The DOI matches its Crossref record; 157 of the 157 references it cites were found in a registry or an index.
Defect and Contact Passivation for Perovskite Solar Cells
Abstract
Metal‐halide perovskites are rapidly emerging as an important class of photovoltaic absorbers that may enable high‐performance solar cells at affordable cost. Thanks to the appealing optoelectronic properties of these materials, tremendous progress has been reported in the last few years in terms of power conversion efficiencies (PCE) of perovskite solar cells (PSCs), now with record values in excess of 24%. Nevertheless, the crystalline lattice of perovskites often includes defects, such as interstitials, vacancies, and impurities; at the grain boundaries and surfaces, dangling bonds can also be present, which all contribute to nonradiative recombination of photo‐carriers. On device level, such recombination undesirably inflates the open‐circuit voltage deficit, acting thus as a significant roadblock toward the theoretical efficiency limit of 30%. Herein, the focus is on the origin of the various voltage‐limiting mechanisms in PSCs, and possible mitigation strategies are discussed. Contact passivation schemes and the effect of such methods on the reduction of hysteresis are described. Furthermore, several strategies that demonstrate how passivating contacts can increase the stability of PSCs are elucidated. Finally, the remaining key challenges in contact design are prioritized and an outlook on how passivating contacts will contribute to further the progress toward market readiness of high‐efficiency PSCs is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Ionic transport in hybrid lead iodide perovskite solar cells
Eames, C., Frost, J. M., Barnes, P. R. F., O’Regan, B. C., Walsh, A., & Islam, M. S. (2015) · Nature Communications · doi:10.1038/ncomms8497 · Cited by 2,889
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Self-citationUnusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Yoshikawa, K., Kawasaki, H., Yoshida, W., Irie, T., Konishi, K., Nakano, K., Uto, T., Adachi, D., Kanematsu, M., Uzu, H., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.32 · Cited by 2,692
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications
Pan, X., Yang, M.-Q., Fu, X., Zhang, N., & Xu, Y.-J. (2013) · Nanoscale · doi:10.1039/c3nr00476g · Cited by 2,151
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Tabulated values of the Shockley–Queisser limit for single junction solar cells
Rühle, S. (2016) · Solar Energy · doi:10.1016/j.solener.2016.02.015 · Cited by 2,047
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Sherkar, T. S., Momblona, C., Gil-Escrig, L., Ávila, J., Sessolo, M., Bolink, H. J., & Koster, L. J. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00236 · Cited by 1,280
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
High-efficiency crystalline silicon solar cells: status and perspectives
Battaglia, C., Cuevas, A., & De Wolf, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03380b · Cited by 1,178
Self-citationPerovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
24.7% Record Efficiency HIT Solar Cell on Thin Silicon Wafer
Taguchi, M., Yano, A., Tohoda, S., Matsuyama, K., Nakamura, Y., Nishiwaki, T., Fujita, K., & Maruyama, E. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2013.2282737 · Cited by 1,111
Johnston, M. B., & Herz, L. M. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00411 · Cited by 1,109
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Solar cell efficiency tables (version 50)
Green, M. A., Hishikawa, Y., Warta, W., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. H. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2909 · Cited by 910
The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite
Kim, J., Lee, S.-H., Lee, J. H., & Hong, K.-H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500370k · Cited by 906
Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells
Jacobsson, T. J., Correa-Baena, J.-P., Halvani Anaraki, E., Philippe, B., Stranks, S. D., Bouduban, M. E. F., Tress, W., Schenk, K., Teuscher, J., Moser, J.-E., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06320 · Cited by 901
Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering
Son, D.-Y., Kim, S.-G., Seo, J.-Y., Lee, S.-H., Shin, H., Lee, D., & Park, N.-G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10430 · Cited by 891
Giordano, F., Abate, A., Correa Baena, J. P., Saliba, M., Matsui, T., Im, S. H., Zakeeruddin, S. M., Nazeeruddin, M. K., Hagfeldt, A., & Graetzel, M. (2016) · Nature Communications · doi:10.1038/ncomms10379 · Cited by 869
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Light-induced lattice expansion leads to high-efficiency perovskite solar cells
Tsai, H., Asadpour, R., Blancon, J.-C., Stoumpos, C. C., Durand, O., Strzalka, J. W., Chen, B., Verduzco, R., Ajayan, P. M., Tretiak, S., et al. (2018) · Science · doi:10.1126/science.aap8671 · Cited by 770
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
Saidaminov, M. I., Kim, J., Jain, A., Quintero-Bermudez, R., Tan, H., Long, G., Tan, F., Johnston, A., Zhao, Y., Voznyy, O., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0192-2 · Cited by 751
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Abrusci, A., Stranks, S. D., Docampo, P., Yip, H.-L., Jen, A. K.-Y., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl401044q · Cited by 640
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells
Wang, Q., Dong, Q., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201600969 · Cited by 633
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Preparation and characterization of layered lead halide compounds
Calabrese, J., Jones, N. L., Harlow, R. L., Herron, N., Thorn, D. L., & Wang, Y. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00006a076 · Cited by 596
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Wang, L., McCleese, C., Kovalsky, A., Zhao, Y., & Burda, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504632z · Cited by 571
Strong Covalency-Induced Recombination Centers in Perovskite Solar Cell Material CH3NH3PbI3
Agiorgousis, M. L., Sun, Y.-Y., Zeng, H., & Zhang, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5079305 · Cited by 564
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Richter, J. M., Abdi-Jalebi, M., Sadhanala, A., Tabachnyk, M., Rivett, J. P. H., Pazos-Outón, L. M., Gödel, K. C., Price, M., Deschler, F., & Friend, R. H. (2016) · Nature Communications · doi:10.1038/ncomms13941 · Cited by 554
Charge-Carrier Dynamics in 2D Hybrid Metal–Halide Perovskites
Milot, R. L., Sutton, R. J., Eperon, G. E., Haghighirad, A. A., Martinez Hardigree, J., Miranda, L., Snaith, H. J., Johnston, M. B., & Herz, L. M. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03114 · Cited by 536
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Low surface recombination velocity in solution-grown CH3NH3PbBr3 perovskite single crystal
Yang, Y., Yan, Y., Yang, M., Choi, S., Zhu, K., Luther, J. M., & Beard, M. C. (2015) · Nature Communications · doi:10.1038/ncomms8961 · Cited by 519
Peng, J., Khan, J. I., Liu, W., Ugur, E., Duong, T., Wu, Y., Shen, H., Wang, K., Dang, H., Aydin, E., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801208 · Cited by 518
Self-citationBu, T., Liu, X., Zhou, Y., Yi, J., Huang, X., Luo, L., Xiao, J., Ku, Z., Peng, Y., Huang, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02634j · Cited by 516
Benefit of Grain Boundaries in Organic–Inorganic Halide Planar Perovskite Solar Cells
Yun, J. S., Ho-Baillie, A., Huang, S., Woo, S. H., Heo, Y., Seidel, J., Huang, F., Cheng, Y.-B., & Green, M. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00182 · Cited by 502
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201503298 · Cited by 458
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700722 · Cited by 457
High-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells
Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451
Efficient perovskite solar cells by metal ion doping
Wang, J. T.-W., Wang, Z., Pathak, S., Zhang, W., deQuilettes, D. W., Wisnivesky-Rocca-Rivarola, F., Huang, J., Nayak, P. K., Patel, J. B., Mohd Yusof, H. A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01969b · Cited by 450
Cao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N. (2018) · Advanced Materials · doi:10.1002/adma.201705596 · Cited by 447
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703519 · Cited by 435
Long, R., Liu, J., & Prezhdo, O. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00645 · Cited by 395
Understanding how excess lead iodide precursor improves halide perovskite solar cell performance
Park, B.-W., Kedem, N., Kulbak, M., Lee, D. Y., Yang, W. S., Jeon, N. J., Seo, J., Kim, G., Kim, K. J., Shin, T. J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05583-w · Cited by 391
Zheng, X., Deng, Y., Chen, B., Wei, H., Xiao, X., Fang, Y., Lin, Y., Yu, Z., Liu, Y., Wang, Q., et al. (2018) · Advanced Materials · doi:10.1002/adma.201803428 · Cited by 386
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Jošt, M., Köhnen, E., Morales-Vilches, A. B., Lipovšek, B., Jäger, K., Macco, B., Al-Ashouri, A., Krč, J., Korte, L., Rech, B., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02469c · Cited by 379
Pathak, S. K., Abate, A., Ruckdeschel, P., Roose, B., Gödel, K. C., Vaynzof, Y., Santhala, A., Watanabe, S., Hollman, D. J., Noel, N., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401658 · Cited by 376
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Light-induced annihilation of Frenkel defects in organo-lead halide perovskites
Mosconi, E., Meggiolaro, D., Snaith, H. J., Stranks, S. D., & De Angelis, F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01504b · Cited by 372
Li, T., Pan, Y., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01798g · Cited by 370
Bai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
Wang, K.-C., Shen, P.-S., Li, M.-H., Chen, S., Lin, M.-W., Chen, P., & Guo, T.-F. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503610u · Cited by 358
Photovoltaic Performance of Perovskite Solar Cells with Different Grain Sizes
Kim, H. D., Ohkita, H., Benten, H., & Ito, S. (2016) · Advanced Materials · doi:10.1002/adma.201504144 · Cited by 355
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Kim, M., Motti, S. G., Sorrentino, R., & Petrozza, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01101j · Cited by 344
Dong, X., Fang, X., Lv, M., Lin, B., Zhang, S., Ding, J., & Yuan, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06128d · Cited by 341
Energetic and Electronic Structure Analysis of Intrinsic Defects in SnO2
Godinho, K. G., Walsh, A., & Watson, G. W. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp807753t · Cited by 339
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
Nonradiative Losses in Metal Halide Perovskites
Stranks, S. D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00239 · Cited by 336
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Sun, C., Wu, Z., Yip, H., Zhang, H., Jiang, X., Xue, Q., Hu, Z., Hu, Z., Shen, Y., Wang, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501534 · Cited by 331
Davies, C. L., Filip, M. R., Patel, J. B., Crothers, T. W., Verdi, C., Wright, A. D., Milot, R. L., Giustino, F., Johnston, M. B., & Herz, L. M. (2018) · Nature Communications · doi:10.1038/s41467-017-02670-2 · Cited by 329
Liu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703432 · Cited by 324
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites
Tan, H., Che, F., Wei, M., Zhao, Y., Saidaminov, M. I., Todorović, P., Broberg, D., Walters, G., Tan, F., Zhuang, T., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05531-8 · Cited by 315
Turren-Cruz, S.-H., Saliba, M., Mayer, M. T., Juárez-Santiesteban, H., Mathew, X., Nienhaus, L., Tress, W., Erodici, M. P., Sher, M.-J., Bawendi, M. G., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02901b · Cited by 311
Band gap‐voltage offset and energy production in next‐generation multijunction solar cells
King, R. R., Bhusari, D., Boca, A., Larrabee, D., Liu, X. ‐., Hong, W., Fetzer, C. M., Law, D. C., & Karam, N. H. (2011) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.1044 · Cited by 308
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Temperature Dependence of the Urbach Energy in Lead Iodide Perovskites
Ledinsky, M., Schönfeldová, T., Holovský, J., Aydin, E., Hájková, Z., Landová, L., Neyková, N., Fejfar, A., & De Wolf, S. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b00138 · Cited by 296
Self-citationHigh-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Staub, F., Hempel, H., Hebig, J.-C., Mock, J., Paetzold, U. W., Rau, U., Unold, T., & Kirchartz, T. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.6.044017 · Cited by 278
Huang, J., Shao, Y., & Dong, Q. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01419 · Cited by 245
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Xue, Q., Bai, Y., Liu, M., Xia, R., Hu, Z., Chen, Z., Jiang, X., Huang, F., Yang, S., Matsuo, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602333 · Cited by 243
Zhou, Y., Wang, F., Cao, Y., Wang, J., Fang, H., Loi, M. A., Zhao, N., & Wong, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701048 · Cited by 234
Navas, J., Sánchez-Coronilla, A., Gallardo, J. J., Cruz Hernández, N., Piñero, J. C., Alcántara, R., Fernández-Lorenzo, C., De los Santos, D. M., Aguilar, T., & Martín-Calleja, J. (2015) · Nanoscale · doi:10.1039/c5nr00041f · Cited by 233
Abdi‐Jalebi, M., Dar, M. I., Sadhanala, A., Senanayak, S. P., Franckevičius, M., Arora, N., Hu, Y., Nazeeruddin, M. K., Zakeeruddin, S. M., Grätzel, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502472 · Cited by 228
Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells
Hou, Y., Chen, W., Baran, D., Stubhan, T., Luechinger, N. A., Hartmeier, B., Richter, M., Min, J., Chen, S., Quiroz, C. O. R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504168 · Cited by 206
Temperature dependence of the Urbach edge in GaAs
Johnson, S. R., & Tiedje, T. (1995) · Journal of Applied Physics · doi:10.1063/1.359683 · Cited by 205
Photovoltaic efficiency limits and material disorder
Nayak, P. K., Garcia-Belmonte, G., Kahn, A., Bisquert, J., & Cahen, D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03178g · Cited by 202
Peng, J., Duong, T., Zhou, X., Shen, H., Wu, Y., Mulmudi, H. K., Wan, Y., Zhong, D., Li, J., Tsuzuki, T., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601768 · Cited by 198
Understanding Detrimental and Beneficial Grain Boundary Effects in Halide Perovskites
Adhyaksa, G. W. P., Brittman, S., Āboliņš, H., Lof, A., Li, X., Keelor, J. D., Luo, Y., Duevski, T., Heeren, R. M. A., Ellis, S. R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804792 · Cited by 197
Jung, M., Shin, T. J., Seo, J., Kim, G., & Seok, S. I. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00995c · Cited by 195
Bastiani, M. D., Dell’Erba, G., Gandini, M., D’Innocenzo, V., Neutzner, S., Kandada, A. R. S., Grancini, G., Binda, M., Prato, M., Ball, J. M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501453 · Cited by 194
Chaudhary, B., Kulkarni, A., Jena, A. K., Ikegami, M., Udagawa, Y., Kunugita, H., Ema, K., & Miyasaka, T. (2017) · ChemSusChem · doi:10.1002/cssc.201700271 · Cited by 193
Wang, F., Shimazaki, A., Yang, F., Kanahashi, K., Matsuki, K., Miyauchi, Y., Takenobu, T., Wakamiya, A., Murata, Y., & Matsuda, K. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12137 · Cited by 192
Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact
Chavhan, S. D., Miguel, O., Grande, H., Pedro, V. G., Sánchez, R. S., Barea, E. M., Mora‐Seró, I., & Tena‐Zaera, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01310g · Cited by 190
Thermal Stability of CuSCN Hole Conductor‐Based Perovskite Solar Cells
Jung, M., Kim, Y. C., Jeon, N. J., Yang, W. S., Seo, J., Noh, J. H., & Il Seok, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600957 · Cited by 188
Han, G. S., Chung, H. S., Kim, B. J., Kim, D. H., Lee, J. W., Swain, B. S., Mahmood, K., Yoo, J. S., Park, N.-G., Lee, J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta03684k · Cited by 185
Lu, J., Lin, X., Jiao, X., Gengenbach, T., Scully, A. D., Jiang, L., Tan, B., Sun, J., Li, B., Pai, N., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00754c · Cited by 182
Visoly‐Fisher, I., Cohen, S. R., Gartsman, K., Ruzin, A., & Cahen, D. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500396 · Cited by 176
Shen, H., Omelchenko, S. T., Jacobs, D. A., Yalamanchili, S., Wan, Y. Y., Yan, D., Phang, P., Duong, T., Wu, Y., Yin, Y., et al. (2018) · Science Advances · doi:10.1126/sciadv.aau9711 · Cited by 175
Gu, Z., Zuo, L., Larsen-Olsen, T. T., Ye, T., Wu, G., Krebs, F. C., & Chen, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07008b · Cited by 171
Enhanced Charge Collection with Passivation Layers in Perovskite Solar Cells
Lee, Y. H., Luo, J., Son, M., Gao, P., Cho, K. T., Seo, J., Zakeeruddin, S. M., Grätzel, M., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505140 · Cited by 167
On the directionality of halogen bonding
Huber, S. M., Scanlon, J. D., Jimenez‐Izal, E., Ugalde, J. M., & Infante, I. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50892g · Cited by 157
Landi, G., Neitzert, H. C., Barone, C., Mauro, C., Lang, F., Albrecht, S., Rech, B., & Pagano, S. (2017) · Advanced Science · doi:10.1002/advs.201700183 · Cited by 157
Radiative Efficiency Limit with Band Tailing Exceeds 30% for Quantum Dot Solar Cells
Jean, J., Mahony, T., Bozyigit, D., Sponseller, M., Holovský, J., Bawendi, M. G., & Bulović, V. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00923 · Cited by 146
Shirley, R. A., Kraft, M., & Inderwildi, O. R. (2010) · Physical Review B · doi:10.1103/physrevb.81.075111 · Cited by 138
Hawash, Z. M., Raga, S. R., Son, D., Ono, L. K., Park, N., & Qi, Y. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01508 · Cited by 132
Electronic properties of oxygen-deficient and aluminum-doped rutile TiO2 from first principles
Islam, M. M., Bredow, T., & Gerson, A. R. (2007) · Physical Review B · doi:10.1103/physrevb.76.045217 · Cited by 127
Highly Efficient Perovskite Solar Cells via Nickel Passivation
Gong, X., Guan, L., Pan, H., Sun, Q., Zhao, X., Li, H., Pan, H., Shen, Y. F., Shao, Y., Sun, L., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804286 · Cited by 119
Practical Efficiency Limit of Methylammonium Lead Iodide Perovskite (CH 3 NH 3 PbI 3 ) Solar Cells
Baloch, A. A. B., Hossain, M. I., Tabet, N., & Alharbi, F. H. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b03343 · Cited by 117
Fang, X., Ding, J., Yuan, N., Sun, P., Lv, M., Ding, G., & Zhu, C. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06953c · Cited by 112
Dual function interfacial layer for highly efficient and stable lead halide perovskite solar cells
Song, D., Wei, D., Cui, P., Li, M., Duan, Z., Wang, T., Ji, J., Li, Y., Mbengue, J. M., Li, Y., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00577b · Cited by 108
Eperon, G. E., Moerman, D., & Ginger, D. S. (2016) · ACS Nano · doi:10.1021/acsnano.6b05825 · Cited by 91
Salomé, P. M. P., Vermang, B., Ribeiro-Andrade, R., Teixeira, J. P., Cunha, J. M. V., Mendes, M. J., Haque, S., Borme, J., Águas, H., Fortunato, E. M. C., et al. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201701101 · Cited by 81
Large Neutral Barrier at Grain Boundaries in Chalcopyrite Thin Films
Hafemeister, M., Siebentritt, S., Albert, J., et al. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.196602 · Cited by 75
Large Planar π-Conjugated Porphyrin for Interfacial Engineering in p-i-n Perovskite Solar Cells
Li, B., Zheng, C., Liu, H., Zhu, J., Zhang, H., Gao, D., & Huang, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10342 · Cited by 74
Impact of Crystal Surface on Photoexcited States in Organic–Inorganic Perovskites
Birkhold, S. T., Zimmermann, E., Kollek, T., Wurmbrand, D., Polarz, S., & Schmidt‐Mende, L. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604995 · Cited by 29
Cited by
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Minimizing non-radiative recombination losses in perovskite solar cells
Luo, D., Su, R., Zhang, W., Gong, Q., & Zhu, R. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0151-y · Cited by 1,273
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Perovskite light-emitting diodes
Fakharuddin, A., Gangishetty, M. K., Abdi-Jalebi, M., Chin, S.-H., bin Mohd Yusoff, A. R., Congreve, D. N., Tress, W., Deschler, F., Vasilopoulou, M., & Bolink, H. J. (2022) · Nature Electronics · doi:10.1038/s41928-022-00745-7 · Cited by 791
Metadata
- Authors
- Aydin, E., De Bastiani, M., & De Wolf, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-07
- Volume
- 31
- Issue
- 25
- Pages
- e1900428-e1900428
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2944370267
- Cited by
- 681
- References
- 157
- FWCI
- 28.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.