The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Engineering Fe–N Coordination Structures for Fast Redox Conversion in Lithium–Sulfur Batteries
Abstract
Critical drawbacks, including sluggish redox kinetics and undesirable shuttling of polysulfides (Li 2 Sn, n = 4–8), seriously deteriorate the electrochemical performance of high‐energy‐density lithium–sulfur (Li–S) batteries. Herein, these challenges are addressed by constructing an integrated catalyst with dual active sites, where single‐atom (SA)‐Fe and polar Fe 2 N are co‐embedded in nitrogen‐doped graphene (SA‐Fe/Fe 2 N@NG). The SA‐Fe, with plane‐symmetric Fe‐4N coordination, and Fe 2 N, with triangular pyramidal Fe‐3N coordination, in this well‐designed configuration exhibit synergistic adsorption of polysulfides and catalytic selectivity for Li 2 Sn lithiation and Li 2 S delithiation, respectively. These characteristics endow the SA‐Fe/Fe 2 N@NG‐modified separator with an optimal polysulfides confinement–catalysis ability, thus accelerating the bidirectional liquid–solid conversion (Li 2 Sn↔Li 2 S) and suppressing the shuttle effect. Consequently, a Li–S battery based on the SA‐Fe/Fe 2 N@NG separator achieves a high capacity retention of 84.1% over 500 cycles at 1 C (pure S cathode, S content: 70 wt%) and a high areal capacity of 5.02 mAh cm−2 at 0.1 C (SA‐Fe/Fe 2 N@NG‐supported S cathode, S loading = 5 mg cm−2). It is expected that the outcomes of the present study will facilitate the design of high‐efficiency catalysts for long‐lasting Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ATHENA,ARTEMIS,HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT
Ravel, B., & Newville, M. (2005) · Journal of Synchrotron Radiation · doi:10.1107/s0909049505012719 · Cited by 16,965
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Jiang, W.-J., Gu, L., Li, L., Zhang, Y., Zhang, X., Zhang, L.-J., Wang, J.-Q., Hu, J.-S., Wei, Z., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00757 · Cited by 1,765
Self-citationDu, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Ramaswamy, N., Tylus, U., Jia, Q., & Mukerjee, S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405149m · Cited by 882
Jiao, L., Wan, G., Zhang, R., Zhou, H., Yu, S., & Jiang, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201803262 · Cited by 860
Yu, H., Shang, L., Bian, T., Shi, R., Waterhouse, G. I. N., Zhao, Y., Zhou, C., Wu, L., Tung, C., & Zhang, T. (2016) · Advanced Materials · doi:10.1002/adma.201600398 · Cited by 842
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Zhao, C., Xu, G.-L., Yu, Z., Zhang, L., Hwang, I., Mo, Y.-X., Ren, Y., Cheng, L., Sun, C.-J., Ren, Y., et al. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00797-w · Cited by 650
Ao, X., Zhang, W., Li, Z., Li, J.-G., Soule, L., Huang, X., Chiang, W.-H., Chen, H. M., Wang, C., Liu, M., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b05913 · Cited by 509
Regulating the coordination structure of single-atom Fe-NxCy catalytic sites for benzene oxidation
Pan, Y., Chen, Y., Wu, K., Chen, Z., Liu, S., Cao, X., Cheong, W.-C., Meng, T., Luo, J., Zheng, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12362-8 · Cited by 506
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
Bidirectional Catalysts for Liquid–Solid Redox Conversion in Lithium–Sulfur Batteries
Wang, R., Luo, C., Wang, T., Zhou, G., Deng, Y., He, Y., Zhang, Q., Kang, F., Lv, W., & Yang, Q. (2020) · Advanced Materials · doi:10.1002/adma.202000315 · Cited by 423
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Self-citationImplanting Atomic Cobalt within Mesoporous Carbon toward Highly Stable Lithium–Sulfur Batteries
Xie, J., Li, B., Peng, H., Song, Y., Zhao, M., Chen, X., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201903813 · Cited by 377
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Single-atom catalysis enables long-life, high-energy lithium-sulfur batteries
Zhuang, Z., Kang, Q., Wang, D., & Li, Y. (2020) · Nano Research · doi:10.1007/s12274-020-2827-4 · Cited by 322
Li, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density
Kang, N., Lin, Y., Yang, L., Lu, D., Xiao, J., Qi, Y., & Cai, M. (2019) · Nature Communications · doi:10.1038/s41467-019-12542-6 · Cited by 236
Rana, M., Li, M., Huang, X., Luo, B., Gentle, I., & Knibbe, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12066h · Cited by 208
Shi, H., Ren, X., Lu, J., Dong, C., Liu, J., Yang, Q., Chen, J., & Wu, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002271 · Cited by 205
Single-Atom Coated Separator for Robust Lithium–Sulfur Batteries
Zhang, K., Chen, Z., Ning, R., Xi, S., Tang, W., Du, Y., Liu, C., Ren, Z., Chi, X., Bai, M., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05628 · Cited by 192
Shen, Z., Cao, M., Zhang, Z., Pu, J., Zhong, C., Li, J., Ma, H., Li, F., Zhu, J., Pan, F., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906661 · Cited by 188
Zhou, G., Liu, K., Fan, Y., Yuan, M., Liu, B., Liu, W., Shi, F., Liu, Y., Chen, W., Lopez, J., et al. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00569 · Cited by 187
Dual redox mediators accelerate the electrochemical kinetics of lithium-sulfur batteries
Liu, F., Sun, G., Wu, H. B., Chen, G., Xu, D., Mo, R., Shen, L., Li, X., Ma, S., Tao, R., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-19070-8 · Cited by 179
In-Situ Assembled VS4 as a Polysulfide Mediator for High-Loading Lithium–Sulfur Batteries
Luo, L., Li, J., Yaghoobnejad Asl, H., & Manthiram, A. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00292 · Cited by 176
Li, Y., Zhou, P., Li, H., Gao, T., Zhou, L., Zhang, Y., Xiao, N., Xia, Z., Wang, L., Zhang, Q., et al. (2020) · Small Methods · doi:10.1002/smtd.201900701 · Cited by 164
Self-citationOsmieri, L., Videla, A. H. M., Ocón, P., & Specchia, S. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b02455 · Cited by 159
Zhou, G., Yang, A., Gao, G., Yu, X., Xu, J., Liu, C., Ye, Y., Pei, A., Wu, Y., Peng, Y., et al. (2020) · Science Advances · doi:10.1126/sciadv.aay5098 · Cited by 138
Du, L., Wu, Q., Yang, L., Wang, X., Che, R., Lyu, Z., Chen, W., Wang, X., & Hu, Z. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.12.019 · Cited by 130
Wang, L., Yin, J., Zhao, L., Tian, C., Yu, P., Wang, J., & Fu, H. (2013) · Chemical Communications · doi:10.1039/c3cc40971f · Cited by 123
Lou, Y., Liu, J., Liu, M., & Wang, F. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b03716 · Cited by 115
Design Principles of Single Atoms on Carbons for Lithium–Sulfur Batteries
Fang, L., Feng, Z., Cheng, L., Winans, R. E., & Li, T. (2020) · Small Methods · doi:10.1002/smtd.202000315 · Cited by 102
Zhu, A., Qiao, L., Tan, P., Ma, Y., Zeng, W., Dong, R., Ma, C., & Pan, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.05.037 · Cited by 86
Self-citationDual-engineered separator for highly robust, all-climate lithium-sulfur batteries
Ma, C., Feng, Y., Liu, X., Yang, Y., Zhou, L., Chen, L., Yan, C., & Wei, W. F. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.07.034 · Cited by 74
Self-citationLiu, S., Wu, J.-R., Pan, C., & Hwang, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.011 · Cited by 49
Cited by
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Self-citationYao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Metadata
- Authors
- Ma, C., Zhang, Y., Feng, Y., Wang, N., Zhou, L., Liang, C., Chen, L., Lai, Y., Ji, X., Yan, C., & Wei, W.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-06-19
- Volume
- 33
- Issue
- 30
- Pages
- e2100171-e2100171
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3168645508
- Cited by
- 268
- References
- 41
- FWCI
- 15.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.