The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Extended Electrochemical Window of Solid Electrolytes via Heterogeneous Multilayered Structure for High‐Voltage Lithium Metal Batteries
Abstract
In response to the call for safer high‐energy‐density storage systems, high‐voltage solid‐state Li metal batteries have attracted extensive attention. Therefore, solid electrolytes are required to be stable against both Li anode and high‐voltage cathodes; nevertheless, the requirements still cannot be completely satisfied. Herein, a heterogeneous multilayered solid electrolyte (HMSE) is proposed to broaden electrochemical window of solid electrolytes to 0–5 V, through different electrode/electrolyte interfaces to overcome the interfacial instability problems. Oxidation‐resistance poly(acrylonitrile) (PAN) is in contact with the cathode, while reduction tolerant polyethylene glycol diacrylate contacts with Li metal anode. A Janus and flexible PAN@Li 1.4 Al 0.4 Ge 1.6(PO 4)3 (80 wt%) composite electrolyte is designed as intermediate layer to inhibit dendrite penetration and ensure compact interface. Paired with LiNi 0.6 Co 0.2 Mn 0.2 O 2 and LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes, which are rarely used in solid‐state batteries, the solid‐state Li metal batteries with HMSE exhibit excellent electrochemical performance including high capacity and long cycle life. Besides, the Li||Li symmetric batteries maintain a stable polarization less than 40 mV for more than 1000 h under 2 mA cm−2 and effective inhibition of dendrite formation. This study offers a promising approach to extend the applications of solid electrolytes for high‐voltage solid‐state Li metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Self-citationBachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Self-citationReview of gel-type polymer electrolytes for lithium-ion batteries
Song, J. Y., Wang, Y. Y., & Wan, C. C. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00193-1 · Cited by 1,491
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes
Han, F., Zhu, Y., He, X., Mo, Y., & Wang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501590 · Cited by 1,095
Zhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Grande, L., Paillard, E., Hassoun, J., Park, J., Lee, Y., Sun, Y., Passerini, S., & Scrosati, B. (2015) · Advanced Materials · doi:10.1002/adma.201403064 · Cited by 618
Huang, Y., Zhong, M., Shi, F., Liu, X., Tang, Z., Wang, Y., Huang, Y., Hou, H., Xie, X., & Zhi, C. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705212 · Cited by 563
Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries
Liu, F.-Q., Wang, W.-P., Yin, Y.-X., Zhang, S.-F., Shi, J.-L., Wang, L., Zhang, X.-D., Zheng, Y., Zhou, J.-J., Li, L., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat5383 · Cited by 556
Self-citationHartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Self-citationChen, S., Wen, K., Fan, J., Bando, Y., & Golberg, D. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03358g · Cited by 367
Dong, T., Zhang, J., Xu, G., Chai, J., Du, H., Wang, L., Wen, H., Zang, X., Du, A., Jia, Q., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03365f · Cited by 343
Zhang, X., Jiang, J., Shen, Z., Dan, Z., Li, M., Lin, Y., Nan, C., Chen, L., & Shen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201707269 · Cited by 322
Yang, C., Xie, H., Ping, W., Fu, K., Liu, B., Rao, J., Dai, J., Wang, C., Pastel, G., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201804815 · Cited by 317
Yang, L., Wang, Z., Feng, Y., Tan, R. Q., Zuo, Y., Gao, R., Zhao, Y., Han, L., Wang, Z., & Pan, F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701437 · Cited by 310
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T., McOwen, D., Dai, J., Luo, W., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 303
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Duan, H., Yin, Y.-X., Zeng, X.-X., Li, J.-Y., Shi, J.-L., Shi, Y., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.017 · Cited by 260
Self-citationLiang, J.-Y., Zeng, X.-X., Zhang, X.-D., Wang, P.-F., Ma, J.-Y., Yin, Y.-X., Wu, X.-W., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03319 · Cited by 244
Self-citationJin, Y., Liu, K., Lang, J., Zhuo, D., Huang, Z., Wang, C.-A., Wu, H., & Cui, Y. (2018) · Nature Energy · doi:10.1038/s41560-018-0198-9 · Cited by 239
Zhang, Z., Zhao, Y., Chen, S., Xie, D., Yao, X., Cui, P., & Xu, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04320a · Cited by 194
Duan, H., Zhang, J., Chen, X., Zhang, X.-D., Li, J.-Y., Huang, L.-B., Zhang, X., Shi, J.-L., Yin, Y.-X., Zhang, Q., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10488 · Cited by 158
Self-citation
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Elastomeric electrolytes for high-energy solid-state lithium batteries
Lee, M. J., Han, J., Lee, K., Lee, Y. J., Kim, B. G., Jung, K.-N., Kim, B. J., & Lee, S. W. (2022) · Nature · doi:10.1038/s41586-021-04209-4 · Cited by 777
Ionic Conduction in Polymer‐Based Solid Electrolytes
Li, Z., Fu, J., Zhou, X., Gui, S., Wei, L., Yang, H., Li, H., & Guo, X. (2023) · Advanced Science · doi:10.1002/advs.202201718 · Cited by 678
Metadata
- Authors
- Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-01-31
- Volume
- 31
- Issue
- 12
- Pages
- e1807789-e1807789
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2912162165
- Cited by
- 466
- References
- 42
- FWCI
- 22.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.