The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
3D Printed Stretchable Tactile Sensors
Open accessAbstract
The development of methods for the 3D printing of multifunctional devices could impact areas ranging from wearable electronics and energy harvesting devices to smart prosthetics and human–machine interfaces. Recently, the development of stretchable electronic devices has accelerated, concomitant with advances in functional materials and fabrication processes. In particular, novel strategies have been developed to enable the intimate biointegration of wearable electronic devices with human skin in ways that bypass the mechanical and thermal restrictions of traditional microfabrication technologies. Here, a multimaterial, multiscale, and multifunctional 3D printing approach is employed to fabricate 3D tactile sensors under ambient conditions conformally onto freeform surfaces. The customized sensor is demonstrated with the capabilities of detecting and differentiating human movements, including pulse monitoring and finger motions. The custom 3D printing of functional materials and devices opens new routes for the biointegration of various sensors in wearable electronics systems, and toward advanced bionic skin applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Jones, W. M. (1981) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(81)80036-5 · Cited by 11,092
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Pursuing prosthetic electronic skin
Chortos, A., Liu, J., & Bao, Z. (2016) · Nature Materials · doi:10.1038/nmat4671 · Cited by 2,396
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,314
Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin
Xu, S., Zhang, Y., Jia, L., Mathewson, K. E., Jang, K.-I., Kim, J., Fu, H., Huang, X., Chava, P., Wang, R., et al. (2014) · Science · doi:10.1126/science.1250169 · Cited by 1,199
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Self-citationA review of vapor grown carbon nanofiber/polymer conductive composites
Al-Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.039 · Cited by 1,087
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Self-citationPrintable elastic conductors with a high conductivity for electronic textile applications
Matsuhisa, N., Kaltenbrunner, M., Yokota, T., Jinno, H., Kuribara, K., Sekitani, T., & Someya, T. (2015) · Nature Communications · doi:10.1038/ncomms8461 · Cited by 869
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Self-citationDirect Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites
Boland, C. S., Khan, U., Ryan, G., Barwich, S., Charifou, R., Harvey, A., Backes, C., Li, Z., Ferreira, M. S., Möbius, M. E., et al. (2016) · Science · doi:10.1126/science.aag2879 · Cited by 823
Bioprinting of 3D convoluted renal proximal tubules on perfusable chips
Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A. (2016) · Scientific Reports · doi:10.1038/srep34845 · Cited by 699
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Flexible suspended gate organic thin-film transistors for ultra-sensitive pressure detection
Zang, Y., Zhang, F., Huang, D., Gao, X., Di, C.-A., & Zhu, D. (2015) · Nature Communications · doi:10.1038/ncomms7269 · Cited by 548
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Self-citationPrinted Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
FEATURE ARTICLE Conducting Polymer Composites
stru¨mpler, R., & Glatz-Reichenbach, J. (1999) · Journal of Electroceramics · doi:10.1023/a:1009909812823 · Cited by 424
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Evaluation of biomechanical properties of human skin
Edwards, C., & Marks, R. (1995) · Clinics in Dermatology · doi:10.1016/0738-081x(95)00078-t · Cited by 383
Jang, K.-I., Han, S. Y., Xu, S., Mathewson, K. E., Zhang, Y., Jeong, J.-W., Kim, G.-T., Webb, R. C., Lee, J. W., Dawidczyk, T. J., et al. (2014) · Nature Communications · doi:10.1038/ncomms5779 · Cited by 383
Silver Nanowires: From Scalable Synthesis to Recyclable Foldable Electronics
Yang, C., Gu, H., Lin, W., Yuen, M. M., Wong, C. P., Xiong, M., & Gao, B. (2011) · Advanced Materials · doi:10.1002/adma.201100530 · Cited by 346
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Xu, B., Akhtar, A., Liu, Y., Chen, H., Yeo, W., Park, S. I., Boyce, B., Kim, H., Yu, J., Lai, H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504155 · Cited by 304
Self-citation3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Self-citationThree-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems
Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203
Self-citation3D printed nervous system on a chip
Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W., & McAlpine, M. C. (2016) · Lab on a Chip · doi:10.1039/c5lc01270h · Cited by 191
Self-citation3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
Self-citationModel of the viscoelastic behaviour of skin in vivo and study of anisotropy
Khatyr, F., Imberdis, C., Vescovo, P., Varchon, D., & Lagarde, J. (2004) · Skin Research and Technology · doi:10.1111/j.1600-0846.2004.00057.x · Cited by 189
Xu, L., Gutbrod, S. R., Ma, Y., Petrossians, A., Liu, Y., Webb, R. C., Fan, J. A., Yang, Z., Xu, R., Whalen, J. J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405017 · Cited by 173
Kong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 148
Self-citation3D printing of a multifunctional nanocomposite helical liquid sensor
Guo, S., Yang, X., Heuzey, M.-C., & Therriault, D. (2015) · Nanoscale · doi:10.1039/c5nr00278h · Cited by 147
Self-citationDirect-write fabrication of freestanding nanocomposite strain sensors
Farahani, R. D., Dalir, H., Borgne, V. L., Gautier, L., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/8/085502 · Cited by 120
Morissette, S. L., Lewis, J. A., Clem, P. G., et al. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01036.x · Cited by 114
Guo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 111
Self-citationProviding a sense of touch to prosthetic hands
Nghiem, B. T., Sando, I. C., Gillespie, R. B., McLaughlin, B. L., Gerling, G. J., Langhals, N. B., Urbanchek, M. G., & Cederna, P. S. (2015) · Plastic and Reconstructive Surgery · doi:10.1097/prs.0000000000001289 · Cited by 104
Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds
Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. P. (2015) · Advanced Materials · doi:10.1002/adma.201500603 · Cited by 52
McCracken, J. M., Badea, A., Kandel, M. E., Gladman, A. S., Wetzel, D. J., Popescu, G., Lewis, J. A., & Nuzzo, R. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500888 · Cited by 38
Elastomeric skin selection for a fluid‐filled artificial fingertip
Roy, D., Wettels, N., & Loeb, G. E. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38030 · Cited by 15
Hardin, J. O., Ober, T. J., Valentine, A. D., et al. (2015) · Advanced Materials · doi:10.1002/adma.201570145 · Cited by 13
Cited by
Yang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Metadata
- Authors
- Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-05-05
- Volume
- 29
- Issue
- 27
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2611333474
- Cited by
- 445
- References
- 53
- FWCI
- 19.44
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.