The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
Nanolattices: An Emerging Class of Mechanical Metamaterials
Open accessAbstract
In 1903, Alexander Graham Bell developed a design principle to generate lightweight, mechanically robust lattice structures based on triangular cells; this has since found broad application in lightweight design. Over one hundred years later, the same principle is being used in the fabrication of nanolattice materials, namely lattice structures composed of nanoscale constituents. Taking advantage of the size‐dependent properties typical of nanoparticles, nanowires, and thin films, nanolattices redefine the limits of the accessible material‐property space throughout different disciplines. Herein, the exceptional mechanical performance of nanolattices, including their ultrahigh strength, damage tolerance, and stiffness, are reviewed, and their potential for multifunctional applications beyond mechanics is examined. The efficient integration of architecture and size‐affected properties is key to further develop nanolattices. The introduction of a hierarchical architecture is an effective tool in enhancing mechanical properties, and the eventual goal of nanolattice design may be to replicate the intricate hierarchies and functionalities observed in biological materials. Additive manufacturing and self‐assembly techniques enable lattice design at the nanoscale; the scaling‐up of nanolattice fabrication is currently the major challenge to their widespread use in technological applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Whitesides, G. M., & Grzybowski, B. (2002) · Science · doi:10.1126/science.1070821 · Cited by 7,439
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Locally Resonant Sonic Materials
Liu, Z., Zhang, X., Mao, Y., Zhu, Y. Y., Yang, Z., Chan, C. T., & Sheng, P. (2000) · Science · doi:10.1126/science.289.5485.1734 · Cited by 5,464
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Hall–Petch relation and boundary strengthening
Hansen, N. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.06.002 · Cited by 3,799
Mechanical Behavior of Materials
Meyers, M. A., & Chawla, K. K. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810947 · Cited by 3,376
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Poisson's ratio and modern materials
Greaves, G. N., Greer, A. L., Lakes, R. S., & Rouxel, T. (2011) · Nature Materials · doi:10.1038/nmat3134 · Cited by 2,362
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Self-citationThe Diatoms. Biology and Morphology of the Genera
Christensen, T. (1991) · Phycologia · doi:10.2216/i0031-8884-30-2-233.1 · Cited by 2,031
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Self-citationPlasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Soukoulis, C. M., & Wegener, M. (2011) · Nature Photonics · doi:10.1038/nphoton.2011.154 · Cited by 1,703
Hussein, M. I., Leamy, M. J., & Ruzzene, M. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026911 · Cited by 1,698
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Self-citationLow-Temperature Al2O3 Atomic Layer Deposition
Groner, M. D., Fabreguette, F. H., Elam, J. W., & George, S. M. (2004) · Chemistry of Materials · doi:10.1021/cm0304546 · Cited by 1,403
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
LVIII. The limits of economy of material in frame-structures
Michell, A. G. M. (1904) · The London Edinburgh and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440409463229 · Cited by 1,390
Nanocasting: A Versatile Strategy for Creating Nanostructured Porous Materials
Lu, A. ‐., & Schüth, F. (2006) · Advanced Materials · doi:10.1002/adma.200600148 · Cited by 1,321
Three-Dimensional Invisibility Cloak at Optical Wavelengths
Ergin, T., Stenger, N., Brenner, P., Pendry, J. B., & Wegener, M. (2010) · Science · doi:10.1126/science.1186351 · Cited by 1,248
Sound and heat revolutions in phononics
Maldovan, M. (2013) · Nature · doi:10.1038/nature12608 · Cited by 1,241
Size effects in materials due to microstructural and dimensional constraints: a comparative review
Arzt, E. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00231-6 · Cited by 1,180
Skeleton of Euplectella sp.: Structural Hierarchy from the Nanoscale to the Macroscale
Aizenberg, J., Weaver, J. C., Thanawala, M. S., Sundar, V. C., Morse, D. E., & Fratzl, P. (2005) · Science · doi:10.1126/science.1112255 · Cited by 1,144
Bones: Structure and Mechanics
Currey, J. D. (2002) · Cited by 1,125
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Self-citationDesign of materials with extreme thermal expansion using a three-phase topology optimization method
Sigmund, O., & Torquato, S. (1997) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(96)00114-7 · Cited by 1,054
Bones: Structure and Mechanics
Currey, J. D. (2002) · Princeton University Press eBooks · doi:10.1515/9781400849505 · Cited by 1,000
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Architecture and material properties of diatom shells provide effective mechanical protection
Hamm, C. E., Merkel, R., Springer, O., Jurkojc, P., Maier, C., Prechtel, K., & Smetacek, V. (2003) · Nature · doi:10.1038/nature01416 · Cited by 956
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Three-dimensional printing of transparent fused silica glass
Kotz, F., Arnold, K., Bauer, W., Schild, D., Keller, N., Sachsenheimer, K., Nargang, T. M., Richter, C., Helmer, D., & Rapp, B. E. (2017) · Nature · doi:10.1038/nature22061 · Cited by 876
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Self-citationWolff, J. (1986) · Springer eBooks · doi:10.1007/978-3-642-71031-5 · Cited by 802
Mechanical behavior of materials
(2009) · Choice Reviews Online · doi:10.5860/choice.46-6830 · Cited by 737
Jang, D., & Greer, J. R. (2010) · Nature Materials · doi:10.1038/nmat2622 · Cited by 722
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
Self-citationApproaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Self-citationRicherson, D. W. (2005) · CRC Press eBooks · doi:10.1201/b18952 · Cited by 685
Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography
Bückmann, T., Stenger, N., Kadic, M., Kaschke, J., Frölich, A., Kennerknecht, T., Eberl, C., Thiel, M., & Wegener, M. (2012) · Advanced Materials · doi:10.1002/adma.201200584 · Cited by 665
Three Decades of Auxetics Research − Materials with Negative Poisson's Ratio: A Review
Saxena, K. K., Das, R. K., & Calius, E. P. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600053 · Cited by 639
An elasto-mechanical unfeelability cloak made of pentamode metamaterials
Bückmann, T., Thiel, M., Kadic, M., Schittny, R., & Wegener, M. (2014) · Nature Communications · doi:10.1038/ncomms5130 · Cited by 623
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
Self-citationMicro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
On the practicability of pentamode mechanical metamaterials
Kadic, M., Bückmann, T., Stenger, N., Thiel, M., & Wegener, M. (2012) · Applied Physics Letters · doi:10.1063/1.4709436 · Cited by 556
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Orilall, M. C., & Wiesner, U. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00034e · Cited by 520
Which Elasticity Tensors are Realizable?
Milton, G. W., & Cherkaev, A. V. (1995) · Journal of Engineering Materials and Technology · doi:10.1115/1.2804743 · Cited by 513
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
A Bicontinuous Double Gyroid Hybrid Solar Cell
Crossland, E. J. W., Kamperman, M., Nedelcu, M., Ducati, C., Wiesner, U., Smilgies, D. M., Toombes, G. E. S., Hillmyer, M. A., Ludwigs, S., Steiner, U., et al. (2009) · Nano Letters · doi:10.1021/nl803174p · Cited by 490
Overvelde, J. T. B., de Jong, T. A., Shevchenko, Y., Becerra, S. A., Whitesides, G. M., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2016) · Nature Communications · doi:10.1038/ncomms10929 · Cited by 482
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Modern ceramic engineering: properties, processing and use in design
West, G. (1994) · Composites Manufacturing · doi:10.1016/0956-7143(94)90021-3 · Cited by 444
Tailored Buckling Microlattices as Reusable Light‐Weight Shock Absorbers
Frenzel, T., Findeisen, C., Kadic, M., Gumbsch, P., & Wegener, M. (2016) · Advanced Materials · doi:10.1002/adma.201600610 · Cited by 432
Plasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
Mechanical strength of abalone nacre: Role of the soft organic layer
Meyers, M. A., Lin, A. Y.-M., Chen, P.-Y., & Muyco, J. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.03.001 · Cited by 427
Diatomaceous Lessons in Nanotechnology and Advanced Materials
Losic, D., Mitchell, J. G., & Voelcker, N. H. (2009) · Advanced Materials · doi:10.1002/adma.200803778 · Cited by 414
Mechanical response of Ti–6Al–4V octet-truss lattice structures
Dong, L., Deshpande, V. S., & Wadley, H. N. G. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.02.020 · Cited by 408
Phase transforming cellular materials
Restrepo, D., Mankame, N. D., & Zavattieri, P. D. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.08.001 · Cited by 390
Scaling equation for yield strength of nanoporous open-cell foams
Hodge, A. M., Biener, J., Hayes, J. R., Bythrow, P. M., Volkert, C. A., & Hamza, A. V. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.09.038 · Cited by 364
Three‐Dimensional Nanostructures for Photonics
von Freymann, G., Ledermann, A., Thiel, M., Staude, I., Essig, S., Busch, K., & Wegener, M. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901838 · Cited by 352
Ordered Bicontinuous Nanoporous and Nanorelief Ceramic Films from Self Assembling Polymer Precursors
Chan, V. Z.-H., Hoffman, J., Lee, V. Y., Iatrou, H., Avgeropoulos, A., Hadjichristidis, N., Miller, R. D., & Thomas, E. L. (1999) · Science · doi:10.1126/science.286.5445.1716 · Cited by 346
Direct laser writing: Principles and materials for scaffold 3D printing
Selimis, A., Mironov, V., & Farsari, M. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2014.10.001 · Cited by 344
Two‐Component Polymer Scaffolds for Controlled Three‐Dimensional Cell Culture
Klein, F., Richter, B., Striebel, T., Franz, C. M., Freymann, G. V., Wegener, M., & Bastmeyer, M. (2011) · Advanced Materials · doi:10.1002/adma.201004060 · Cited by 334
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Modeling of Thermal Transport in Pillared-Graphene Architectures
Varshney, V., Patnaik, S. S., Roy, A. K., Froudakis, G., & Farmer, B. L. (2010) · ACS Nano · doi:10.1021/nn901341r · Cited by 316
Fischer, J., & Wegener, M. (2011) · Optical Materials Express · doi:10.1364/ome.1.000614 · Cited by 305
Size-Dependent Resistivity in Nanoscale Interconnects
Josell, D., Brongersma, S. H., & Tőkei, Z. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145415 · Cited by 286
Vitreous carbon — A new form of carbon
Cowlard, F. C., & Lewis, J. C. (1967) · Journal of Materials Science · doi:10.1007/bf00752216 · Cited by 273
Zheng, X., Deotte, J., Alonso, M. P., Farquar, G. R., Weisgraber, T. H., Gemberling, S., Lee, H., Fang, N., & Spadaccini, C. M. (2012) · Review of Scientific Instruments · doi:10.1063/1.4769050 · Cited by 267
Self-citationDesign in Nature: Learning from Trees
Mattheck, C. G. (1998) · Medical Entomology and Zoology · Cited by 263
Block Copolymer−Ceramic Hybrid Materials from Organically Modified Ceramic Precursors
Simon, P. F. W., Ulrich, R., Spiess, H. W., & Wiesner, U. (2001) · Chemistry of Materials · doi:10.1021/cm0110674 · Cited by 261
The damage tolerance of elastic–brittle, two-dimensional isotropic lattices
Fleck, N. A., & Qiu, X. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.08.004 · Cited by 260
(1981) · Journal of Constructional Steel Research · doi:10.1016/0143-974x(81)90009-2 · Cited by 254
Peters, C., Hoop, M., Pané, S., Nelson, B. J., & Hierold, C. (2016) · Advanced Materials · doi:10.1002/adma.201503112 · Cited by 243
Architected cellular ceramics with tailored stiffness via direct foam writing
Muth, J. T., Dixon, P. G., Woish, L., Gibson, L. J., & Lewis, J. A. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1616769114 · Cited by 242
Beyond micromachining: the potential of diatoms
Parkinson, J., & Gordon, R. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01321-9 · Cited by 222
Size-dependent thermal conductivity of nanoscale semiconducting systems
Liang, L. H., & Li, B. (2006) · Physical Review B · doi:10.1103/physrevb.73.153303 · Cited by 220
Krämer, E., Förster, S., Göltner, C., & Antonietti, M. (1998) · Langmuir · doi:10.1021/la9712505 · Cited by 215
Torrents, A., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Valdevit, L. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.03.007 · Cited by 212
Self-citationPaul, R. K., Ghazinejad, M., Penchev, M., Lin, J., Ozkan, M., & Ozkan, C. S. (2010) · Small · doi:10.1002/smll.201000525 · Cited by 200
Enhanced Electrochromism in Gyroid‐Structured Vanadium Pentoxide
Scherer, M. R. J., Li, L., Cunha, P. M. S., Scherman, O. A., & Steiner, U. (2012) · Advanced Materials · doi:10.1002/adma.201104272 · Cited by 187
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., Kadic, M., Milton, G. W., & Wegener, M. (2014) · New Journal of Physics · doi:10.1088/1367-2630/16/3/033032 · Cited by 182
Size-Dependent Deformation of Nanocrystalline Pt Nanopillars
Gu, X. W., Loynachan, C. N., Wu, Z., Zhang, Y.-W., Srolovitz, D. J., & Greer, J. R. (2012) · Nano Letters · doi:10.1021/nl3036993 · Cited by 181
Tang, D.-M., Ren, C.-L., Wang, M.-S., Wei, X., Kawamoto, N., Liu, C., Bando, Y., Mitome, M., Fukata, N., & Golberg, D. (2012) · Nano Letters · doi:10.1021/nl204282y · Cited by 174
Micro‐scale Truss Structures formed from Self‐Propagating Photopolymer Waveguides
Jacobsen, A. J., Barvosa‐Carter, W., & Nutt, S. (2007) · Advanced Materials · doi:10.1002/adma.200700797 · Cited by 172
Three‐Dimensional Nanofabrication by Block Copolymer Self‐Assembly
Ross, C. A., Berggren, K. K., Cheng, J. Y., Jung, Y. S., & Chang, J. (2014) · Advanced Materials · doi:10.1002/adma.201400386 · Cited by 171
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Pentamode Metamaterials with Independently Tailored Bulk Modulus and Mass Density
Kadic, M., Bückmann, T., Schittny, R., Gumbsch, P., & Wegener, M. (2014) · Physical Review Applied · doi:10.1103/physrevapplied.2.054007 · Cited by 160
A universal scaling law for the strength of metal micropillars and nanowires
Dou, R., & Derby, B. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.05.012 · Cited by 159
Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148
Valdevit, L., Jacobsen, A. J., Greer, J. R., & Carter, W. B. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04599.x · Cited by 142
Self-citationJiang, L. J., Zhou, Y. S., Xiong, W. H., Gao, Y., Huang, X., Jiang, L., Baldacchini, T., Silvain, J., & Lu, Y. (2014) · Optics Letters · doi:10.1364/ol.39.003034 · Cited by 134
Li, X., & Gao, H. (2016) · Nature Materials · doi:10.1038/nmat4591 · Cited by 134
Prescribing diatom morphology: toward genetic engineering of biological nanomaterials
Kröger, N. (2007) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2007.10.009 · Cited by 130
Elastic measurements on macroscopic three-dimensional pentamode metamaterials
Schittny, R., Bückmann, T., Kadic, M., & Wegener, M. (2013) · Applied Physics Letters · doi:10.1063/1.4838663 · Cited by 128
Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent
Chen, D., Jang, D., Guan, K. M., An, Q., Goddard, W. A., & Greer, J. R. (2013) · Nano Letters · doi:10.1021/nl402384r · Cited by 125
Mieszala, M., Hasegawa, M., Guillonneau, G., Bauer, J., Raghavan, R., Frantz, C., Kraft, O., Mischler, S., Michler, J., & Philippe, L. (2016) · Small · doi:10.1002/smll.201602514 · Cited by 122
Self-citationPeriodic Bicontinuous Composites for High Specific Energy Absorption
Lee, J., Wang, L., Boyce, M. C., & Thomas, E. L. (2012) · Nano Letters · doi:10.1021/nl302234f · Cited by 119
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., et al. (2014) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000042057 · Cited by 117
Super‐Compressibility of Ultralow‐Density Nanoporous Silica
Kucheyev, S. O., Stadermann, M., Shin, S. J., Satcher, J. H., Gammon, S. A., Letts, S. A., van Buuren, T., & Hamza, A. V. (2012) · Advanced Materials · doi:10.1002/adma.201103561 · Cited by 113
Optimal active cooling performance of metallic sandwich panels with prismatic cores
Valdevit, L., Pantano, A., Stone, H. A., & Evans, A. G. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.03.042 · Cited by 111
Self-citationValdevit, L., Godfrey, S. W., Schaedler, T. A., Jacobsen, A. J., & Carter, W. B. (2013) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2013.160 · Cited by 110
Self-citationEnergy dissipation mechanisms in hollow metallic microlattices
Salari‐Sharif, L., Schaedler, T. A., & Valdevit, L. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.226 · Cited by 105
Self-citationCompression behavior of micro-scale truss structures formed from self-propagating polymer waveguides
Jacobsen, A. J., Barvosa-Carter, W., & Nutt, S. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.08.036 · Cited by 99
de Hazan, Y., Heinecke, J., Weber, A. P., et al. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.05.012 · Cited by 96
Fabrication and Structural Analysis of Binary Colloidal Crystals with Two‐Dimensional Superlattices
Kim, M. H., Im, S., & Park, O. O. (2005) · Advanced Materials · doi:10.1002/adma.200501080 · Cited by 96
Computer simulation of mechanical structure–property relationship of aerogels
Ma, H.-S., Prévost, J. H., Jullien, R., & Scherer, G. W. (2001) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(01)00456-2 · Cited by 96
Mechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects
Montemayor, L. C., & Greer, J. R. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4030361 · Cited by 91
Ultimate Bending Strength of Si Nanowires
Stan, G., Krylyuk, S. G., Davydov, A. V., Levin, I., & Cook, R. F. (2012) · Nano Letters · doi:10.1021/nl300957a · Cited by 90
3D direct laser writing using a 405 nm diode laser
Mueller, P., Thiel, M., & Wegener, M. (2014) · Optics Letters · doi:10.1364/ol.39.006847 · Cited by 88
Maloney, K. J., Roper, C. S., Jacobsen, A. J., Carter, W. B., Valdevit, L., & Schaedler, T. A. (2013) · APL Materials · doi:10.1063/1.4818168 · Cited by 82
Self-citationMicro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering
Danilevičius, P., Rekštyte, S., Gadonas, R. A., Malinauskas, M., Balciunas, E., Jarasiene, R., Baltriukiene, D., Bukelskiene, V., Kraniauskas, A., & Sirmenis, R. (2012) · Journal of Biomedical Optics · doi:10.1117/1.jbo.17.8.081405 · Cited by 81
Functionalized 3D Architected Materials via Thiol‐Michael Addition and Two‐Photon Lithography
Yee, D. W., Schulz, M. D., Grubbs, R. H., & Greer, J. R. (2017) · Advanced Materials · doi:10.1002/adma.201605293 · Cited by 73
Vitreous carbon micro-lattice structures
Jacobsen, A. J., Mahoney, S., Carter, W. B., & Nutt, S. (2010) · Carbon · doi:10.1016/j.carbon.2010.10.059 · Cited by 68
2013 Koiter Medal Paper: Crack-Tip Fields and Toughness of Two-Dimensional Elastoplastic Lattices
Tankasala, H. C., Deshpande, V. S., & Fleck, N. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4030666 · Cited by 66
Iron-Doped Carbon Aerogels: Novel Porous Substrates for Direct Growth of Carbon Nanotubes
Steiner, S. A., Baumann, T. F., Kong, J., Satcher, J. H., & Dresselhaus, M. S. (2007) · Langmuir · doi:10.1021/la063643m · Cited by 58
Colour stereolithography for planning complex maxillofacial tumour surgery
Kermer, C., Rasse, M., Lagogiannis, G., Undt, G., Wagner, A., & Millesi, W. (1998) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/s1010-5182(98)80068-1 · Cited by 57
Self‐Assembled Ultra High Strength, Ultra Stiff Mechanical Metamaterials Based on Inverse Opals
do Rosário, J. J., Lilleodden, E. T., Waleczek, M., Kubrin, R., Petrov, A. Y., Дьяченко, П. Н., Sabisch, J. E. C., Nielsch, K., Huber, N. W., Eich, M., et al. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500118 · Cited by 56
Lithographically Defined Porous Carbon Electrodes
Burckel, D. B., Washburn, C. M., Raub, A. K., Brueck, S. R. J., Wheeler, D. R., Brozik, S. M., & Polsky, R. (2009) · Small · doi:10.1002/smll.200901084 · Cited by 51
Bail, R., Patel, A. B., Yang, H., et al. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.044 · Cited by 44
Asadpoure, A., & Valdevit, L. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.01.016 · Cited by 41
Self-citationPlastic Dissipation Mechanisms in Periodic Microframe‐Structured Polymers
Wang, L., Boyce, M. C., Wen, C., & Thomas, E. L. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801483 · Cited by 41
Complex Materials by Atomic Layer Deposition
Schwartzberg, A. M., & Olynick, D. L. (2015) · Advanced Materials · doi:10.1002/adma.201500699 · Cited by 40
Bail, R., Hong, J. Y., & Chin, B. D. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.04.017 · Cited by 40
Functional nanostructured materials based on self-assembly of block copolymers
Bai, W., & Ross, C. A. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.1 · Cited by 37
Lian, J., Jang, D., Valdevit, L., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Greer, J. R. (2011) · Nano Letters · doi:10.1021/nl202475p · Cited by 34
Self-citationMicrolattice Metamaterials for Tailoring Ultrasonic Transmission with Elastoacoustic Hybridization
Krödel, S., & Daraio, C. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.6.064005 · Cited by 30
Mitrofanov, V. V., Slepchenkov, M. M., Zhang, G., et al. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.040 · Cited by 26
Farkas, B., Romano, I., Ceseracciu, L., Diaspro, A., Brandi, F., & Beke, S. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.054 · Cited by 24
Fracture behavior of hydroxyapatite nanofibers in dental enamel under micropillar compression
Yilmaz, E. D., Bechtle, S., Özcoban, H., Schreyer, A. G., & Schneider, G. A. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.11.007 · Cited by 24
Inertial stabilization of flexible polymer micro-lattice materials
Yin, S., Jacobsen, A. J., Wu, L., & Nutt, S. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7452-0 · Cited by 18
Heat conduction in multifunctional nanotrusses studied using Boltzmann transport equation
Dou, N. G., & Minnich, A. J. (2016) · Applied Physics Letters · doi:10.1063/1.4939266 · Cited by 15
Free Form Fabrication of Ceramics Components by Three‐dimensional Stereolithography
Kirihara, S. (2015) · Wiley eBooks · doi:10.1002/9781119100430.ch17 · Cited by 1
Cited by
Kadic, M., Milton, G. W., van Hecke, M., & Wegener, M. (2019) · Nature Reviews Physics · doi:10.1038/s42254-018-0018-y · Cited by 1,106
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Self-citationReview of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Metadata
- Authors
- Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-09-05
- Volume
- 29
- Issue
- 40
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2627046073
- Cited by
- 592
- References
- 156
- FWCI
- 29.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.