The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Open accessAbstract
A hydrogel-dielectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) (PDMS), is adapted for extrusion printing for integrated device fabrication. A lithium-chloride-containing hydrogel printing ink is developed and printed onto treated PDMS with no visible signs of delamination and geometrically scaling resistance under moderate uniaxial tension and fatigue. A variety of designs are demonstrated, including a resistive strain gauge and an ionic cable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2016) · CRC Press eBooks · doi:10.1201/9781315380476 · Cited by 13,921
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Self-citationHumidity fixed points of binary saturated aqueous solutions
Greenspan, L. (1977) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.081a.011 · Cited by 4,001
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
Stretchable, Transparent, Ionic Conductors
Keplinger, C., Sun, J.-Y., Foo, C. C., Rothemund, P., Whitesides, G. M., & Suo, Z. (2013) · Science · doi:10.1126/science.1240228 · Cited by 1,754
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Highly stretchable electroluminescent skin for optical signaling and tactile sensing
Larson, C., Peele, B., Li, S., Robinson, S., Totaro, M., Beccai, L., Mazzolai, B., & Shepherd, R. (2016) · Science · doi:10.1126/science.aac5082 · Cited by 1,393
Sun, J., Keplinger, C., Whitesides, G. M., & Suo, Z. (2014) · Advanced Materials · doi:10.1002/adma.201403441 · Cited by 1,198
Self-citationElectronic dura mater for long-term multimodal neural interfaces
Minev, I. R., Musienko, P., Hirsch, A., Barraud, Q., Wenger, N., Moraud, E. M., Gandar, J., Capogrosso, M., Milekovic, T., Asboth, L., et al. (2015) · Science · doi:10.1126/science.1260318 · Cited by 1,082
Self-citation3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Stretchable gold conductors on elastomeric substrates
Lacour, S. P., Wagner, S., Huang, Z., & Suo, Z. (2003) · Applied Physics Letters · doi:10.1063/1.1565683 · Cited by 885
Self-citation3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Highly Sensitive Skin‐Mountable Strain Gauges Based Entirely on Elastomers
Lu, N., Lu, C., Yang, S., & Rogers, J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200498 · Cited by 825
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Hierarchically buckled sheath-core fibers for superelastic electronics, sensors, and muscles
Liu, Z. F., Fang, S., Moura, F. A., Ding, J. N., Jiang, N., Di, J., Zhang, M., Lepró, X., Galvão, D. S., Haines, C. S., et al. (2015) · Science · doi:10.1126/science.aaa7952 · Cited by 529
Fabrication of bulk heterojunction plastic solar cells by screen printing
Shaheen, S. E., Radspinner, R., Peyghambarian, N., & Jabbour, G. E. (2001) · Applied Physics Letters · doi:10.1063/1.1413501 · Cited by 479
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Oxygen plasma treatment for reducing hydrophobicity of a sealed polydimethylsiloxane microchannel
Tan, S. H., Nguyen, N.-T., Chua, Y. C., & Kang, T. G. (2010) · Biomicrofluidics · doi:10.1063/1.3466882 · Cited by 440
Hybrid Hydrogels with Extremely High Stiffness and Toughness
Li, J., Illeperuma, W. R. K., Suo, Z., & Vlassak, J. J. (2014) · ACS Macro Letters · doi:10.1021/mz5002355 · Cited by 437
Self-citation3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt
Bai, Y., Chen, B., Xiang, F., Zhou, J., Wang, H., & Suo, Z. (2014) · Applied Physics Letters · doi:10.1063/1.4898189 · Cited by 383
Self-citationIonic liquids as solvents for polymerization processes—Progress and challenges
Kubisa, P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.001 · Cited by 375
Application of Screen Printing in the Fabrication of Organic Light-Emitting Devices
Pardo, D. A., Jabbour, G. E., & Peyghambarian, N. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1249::aid-adma1249>3.0.co;2-y · Cited by 372
Alginates: Biology and Applications
(2009) · Microbiology Monographs · doi:10.1007/978-3-540-92679-5 · Cited by 354
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Self-citationUV/ozone modification of poly(dimethylsiloxane) microfluidic channels
Berdichevsky, Y., Khandurina, J., Guttman, A., & Lo, Y.-H. (2004) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2003.09.022 · Cited by 318
High ductility of a metal film adherent on a polymer substrate
Xiang, Y., Li, T., Suo, Z., & Vlassak, J. J. (2005) · Applied Physics Letters · doi:10.1063/1.2108110 · Cited by 306
Self-citationDirect‐Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Barry, R. A., Shepherd, R. F., Hanson, J. N., Nuzzo, R. G., Wiltzius, P., & Lewis, J. A. (2009) · Advanced Materials · doi:10.1002/adma.200803702 · Cited by 295
Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
An introduction to aqueous electrolyte solutions
(2007) · Choice Reviews Online · doi:10.5860/choice.45-2043 · Cited by 261
Chen, B., Lu, J. J., Yang, C. H., Yang, J. H., Zhou, J., Chen, Y. M., & Suo, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501130t · Cited by 259
Self-citationYang, C. H., Chen, B., Lu, J. J., Yang, J. H., Zhou, J., Chen, Y. M., & Suo, Z. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.03.001 · Cited by 221
Self-citationStretchable Ferroelectric Nanoribbons with Wavy Configurations on Elastomeric Substrates
Feng, X., Yang, B. D., Liu, Y., Wang, Y., Dagdeviren, C., Liu, Z., Carlson, A., Li, J., Huang, Y., & Rogers, J. A. (2011) · ACS Nano · doi:10.1021/nn200477q · Cited by 219
Hermansson, A.-M., Eriksson, E., & Jordansson, E. (1991) · Carbohydrate Polymers · doi:10.1016/0144-8617(91)90115-s · Cited by 217
Mechanics of stretchable electronics and soft machines
Suo, Z. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.32 · Cited by 216
Self-citationWearable Organic Optoelectronic Sensors for Medicine
Bansal, A. K., Hou, S., Kulyk, O., Bowman, E. M., & Samuel, I. D. W. (2015) · Advanced Materials · doi:10.1002/adma.201403560 · Cited by 205
Lmberis, A., & Dittmar, A. (2007) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/memb.2007.364926 · Cited by 194
Extrusion printing of ionic–covalent entanglement hydrogels with high toughness
Bakarich, S. E., Panhuis, M. I. H., Beirne, S., Wallace, G. G., & Spinks, G. M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21159b · Cited by 177
Self-citationPrint your own membrane: direct rapid prototyping of polydimethylsiloxane
Femmer, T., Kuehne, A. J. C., & Wessling, M. (2014) · Lab on a Chip · doi:10.1039/c4lc00320a · Cited by 161
Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense
Robinson, S. S., O’Brien, K. W., Zhao, H., Peele, B. N., Larson, C. M., Murray, B. C. M., Meerbeek, I. M. V., Dunham, S. N., & Shepherd, R. F. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.09.005 · Cited by 158
Soft wearable motion sensing suit for lower limb biomechanics measurements
Mengüç, Y., Park, Y., Martinez-Villalpando, E. C., Aubin, P. M., Zisook, M., Stirling, L., Wood, R. J., & Walsh, C. J. (2013) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2013.6631337 · Cited by 155
The Stability of Radio-Frequency Plasma-Treated Polydimethylsiloxane Surfaces
Chen, I.-J., & Lindner, E. (2007) · Langmuir · doi:10.1021/la0627720 · Cited by 123
The Effect of Ions on the Kinetics of Formation and the Stability of the Collagen-Fold*
von Hippel, P. H., & Wong, K.-Y. (1962) · Biochemistry · doi:10.1021/bi00910a020 · Cited by 122
Stimuli-responsive buckling mechanics of polymer films
Chen, D., Yoon, J., Chandra, D., Crosby, A. J., & Hayward, R. C. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23590 · Cited by 116
Yabu, H., Nagamine, K., Kamei, J., Saito, Y., Okabe, T., Shimazaki, T., & Nishizawa, M. (2015) · RSC Advances · doi:10.1039/c5ra18063e · Cited by 17
Cited by
Yuk, H., Lu, B., & Zhao, X. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00595h · Cited by 2,108
Yang, C., & Suo, Z. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0018-7 · Cited by 1,709
Self-citationAdvances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Hydrogel Adhesion: A Supramolecular Synergy of Chemistry, Topology, and Mechanics
Yang, J., Bai, R., Chen, B., & Suo, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901693 · Cited by 1,033
Self-citationA review on the recent advances in hybrid supercapacitors
Chatterjee, D. P., & Nandi, A. K. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02505h · Cited by 1,016
Metadata
- Authors
- Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-01-11
- Volume
- 29
- Issue
- 10
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2575293414
- Cited by
- 419
- References
- 49
- FWCI
- 21.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.