The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
Nanolattices: An Emerging Class of Mechanical Metamaterials
Open accessAbstract
In 1903, Alexander Graham Bell developed a design principle to generate lightweight, mechanically robust lattice structures based on triangular cells; this has since found broad application in lightweight design. Over one hundred years later, the same principle is being used in the fabrication of nanolattice materials, namely lattice structures composed of nanoscale constituents. Taking advantage of the size‐dependent properties typical of nanoparticles, nanowires, and thin films, nanolattices redefine the limits of the accessible material‐property space throughout different disciplines. Herein, the exceptional mechanical performance of nanolattices, including their ultrahigh strength, damage tolerance, and stiffness, are reviewed, and their potential for multifunctional applications beyond mechanics is examined. The efficient integration of architecture and size‐affected properties is key to further develop nanolattices. The introduction of a hierarchical architecture is an effective tool in enhancing mechanical properties, and the eventual goal of nanolattice design may be to replicate the intricate hierarchies and functionalities observed in biological materials. Additive manufacturing and self‐assembly techniques enable lattice design at the nanoscale; the scaling‐up of nanolattice fabrication is currently the major challenge to their widespread use in technological applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Whitesides, G. M., & Grzybowski, B. (2002) · Science · doi:10.1126/science.1070821 · Cited by 7,439
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Locally Resonant Sonic Materials
Liu, Z., Zhang, X., Mao, Y., Zhu, Y. Y., Yang, Z., Chan, C. T., & Sheng, P. (2000) · Science · doi:10.1126/science.289.5485.1734 · Cited by 5,464
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Cited by
Kadic, M., Milton, G. W., van Hecke, M., & Wegener, M. (2019) · Nature Reviews Physics · doi:10.1038/s42254-018-0018-y · Cited by 1,106
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Self-citationReview of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Scalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 491
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Self-citationAdditive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Inverse-designed spinodoid metamaterials
Kumar, S., Tan, S., Zheng, L., & Kochmann, D. M. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0341-6 · Cited by 444
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Vibration control based metamaterials and origami structures: A state-of-the-art review
Ji, J. C., Luo, Q., & Ye, K. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107945 · Cited by 386
Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design
Zheng, X., Zhang, X., Chen, T., & Watanabe, I. (2023) · Advanced Materials · doi:10.1002/adma.202302530 · Cited by 372
Self-citationArchitected Origami Materials: How Folding Creates Sophisticated Mechanical Properties
Li, S., Fang, H., Sadeghi, S., Bhovad, P., & Wang, K. (2019) · Advanced Materials · doi:10.1002/adma.201805282 · Cited by 320
Responsive materials architected in space and time
Xia, X., Spadaccini, C. M., & Greer, J. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00450-z · Cited by 295
Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
Hahn, V., Kiefer, P., Frenzel, T., Qu, J., Blasco, E., Barner‐Kowollik, C., & Wegener, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907795 · Cited by 285
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W., & Lee, H. (2019) · Materials Horizons · doi:10.1039/c9mh00302a · Cited by 284
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
Harinarayana, V., & Shin, Y. C. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107180 · Cited by 259
Designing electromechanical metamaterial with full nonzero piezoelectric coefficients
Yang, J., Li, Z., Xin, X., Gao, X., Yuan, X., Wang, Z., Yu, Z., Wang, X., Zhou, J., & Dong, S. (2019) · Science Advances · doi:10.1126/sciadv.aax1782 · Cited by 94
Ceramic paste for space stereolithography 3D printing technology in microgravity environment
Dou, R., Tang, W., Hu, K., & Wang, L. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.03.030 · Cited by 49
Metadata
- Authors
- Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-09-05
- Volume
- 29
- Issue
- 40
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2627046073
- Cited by
- 592
- References
- 156
- FWCI
- 29.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.