate Nanocomposites: A Review
Mittal, V. (2009) · Materials · doi:10.3390/ma2030992 · Cited by 344
Promises and Problems of Mesoscale Materials Chemistry or Why Meso?
Antonietti, M., & Ozin, G. A. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305009 · Cited by 339
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Kim, I., & Jeong, Y. G. (2010) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21956 · Cited by 331
Progress in nano-biocomposites based on polysaccharides and nanoclays
Chivrac, F., Pollet, E., & Avérous, L. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.09.002 · Cited by 321
Poly ( l -Lactic Acid)/Layered Silicate Nanocomposite: Fabrication, Characterization, and Properties
Krikorian, V., & Pochan, D. J. (2003) · Chemistry of Materials · doi:10.1021/cm034369+ · Cited by 320
Multiscale engineered artificial tooth enamel
Zhao, H., Liu, S., Wei, Y., Yue, Y., Gao, M., Li, Y., Zeng, X., Deng, X., Kotov, N. A., Guo, L., et al. (2022) · Science · doi:10.1126/science.abj3343 · Cited by 317
High barrier graphene oxide nanosheet/poly(vinyl alcohol) nanocomposite films
Huang, H.-D., Ren, P.-G., Chen, J., Zhang, W.-Q., Ji, X., & Li, Z.-M. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.03.051 · Cited by 316
Metadata
- Authors
- Giannelis, E. P.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 1996-01
- Volume
- 8
- Issue
- 1
- Pages
- 29-35
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2042626809
- Cited by
- 3,479
- References
- 22
- FWCI
- 38.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.