The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Sulfur‐Grafted Hollow Carbon Spheres for Potassium‐Ion Battery Anodes
Abstract
Sulfur‐rich carbons are minimally explored for potassium‐ion batteries (KIBs). Here, a large amount of S (38 wt%) is chemically incorporated into a carbon host, creating sulfur‐grafted hollow carbon spheres (SHCS) for KIB anodes. The SHCS architecture provides a combination of nanoscale (≈40 nm) diffusion distances and CS chemical bonding to minimize cycling capacity decay and Coulombic efficiency (CE) loss. The SHCS exhibit a reversible capacity of 581 mAh g−1 (at 0.025 A g−1), which is the highest reversible capacity reported for any carbon‐based KIB anode. Electrochemical analysis of S‐free carbon spheres baseline demonstrates that both the carbon matrix and the sulfur species are highly electrochemically active. SHCS also show excellent rate capability, achieving 202, 160, and 110 mAh g−1 at 1.5, 3, and 5 A g−1, respectively. The electrode maintains 93% of the capacity from the 5th to 1000th cycle at 3 A g−1, with steady‐state CE being near 100%. Raman analysis indicates reversible breakage of CS and SS bonds upon potassiation to 0.01 V versus K/K+. The galvanostatic intermittent titration technique (GITT) analysis provides voltage‐dependent K+ diffusion coefficients that range from 10−10 to 10−12 cm 2 s−1 upon potassiation and depotassiation, with approximately five times higher coefficient for the former.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Liang, J., Jiao, Y., Jaroniec, M., & Qiao, S. Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201206720 · Cited by 2,093
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Olivetti, E. A., Ceder, G., Gaustad, G. G., & Fu, X. (2017) · Joule · doi:10.1016/j.joule.2017.08.019 · Cited by 1,572
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Xu, Y., Zhang, C., Zhou, M., Fu, Q., Zhao, C., Wu, M., & Lei, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04190-z · Cited by 1,149
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Komaba, S., Hasegawa, T., Dahbi, M., & Kubota, K. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.09.002 · Cited by 1,104
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Self-citationReview of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
Self-citationSodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Self-citationPotassium Ion Batteries with Graphitic Materials
Luo, W., Wan, J., Ozdemir, B., Bao, W., Chen, Y., Dai, J., Lin, H., Xu, Y., Gu, F., Barone, V., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03667 · Cited by 929
Eftekhari, A., Jian, Z., & Ji, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07989 · Cited by 860
Yang, J., Ju, Z., Jiang, Y., Xing, Z., Xi, B., Feng, J., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201700104 · Cited by 849
Self-citationA Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Role of Nitrogen-Doped Graphene for Improved High-Capacity Potassium Ion Battery Anodes
Share, K., Cohn, A. P., Carter, R., Rogers, B., & Pint, C. L. (2016) · ACS Nano · doi:10.1021/acsnano.6b05998 · Cited by 725
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Li, W., Zhou, M., Li, H., Wang, K., Cheng, S., & Jiang, K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01985k · Cited by 641
Phase Transformations in Metals and Alloys
Meyrick, G., & Powell, G. W. (1973) · Annual Review of Materials Science · doi:10.1146/annurev.ms.03.080173.001551 · Cited by 621
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Short‐Range Order in Mesoporous Carbon Boosts Potassium‐Ion Battery Performance
Wang, W., Zhou, J., Wang, Z., Zhao, L., Li, P., Yang, Y., Yang, C., Huang, H., & Guo, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701648 · Cited by 575
Graphitic Carbon Nanocage as a Stable and High Power Anode for Potassium‐Ion Batteries
Cao, B., Zhang, Q., Liu, H., Xu, B., Zhang, S., Zhou, T., Mao, J., Pang, W. K., Guo, Z., Li, A., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801149 · Cited by 561
Hard–Soft Composite Carbon as a Long‐Cycling and High‐Rate Anode for Potassium‐Ion Batteries
Jian, Z., Hwang, S., Li, Z., Hernandez, A. S., Wang, X., Xing, Z., Su, D., & Ji, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700324 · Cited by 551
Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries
Chen, C., Wang, Z., Zhang, B., Miao, L., Cai, J., Peng, L., Huang, Y., Jiang, J., Huang, Y., Zhang, L., et al. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.010 · Cited by 468
Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High‐Performance Potassium‐Ion Batteries
Chen, M., Wang, W., Liang, X., Gong, S., Liu, J., Wang, Q., Guo, S., & Yang, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800171 · Cited by 454
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Xie, Y., Chen, Y., Liu, L., Tao, P., Fan, M., Xu, N., Shen, X., & Yan, C. (2017) · Advanced Materials · doi:10.1002/adma.201702268 · Cited by 405
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Wang, Y., Wang, Z., Chen, Y., Zhang, H., Yousaf, M., Wu, H., Zou, M., Cao, A., & Han, R. P. S. (2018) · Advanced Materials · doi:10.1002/adma.201802074 · Cited by 370
Self-citationEngineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode
Bin, D.-S., Lin, X.-J., Sun, Y.-G., Xu, Y.-S., Zhang, K., Cao, A.-M., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02178 · Cited by 284
Lithium storage in conductive sulfur-containing polymers
Yu, X.-G., Xie, J.-Y., Yang, J., Huang, H.-J., Wang, K., & Wen, Z.-S. (2004) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2004.07.004 · Cited by 249
Xiong, P., Zhao, X., & Xu, Y. (2018) · ChemSusChem · doi:10.1002/cssc.201701759 · Cited by 241
Few layer nitrogen-doped graphene with highly reversible potassium storage
Ju, Z., Li, P., Ma, G., Xing, Z., Zhuang, Q., & Qian, Y. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.009 · Cited by 229
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Self-citationXiong, P., Bai, P., Tu, S., Cheng, M., Zhang, J., Sun, J., & Xu, Y. (2018) · Small · doi:10.1002/smll.201802140 · Cited by 226
High rate and long cycle life porous carbon nanofiber paper anodes for potassium-ion batteries
Zhao, X., Xiong, P., Meng, J., Liang, Y., Wang, J., & Xu, Y. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta04264g · Cited by 208
Superior potassium storage in chitin-derived natural nitrogen-doped carbon nanofibers
Hao, R., Lan, H., Kuang, C., Wang, H., & Guo, L. (2018) · Carbon · doi:10.1016/j.carbon.2017.11.064 · Cited by 204
Graphene-like Carbon–Nitride Monolayer: A Potential Anode Material for Na- and K-Ion Batteries
Bhauriyal, P., Mahata, A., & Pathak, B. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b09433 · Cited by 204
Liu, Y., Yang, C., Pan, Q., Li, Y., Wang, G., Ou, X., Zheng, F., Xiong, X., Liu, M., & Zhang, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04694h · Cited by 182
Qi, X., Huang, K., Wu, X., Zhao, W., Wang, H., Zhuang, Q., & Ju, Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.094 · Cited by 159
Internal structure – Na storage mechanisms – Electrochemical performance relations in carbons
Bommier, C., Mitlin, D., & Ji, X. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.006 · Cited by 158
Self-citationSustainable Potassium-Ion Battery Anodes Derived from Waste-Tire Rubber
Li, Y., Adams, R. A., Arora, A., Pol, V. G., Levine, A. M., Lee, R. J., Akato, K. M., Naskar, A. K., & Paranthaman, M. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1391706jes · Cited by 103
Kinetic behavior of LiFeMgPO4 cathode material for Li-ion batteries
Hong, J. H., Wang, C., & Kasavajjula, U. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.08.004 · Cited by 76
Xiong, Q., Jiang, Y., Cai, X., Yang, F., Li, Z., & Han, W. (2019) · ACS Nano · doi:10.1021/acsnano.8b09741 · Cited by 69
Cited by
Potassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Applications of lithium-ion batteries in grid-scale energy storage systems
Chen, T., Jin, Y., Lv, H., Yang, A., Liu, M., Chen, B., Xie, Y., & Chen, Q. (2020) · Transactions of Tianjin University · doi:10.1007/s12209-020-00236-w · Cited by 692
Huang, H., Xu, R., Feng, Y., Zeng, S., Jiang, Y., Wang, H., Luo, W., & Yu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201904320 · Cited by 529
Li, Z., Zhang, Y., Liu, T., Gao, X., Li, S., Ling, M., Liang, C., Zheng, J., & Lin, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903110 · Cited by 404
Challenges and Strategies toward Cathode Materials for Rechargeable Potassium‐Ion Batteries
Liu, S., Kang, L., & Jun, S. C. (2021) · Advanced Materials · doi:10.1002/adma.202004689 · Cited by 345
Metadata
- Authors
- Ding, J., Zhang, H., Zhou, H., Feng, J., Zheng, X., Zhong, C., Paek, E., Hu, W., & Mitlin, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-06-03
- Volume
- 31
- Issue
- 30
- Pages
- e1900429-e1900429
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2948931778
- Cited by
- 342
- References
- 56
- FWCI
- 20.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.