The DOI matches its Crossref record; 159 of the 159 references it cites were found in a registry or an index.
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
Abstract
Solution‐processed bulk heterojunction organic photovoltaic (OPV) devices have gained serious attention during the last few years and are established as one of the leading next generation photovoltaic technologies for low cost power production. This article reviews the OPV development highlights of the last two decades, and summarizes the key milestones that have brought the technology to today’s efficiency performance of over 7%. An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide‐spread applications. With first products already entering the market, sufficient lifetime for the intended application becomes more and more critical, and the status of OPV stability as well as the current understanding of degradation mechanisms will be reviewed in the second part of this article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Handbook of conducting polymers
Skotheim, T. A., Elsenbaumer, R. L., & Reynolds, J. R. (1986) · M. Dekker eBooks · Cited by 8,079
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Self-citationHybrid Nanorod-Polymer Solar Cells
Huynh, W. U., Dittmer, J. J., & Alivisatos, A. P. (2002) · Science · doi:10.1126/science.1069156 · Cited by 5,014
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Cited by
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances
Fortunato, E., Barquinha, P., & Martins, R. (2012) · Advanced Materials · doi:10.1002/adma.201103228 · Cited by 3,197
Chemically Derived Graphene Oxide: Towards Large‐Area Thin‐Film Electronics and Optoelectronics
Eda, G., & Chhowalla, M. (2010) · Advanced Materials · doi:10.1002/adma.200903689 · Cited by 2,283
Georgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Small molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Solution-processed small-molecule solar cells with 6.7% efficiency
Sun, Y., Welch, G. C., Leong, W. L., Takacs, C. J., Bazan, G. C., & Heeger, A. J. (2012) · Nature Materials · doi:10.1038/nmat3160 · Cited by 1,496
Advances in Conjugated Microporous Polymers
Lee, J.-S. M., & Cooper, A. I. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00399 · Cited by 1,394
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
P3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Dang, M. T., Hirsch, L., & Wantz, G. (2011) · Advanced Materials · doi:10.1002/adma.201100792 · Cited by 1,261
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Huang, Y., Kramer, E. J., Heeger, A. J., & Bazan, G. C. (2014) · Chemical Reviews · doi:10.1021/cr400353v · Cited by 1,249
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
Zhang, M., Guo, X., Ma, W., Ade, H., & Hou, J. (2015) · Advanced Materials · doi:10.1002/adma.201502110 · Cited by 1,247
Stassen, I., Burtch, N., Talin, A., Falcaro, P., Allendorf, M., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00122c · Cited by 1,210
On the origin of the open-circuit voltage of polymer–fullerene solar cells
Vandewal, K., Tvingstedt, K., Gadisa, A., Inganäs, O., & Manca, J. V. (2009) · Nature Materials · doi:10.1038/nmat2548 · Cited by 1,209
Yip, H.-L., & Jen, A. K.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02806a · Cited by 1,117
H- and J-Aggregate Behavior in Polymeric Semiconductors
Spano, F. C., & Silva, C. (2014) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-040513-103639 · Cited by 1,112
Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
Chen, J., Cui, C., Li, Y., Zhou, L., Ou, Q., Li, C., Li, Y., & Tang, J. (2015) · Advanced Materials · doi:10.1002/adma.201404535 · Cited by 1,063
Chu, T.-Y., Lu, J., Beaupré, S., Zhang, Y., Pouliot, J.-R., Wakim, S., Zhou, J., Leclerc, M., Li, Z., Ding, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200314m · Cited by 1,047
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Functional soft materials from metallopolymers and metallosupramolecular polymers
Whittell, G. R., Hager, M. D., Schubert, U. S., & Manners, I. (2011) · Nature Materials · doi:10.1038/nmat2966 · Cited by 1,013
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
Zhao, G., He, Y., & Li, Y. (2010) · Advanced Materials · doi:10.1002/adma.201001339 · Cited by 908
Zhang, J., Zhang, G., Chen, X., Lin, S., Möhlmann, L., Dołęga, G., Lipner, G., Antonietti, M., Blechert, S., & Wang, X. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106656 · Cited by 862
Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells
Li, S.-S., Tu, K.-H., Lin, C.-C., Chen, C.-W., & Chhowalla, M. (2010) · ACS Nano · doi:10.1021/nn100551j · Cited by 780
Müller‐Buschbaum, P. (2014) · Advanced Materials · doi:10.1002/adma.201304187 · Cited by 730
Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar Cells
Amb, C. M., Chen, S., Graham, K. R., Subbiah, J., Small, C. E., So, F., & Reynolds, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204056m · Cited by 702
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Powering up the Future: Radical Polymers for Battery Applications
Janoschka, T., Hager, M. D., & Schubert, U. S. (2012) · Advanced Materials · doi:10.1002/adma.201203119 · Cited by 647
Coffin, R. C., Peet, J., Rogers, J., & Bazan, G. C. (2009) · Nature Chemistry · doi:10.1038/nchem.403 · Cited by 597
Dang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Light Harvesting for Organic Photovoltaics
Hedley, G. J., Ruseckas, A., & Samuel, I. D. W. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00215 · Cited by 580
Controlling Molecular Doping in Organic Semiconductors
Jacobs, I. E., & Moulé, A. J. (2017) · Advanced Materials · doi:10.1002/adma.201703063 · Cited by 572
8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer
Cnops, K., Rand, B. P., Cheyns, D., Verreet, B., Empl, M. A., & Heremans, P. (2014) · Nature Communications · doi:10.1038/ncomms4406 · Cited by 569
Coherent ultrafast charge transfer in an organic photovoltaic blend
Falke, S. M., Rozzi, C. A., Brida, D., Maiuri, M., Amato, M., Sommer, E., De Sio, A., Rubio, A., Cerullo, G., Molinari, E., et al. (2014) · Science · doi:10.1126/science.1249771 · Cited by 554
The development of carbon dots: From the perspective of materials chemistry
Li, S., Li, L., Tu, H., Zhang, H., Silvester, D. S., Banks, C. E., Zou, G., Hou, H., & Ji, X. (2021) · Materials Today · doi:10.1016/j.mattod.2021.07.028 · Cited by 550
Visibly Transparent Polymer Solar Cells Produced by Solution Processing
Chen, C.-C., Dou, L., Zhu, R., Chung, C.-H., Song, T.-B., Zheng, Y. B., Hawks, S., Li, G., Weiss, P. S., & Yang, Y. (2012) · ACS Nano · doi:10.1021/nn3029327 · Cited by 542
Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%
Sun, D., Meng, D., Cai, Y., Fan, B., Li, Y., Jiang, W., Huo, L., Sun, Y., & Wang, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06414 · Cited by 527
Duan, C., Huang, F., & Cao, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30470h · Cited by 498
High‐Efficiency Polymer Solar Cells Enhanced by Solvent Treatment
Zhou, H., Zhang, Y., Seifter, J., Collins, S. D., Luo, C., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2013) · Advanced Materials · doi:10.1002/adma.201204306 · Cited by 492
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Carbazole-based polymers for organic photovoltaic devices
Li, J., & Grimsdale, A. C. (2010) · Chemical Society Reviews · doi:10.1039/b915995a · Cited by 482
Zhang, X., Lu, Z., Ye, L., Zhan, C., Hou, J., Zhang, S., Jiang, B., Zhao, Y., Huang, J., Zhang, S., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300897 · Cited by 474
Jinno, H., Fukuda, K., Xu, X., Park, S., Suzuki, Y., Koizumi, M., Yokota, T., Osaka, I., Takimiya, K., & Someya, T. (2017) · Nature Energy · doi:10.1038/s41560-017-0001-3 · Cited by 471
Polymer solar cells: Recent development and possible routes for improvement in the performance
Cai, W., Gong, X., & Cao, Y. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.10.005 · Cited by 463
The meniscus-guided deposition of semiconducting polymers
Gu, X., Shaw, L., Gu, K., Toney, M. F., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-02833-9 · Cited by 462
Blase, X., Attaccalite, C., & Olevano, V. (2011) · Physical Review B · doi:10.1103/physrevb.83.115103 · Cited by 448
Forever young: polycyclic aromatic hydrocarbons as model cases for structural and optical studies
Rieger, R., & Müllen, K. (2010) · Journal of Physical Organic Chemistry · doi:10.1002/poc.1644 · Cited by 446
Polymer Donors for High‐Performance Non‐Fullerene Organic Solar Cells
Fu, H., Wang, Z., & Sun, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201806291 · Cited by 436
Polymer Homo‐Tandem Solar Cells with Best Efficiency of 11.3%
Zhou, H., Zhang, Y., Mai, C., Collins, S. D., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2015) · Advanced Materials · doi:10.1002/adma.201404220 · Cited by 431
Liu, X., Xie, B., Duan, C., Wang, Z., Fan, B., Zhang, K., Lin, B., Colberts, F. J. M., Ma, W., Janssen, R. A. J., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10136h · Cited by 430
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Li, W., Ye, L., Li, S., Yao, H., Ade, H., & Hou, J. (2018) · Advanced Materials · doi:10.1002/adma.201707170 · Cited by 422
Hu, H., Jiang, K., Yang, G., Liu, J., Li, Z., Lin, H., Liu, Y., Zhao, J., Zhang, J., Huang, F., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08556 · Cited by 402
Organic semiconductor density of states controls the energy level alignment at electrode interfaces
Oehzelt, M., Koch, N., & Heimel, G. (2014) · Nature Communications · doi:10.1038/ncomms5174 · Cited by 387
Molecular Miscibility of Polymer−Fullerene Blends
Collins, B. A., Gann, E., Guignard, L., He, X., McNeill, C. R., & Ade, H. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz101276h · Cited by 386
Li, N., Perea, J. D., Kassar, T., Richter, M., Heumueller, T., Matt, G. J., Hou, Y., Güldal, N. S., Chen, H., Chen, S., et al. (2017) · Nature Communications · doi:10.1038/ncomms14541 · Cited by 383
Self-citationEfficiency Enhancement of Organic Solar Cells Using Transparent Plasmonic Ag Nanowire Electrodes
Kang, M., Xu, T., Park, H. J., Luo, X., & Guo, L. J. (2010) · Advanced Materials · doi:10.1002/adma.201001395 · Cited by 381
Perylene diimides based materials for organic solar cells
Kozma, E., & Catellani, M. (2013) · Dyes and Pigments · doi:10.1016/j.dyepig.2013.01.020 · Cited by 378
Organic non-fullerene acceptors for organic photovoltaics
Sonar, P., Fong Lim, J. P., & Chan, K. L. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00668h · Cited by 378
Yin, Z., & Zheng, Q. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100560 · Cited by 374
Organic photovoltaics: a chemical approach
Delgado, J. L., Bouit, P.-A., Filippone, S., Herranz, M., & Martín, N. (2010) · Chemical Communications · doi:10.1039/c003088k · Cited by 373
Star-shaped π-conjugated oligomers and their applications in organic electronics and photonics
Kanibolotsky, A. L., Perepichka, I. F., & Skabara, P. J. (2010) · Chemical Society Reviews · doi:10.1039/b918154g · Cited by 366
Business, market and intellectual property analysis of polymer solar cells
Nielsen, T. D., Cruickshank, C., Foged, S., Thorsen, J., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.074 · Cited by 361
Recyclable organic solar cells on cellulose nanocrystal substrates
Zhou, Y., Fuentes-Hernandez, C., Khan, T. M., Liu, J.-C., Hsu, J., Shim, J. W., Dindar, A., Youngblood, J. P., Moon, R. J., & Kippelen, B. (2013) · Scientific Reports · doi:10.1038/srep01536 · Cited by 359
Zhu, W., Spencer, A. P., Mukherjee, S., Alzola, J. M., Sangwan, V. K., Amsterdam, S. H., Swick, S. M., Jones, L. O., Heiber, M. C., Herzing, A. A., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c05560 · Cited by 351
Kawashima, K., Fukuhara, T., Suda, Y., Suzuki, Y., Koganezawa, T., Yoshida, H., Ohkita, H., Osaka, I., & Takimiya, K. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05418 · Cited by 342
Chochos, C. L., & Choulis, S. A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.003 · Cited by 340
Wang, W., Jiang, B., Xiong, W., Sun, H., Lin, Z., Hu, L., Tu, J., Hou, J., Zhu, H., & Jiao, S. (2013) · Scientific Reports · doi:10.1038/srep03383 · Cited by 337
Charge Formation, Recombination, and Sweep‐Out Dynamics in Organic Solar Cells
Cowan, S. R., Banerji, N., Leong, W. L., & Heeger, A. J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101632 · Cited by 336
Po, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Influence of the Bridging Atom on the Performance of a Low‐Bandgap Bulk Heterojunction Solar Cell
Scharber, M. C., Koppe, M., Gao, J., Cordella, F., Loi, M. A., Denk, P., Morana, M., Egelhaaf, H., Forberich, K., Dennler, G., et al. (2010) · Advanced Materials · doi:10.1002/adma.200900529 · Cited by 336
Self-citationEnergy autonomous electronic skin
García Núñez, C., Manjakkal, L., & Dahiya, R. (2019) · npj Flexible Electronics · doi:10.1038/s41528-018-0045-x · Cited by 332
“87 Further improvements have been achieved by doping QDs with metallic impurities (e.g. Mn2+ doping of CdS), showing record PCE of 5.42% and PD up to 54.3 W/m2.”
BackgroundInfluentialKoppe, M., Egelhaaf, H., Dennler, G., Scharber, M. C., Brabec, C. J., Schilinsky, P., & Hoth, C. N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901473 · Cited by 333
Self-citationLiu, T., Huo, L., Chandrabose, S., Chen, K., Han, G., Qi, F., Meng, X., Xie, D., Ma, W., Yi, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707353 · Cited by 331
Solak, E. K., & Irmak, E. (2023) · RSC Advances · doi:10.1039/d3ra01454a · Cited by 328
Würfel, U., Neher, D., Spies, A., & Albrecht, S. (2015) · Nature Communications · doi:10.1038/ncomms7951 · Cited by 328
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Takacs, C. J., Sun, Y., Welch, G. C., Perez, L. A., Liu, X., Wen, W., Bazan, G. C., & Heeger, A. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3050713 · Cited by 320
Rand, B. P., Cheyns, D., Vasseur, K., Giebink, N. C., Mothy, S., Yi, Y., Coropceanu, V., Beljonne, D., Cornil, J., Brédas, J., et al. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200512 · Cited by 318
Conjugated polymers for high-efficiency organic photovoltaics
Zhan, X., & Zhu, D. (2010) · Polymer Chemistry · doi:10.1039/b9py00325h · Cited by 317
Bi, C., Shao, Y., Yuan, Y., Xiao, Z., Wang, C., Gao, Y., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04007d · Cited by 316
Brunetti, F. G., Gong, X., Tong, M., Heeger, A. J., & Wudl, F. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905117 · Cited by 313
Liu, T., & Troisi, A. (2013) · Advanced Materials · doi:10.1002/adma.201203486 · Cited by 311
Orgiu, E., & Samorì, P. (2014) · Advanced Materials · doi:10.1002/adma.201304695 · Cited by 308
A hybrid bioorganic interface for neuronal photoactivation
Ghezzi, D., Antognazza, M. R., Dal Maschio, M., Lanzarini, E., Benfenati, F., & Lanzani, G. (2011) · Nature Communications · doi:10.1038/ncomms1164 · Cited by 305
Organic Solar Cell Materials toward Commercialization
Xue, R., Zhang, J., Li, Y., & Li, Y. (2018) · Small · doi:10.1002/smll.201801793 · Cited by 304
Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films
Collins, B. A., Cochran, J. E., Yan, H., Gann, E., Hub, C., Fink, R., Wang, C., Schuettfort, T., McNeill, C. R., Chabinyc, M. L., et al. (2012) · Nature Materials · doi:10.1038/nmat3310 · Cited by 302
Morphology of all-polymer solar cells
McNeill, C. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03071c · Cited by 300
Efficiency Enhancement in Organic Photovoltaic Cells: Consequences of Optimizing Series Resistance
Servaites, J. D., Yeganeh, S., Marks, T. J., & Ratner, M. A. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901107 · Cited by 295
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Photovoltaic manufacturing: Present status, future prospects, and research needs
Wolden, C. A., Kurtin, J., Baxter, J. B., Repins, I., Shaheen, S. E., Torvik, J. T., Rockett, A. A., Fthenakis, V. M., & Aydil, E. S. (2011) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3569757 · Cited by 291
Metadata
- Authors
- Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2010-08-17
- Volume
- 22
- Issue
- 34
- Pages
- 3839-3856
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2084868936
- Cited by
- 2,621
- References
- 159
- FWCI
- 240.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.