The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
A Scalable, High‐Throughput, and Environmentally Benign Approach to Polymer Dielectrics Exhibiting Significantly Improved Capacitive Performance at High Temperatures
Abstract
High‐temperature capability is critical for polymer dielectrics in the next‐generation capacitors demanded in harsh‐environment electronics and electrical‐power applications. It is well recognized that the energy‐storage capabilities of dielectrics are degraded drastically with increasing temperature due to the exponential increase of conduction loss. Here, a general and scalable method to enable significant improvement of the high‐temperature capacitive performance of the current polymer dielectrics is reported. The high‐temperature capacitive properties in terms of discharged energy density and the charge–discharge efficiency of the polymer films coated with SiO 2 via plasma‐enhanced chemical vapor deposition significantly outperform the neat polymers and rival or surpass the state‐of‐the‐art high‐temperature polymer nanocomposites that are prepared by tedious and low‐throughput methods. Moreover, the surface modification of the dielectric films is carried out in conjunction with fast‐throughput roll‐to‐roll processing under ambient conditions. The entire fabrication process neither involves any toxic chemicals nor generates any hazardous by‐products. The integration of excellent performance, versatility, high productivity, low cost, and environmental friendliness in the present method offers an unprecedented opportunity for the development of scalable high‐temperature polymer dielectrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Resolution X-Ray Photoemission Spectrum of the Valence Bands of Gold
Shirley, D. A. (1972) · Physical Review B · doi:10.1103/physrevb.5.4709 · Cited by 6,231
Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications
Kogelschatz, U. (2003) · Plasma Chemistry and Plasma Processing · doi:10.1023/a:1022470901385 · Cited by 3,193
A Dielectric Polymer with High Electric Energy Density and Fast Discharge Speed
Chu, B., Zhou, X., Ren, K., Neese, B., Lin, M., Wang, Q., Bauer, F., & Zhang, Q. M. (2006) · Science · doi:10.1126/science.1127798 · Cited by 2,453
Self-citationNonnenmacher, M., O’Boyle, M. P., & Wickramasinghe, H. K. (1991) · Applied Physics Letters · doi:10.1063/1.105227 · Cited by 2,343
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Self-citationBand offsets of wide-band-gap oxides and implications for future electronic devices
Robertson, J. (2000) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.591472 · Cited by 2,049
A Review on Conduction Mechanisms in Dielectric Films
Chiu, F.-C. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/578168 · Cited by 1,574
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
Physical Properties of Composites Near Percolation
Nan, C.-W., Shen, Y., & Ma, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104529 · Cited by 1,009
High-Temperature Dielectric Materials for Electrical Energy Storage
Li, Q., Yao, F.-Z., Liu, Y., Zhang, G., Wang, H., & Wang, Q. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070317-124435 · Cited by 881
Self-citationThe Changing Automotive Environment: High-Temperature Electronics
Johnson, R. W., Evans, J. L., Jacobsen, P., Thompson, J. R. R., & Christopher, M. (2004) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2004.843109 · Cited by 869
Exploring Strategies for High Dielectric Constant and Low Loss Polymer Dielectrics
Zhu, L. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501831q · Cited by 763
Status quo and future prospects for metallized polypropylene energy storage capacitors
Rabuffi, M., & Picci, G. (2002) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2002.805318 · Cited by 683
Li, Q., Zhang, G., Liu, F., Han, K., Gadinski, M. R., Xiong, C., & Wang, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02962c · Cited by 645
Self-citationKim, P., Jones, S. C., Hotchkiss, P. J., Haddock, J. N., Kippelen, B., Marder, S. R., & Perry, J. W. (2007) · Advanced Materials · doi:10.1002/adma.200602422 · Cited by 601
Azizi, A., Gadinski, M. R., Li, Q., AlSaud, M. A., Wang, J., Wang, Y., Wang, B., Liu, F., Chen, L., Alem, N., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701864 · Cited by 392
Self-citationLi, Q., Liu, F., Yang, T., Gadinski, M. R., Zhang, G., Chen, L.-Q., & Wang, Q. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1603792113 · Cited by 382
Self-citationAtmospheric plasmas for thin film deposition: A critical review
Merche, D., Vandencasteele, N., & Reniers, F. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.01.026 · Cited by 325
Yang, H., Yan, F., Lin, Y., Wang, T., Wang, F., Wang, Y., Guo, L., Tai, W., & Wei, H. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.071 · Cited by 322
Electrical Conduction and Carrier Traps in Polymeric Materials
Ieda, M. (1984) · IEEE Transactions on Electrical Insulation · doi:10.1109/tei.1984.298741 · Cited by 312
Roy, S. L., Segur, P., Teyssedre, G., & Laurent, C. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/2/020 · Cited by 242
A model for bipolar charge transport, trapping and recombination in degassed crosslinked polyethene
Alison, J. M., & Hill, R. M. (1994) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/27/6/029 · Cited by 233
Cited by
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Dielectric polymers for high-temperature capacitive energy storage
Li, H., Zhou, Y., Liu, Y., Li, L., Liu, Y., & Wang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00765j · Cited by 713
Self-citationYuan, C., Zhou, Y., Zhu, Y., Liang, J., Wang, S., Peng, S., Li, Y., Cheng, S., Yang, M., Hu, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17760-x · Cited by 690
Self-citationPolymer nanocomposite dielectrics for capacitive energy storage
Yang, M., Guo, M., Xu, E., Ren, W., Wang, D., Li, S., Zhang, S., Nan, C.-W., & Shen, Y. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01541-w · Cited by 423
Interface-modulated nanocomposites based on polypropylene for high-temperature energy storage
Zhou, Y., Yuan, C., Wang, S., Zhu, Y., Cheng, S., Yang, X., Yang, Y., Hu, J., He, J., & Li, Q. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.03.017 · Cited by 344
Self-citation
Metadata
- Authors
- Zhou, Y., Li, Q., Dang, B., Yang, Y., Shao, T., Li, H., Hu, J., Zeng, R., He, J., & Wang, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-10-03
- Volume
- 30
- Issue
- 49
- Pages
- e1805672-e1805672
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2895345989
- Cited by
- 489
- References
- 22
- FWCI
- 11.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.