The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency
Open accessAbstract
Passivation of interfacial defects serves as an effective means to realize highly efficient and stable perovskite solar cells (PSCs). However, most molecular modulators currently used to mitigate such defects form poorly conductive aggregates at the perovskite interface with the charge collection layer, impeding the extraction of photogenerated charge carriers. Here, a judiciously engineered passivator, 4‐tert‐butyl‐benzylammonium iodide (tBBAI), is introduced, whose bulky tert‐butyl groups prevent the unwanted aggregation by steric repulsion. It is found that simple surface treatment with tBBAI significantly accelerates the charge extraction from the perovskite into the spiro‐OMeTAD hole‐transporter, while retarding the nonradiative charge carrier recombination. This boosts the power conversion efficiency (PCE) of the PSC from ≈20% to 23.5% reducing the hysteresis to barely detectable levels. Importantly, the tBBAI treatment raises the fill factor from 0.75 to the very high value of 0.82, which concurs with a decrease in the ideality factor from 1.72 to 1.34, confirming the suppression of radiation‐less carrier recombination. The tert‐butyl group also provides a hydrophobic umbrella protecting the perovskite film from attack by ambient moisture. As a result, the PSCs show excellent operational stability retaining over 95% of their initial PCE after 500 h full‐sun illumination under maximum‐power‐point tracking under continuous simulated solar irradiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Self-citationIncorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationHigh-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
An improved experimental determination of external photoluminescence quantum efficiency
de Mello, J. C., Wittmann, H. F., & Friend, R. H. (1997) · Advanced Materials · doi:10.1002/adma.19970090308 · Cited by 2,056
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Self-citationKim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Self-citationSherkar, T. S., Momblona, C., Gil-Escrig, L., Ávila, J., Sessolo, M., Bolink, H. J., & Koster, L. J. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00236 · Cited by 1,280
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Tress, W., Yavari, M., Domanski, K., Yadav, P., Niesen, B., Correa Baena, J. P., Hagfeldt, A., & Graetzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02415k · Cited by 843
Self-citationLiu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Self-citationAn interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Caprioglio, P., Stolterfoht, M., Wolff, C. M., Unold, T., Rech, B., Albrecht, S., & Neher, D. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901631 · Cited by 557
Controlling competing photochemical reactions stabilizes perovskite solar cells
Motti, S. G., Meggiolaro, D., Barker, A. J., Mosconi, E., Perini, C. A. R., Ball, J. M., Gandini, M., Kim, M., De Angelis, F., & Petrozza, A. (2019) · Nature Photonics · doi:10.1038/s41566-019-0435-1 · Cited by 425
Zhang, F., Shi, W., Luo, J., Pellet, N., Yi, C., Li, X., Zhao, X., Dennis, T. J. S., Li, X., Wang, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606806 · Cited by 390
Self-citationConsolidation of the optoelectronic properties of CH3NH3PbBr3 perovskite single crystals
Wenger, B., Nayak, P. K., Wen, X., Kesava, S. V., Noel, N. K., & Snaith, H. J. (2017) · Nature Communications · doi:10.1038/s41467-017-00567-8 · Cited by 259
Dye-sensitized TiO2 thin-film solar cell research at the National Renewable Energy Laboratory (NREL)
Deb, S. K. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.09.007 · Cited by 184
Control of Charge Recombination in Perovskites by Oxidation State of Halide Vacancy
Li, W., Sun, Y.-Y., Li, L., Zhou, Z., Tang, J., & Prezhdo, O. V. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08448 · Cited by 179
Baloch, A. A. B., Alharbi, F. H., Grancini, G., Hossain, M. I., Nazeeruddin, M. K., & Tabet, N. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b07069 · Cited by 174
Self-Seeding Growth for Perovskite Solar Cells with Enhanced Stability
Zhang, F., Xiao, C., Chen, X., Larson, B. W., Harvey, S. P., Berry, J. J., & Zhu, K. (2019) · Joule · doi:10.1016/j.joule.2019.03.023 · Cited by 146
Tavakoli, M. M., Bi, D., Pan, L., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800275 · Cited by 132
Self-citationZhang, Y., Li, S., Yang, W. C., Joshi, M. K., & Fang, X. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b00960 · Cited by 123
Ji, F., Pang, S., Zhang, L., Zong, Y., Cui, G., Padture, N. P., & Zhou, Y. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00980 · Cited by 89
Ye, F., Tang, W., Xie, F., Yin, M., He, J., Wang, Y., Chen, H., Qiang, Y., Yang, X., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701440 · Cited by 88
Perovskite Methylammonium Lead Trihalide Heterostructures: Progress and Challenges
Al-Amri, A. M., Cheng, B., & He, J. (2018) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2018.2872887 · Cited by 79
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Self-citationLong-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Self-citationTowards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
Chen, H., Teale, S., Chen, B., Hou, Y., Grater, L., Zhu, T., Bertens, K., Park, S. M., Atapattu, H. R., Gao, Y., et al. (2022) · Nature Photonics · doi:10.1038/s41566-022-00985-1 · Cited by 588
Rethinking the A cation in halide perovskites
Lee, J.-W., Tan, S., Seok, S. I., Yang, Y., & Park, N.-G. (2022) · Science · doi:10.1126/science.abj1186 · Cited by 557
Metadata
- Authors
- Zhu, H., Liu, Y., Eickemeyer, F. T., Pan, L., Ren, D., Ruiz‐Preciado, M. A., Carlsen, B., Yang, B., Dong, X., Wang, Z., Liu, H., Wang, S., Zakeeruddin, S. M., Hagfeldt, A., Dar, M. I., Li, X., & Grätzel, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-18
- Volume
- 32
- Issue
- 12
- Pages
- e1907757-e1907757
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3008736366
- Cited by
- 412
- References
- 33
- FWCI
- 25.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.