The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Perspectives of 2D MXene Tribology
Open accessAbstract
The large and rapidly growing family of 2D early transition metal carbides, nitrides, and carbonitrides (MXenes) raises significant interest in the materials science and chemistry of materials communities. Discovered a little more than a decade ago, MXenes have already demonstrated outstanding potential in various applications ranging from energy storage to biology and medicine. The past two years have witnessed increased experimental and theoretical efforts toward studying MXenes’ mechanical and tribological properties when used as lubricant additives, reinforcement phases in composites, or solid lubricant coatings. Although research on the understanding of the friction and wear performance of MXenes under dry and lubricated conditions is still in its early stages, it has experienced rapid growth due to the excellent mechanical properties and chemical reactivities offered by MXenes that make them adaptable to being combined with other materials, thus boosting their tribological performance. In this perspective, the most promising results in the area of MXene tribology are summarized, future important problems to be pursued further are outlined, and methodological recommendations that could be useful for experts as well as newcomers to MXenes research, in particular, to the emerging area of MXene tribology, are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The electronic properties of graphene
Castro Neto, A. H., Guinea, F., Peres, N. M. R., Novoselov, K. S., & Geim, A. K. (2009) · Reviews of Modern Physics · doi:10.1103/revmodphys.81.109 · Cited by 24,803
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationCation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Self-citationThe high-throughput highway to computational materials design
Curtarolo, S., Hart, G. L. W., Nardelli, M. B., Mingo, N., Sanvito, S., & Levy, O. (2013) · Nature Materials · doi:10.1038/nmat3568 · Cited by 2,053
Frictional Characteristics of Atomically Thin Sheets
Lee, C., Li, Q., Kalb, W., Liu, X.-Z., Berger, H., Carpick, R. W., & Hone, J. (2010) · Science · doi:10.1126/science.1184167 · Cited by 1,811
Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes
Kamysbayev, V., Filatov, A. S., Hu, H., Rui, X., Lagunas, F., Wang, D., Klie, R. F., & Talapin, D. V. (2020) · Science · doi:10.1126/science.aba8311 · Cited by 1,703
Li, Y., Shao, H., Lin, Z., Lu, J., Liu, L., Duployer, B., Persson, P. O. Å., Eklund, P., Hultman, L., Li, M., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0657-0 · Cited by 1,657
Li, M., Lu, J., Luo, K., Li, Y., Chang, K., Chen, K., Zhou, J., Rosen, J., Hultman, L., Eklund, P., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00574 · Cited by 1,530
Fluorine‐Free Synthesis of High‐Purity Ti3C2Tx (T=OH, O) via Alkali Treatment
Li, T., Yao, L., Liu, Q., Gu, J., Luo, R., Li, J., Yan, X., Wang, W., Liu, P., Chen, B., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800887 · Cited by 1,457
Elastic properties of 2D Ti 3 C 2 T x MXene monolayers and bilayers
Lipatov, A., Lu, H., Alhabeb, M., Anasori, B., Gruverman, A., Gogotsi, Y., & Sinitskii, A. (2018) · Science Advances · doi:10.1126/sciadv.aat0491 · Cited by 1,064
Self-citationDispersions of Two-Dimensional Titanium Carbide MXene in Organic Solvents
Maleski, K., Mochalin, V. N., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04830 · Cited by 1,033
Self-citationModified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c08357 · Cited by 1,001
NMR reveals the surface functionalisation of Ti3C2MXene
Hope, M. A., Forse, A. C., Griffith, K. J., Lukatskaya, M. R., Ghidiu, M., Gogotsi, Y., & Grey, C. P. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00330c · Cited by 974
Large-scale delamination of multi-layers transition metal carbides and carbonitrides “MXenes”
Naguib, M., Unocic, R. R., Armstrong, B. L., & Nanda, J. (2015) · Dalton Transactions · doi:10.1039/c5dt01247c · Cited by 964
Scharf, T. W., & Prasad, S. V. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-7038-2 · Cited by 840
Pang, S.-Y., Wong, Y.-T., Yuan, S., Liu, Y., Tsang, M.-K., Yang, Z., Huang, H., Wong, W.-T., & Hao, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b02578 · Cited by 835
Few layer graphene to reduce wear and friction on sliding steel surfaces
Berman, D., Erdemir, A., & Sumant, A. V. (2013) · Carbon · doi:10.1016/j.carbon.2012.11.061 · Cited by 721
Self-citationHolmberg, K., & Erdemir, A. (2019) · Tribology International · doi:10.1016/j.triboint.2019.03.024 · Cited by 677
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Self-citationAnasori, B., Shi, C., Moon, E. J., Xie, Y., Voigt, C. A., Kent, P. R. C., May, S. J., Billinge, S. J. L., Barsoum, M. W., & Gogotsi, Y. (2016) · Nanoscale Horizons · doi:10.1039/c5nh00125k · Cited by 637
Self-citationApproaches for Achieving Superlubricity in Two-Dimensional Materials
Berman, D., Erdemir, A., & Sumant, A. V. (2018) · ACS Nano · doi:10.1021/acsnano.7b09046 · Cited by 541
Self-citationHigh-Temperature Behavior and Surface Chemistry of Carbide MXenes Studied by Thermal Analysis
Seredych, M., Shuck, C. E., Pinto, D., Alhabeb, M., Precetti, E., Deysher, G., Anasori, B., Kurra, N., & Gogotsi, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00397 · Cited by 519
Self-citationSynergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review
Rosenkranz, A., Costa, H. L., Baykara, M. Z., & Martini, A. (2021) · Tribology International · doi:10.1016/j.triboint.2020.106792 · Cited by 505
Self-citationCarbon nanomaterials in tribology
Zhai, W., Srikanth, N., Kong, L. B., & Zhou, K. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.027 · Cited by 470
Hydrolysis of 2D Transition-Metal Carbides (MXenes) in Colloidal Solutions
Huang, S., & Mochalin, V. N. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02890 · Cited by 465
Self-citationSavage, R. H. (1948) · Journal of Applied Physics · doi:10.1063/1.1697867 · Cited by 447
Derler, S., & Gerhardt, L.-C. (2012) · Tribology Letters · doi:10.1007/s11249-011-9854-y · Cited by 425
Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions
Han, M., Maleski, K., Shuck, C. E., Yang, Y., Glazar, J. T., Foucher, A. C., Hantanasirisakul, K., Sarycheva, A., Frey, N. C., May, S. J., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07395 · Cited by 419
Preparation, mechanical and anti-friction performance of MXene/polymer composites
Zhang, H., Wang, L., Chen, Q., Li, P., Zhou, A., Cao, X., & Hu, Q. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.084 · Cited by 410
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Zhang, S., Ma, T., Erdemir, A., & Li, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.002 · Cited by 407
Metallic MXenes: A new family of materials for flexible triboelectric nanogenerators
Dong, Y., Mallineni, S. S. K., Maleski, K., Behlow, H., Mochalin, V. N., Rao, A. M., Gogotsi, Y., & Podila, R. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.11.044 · Cited by 395
Self-citationHalogen Etch of Ti3AlC2 MAX Phase for MXene Fabrication
Jawaid, A., Hassan, A., Neher, G., Nepal, D., Pachter, R., Kennedy, W. J., Ramakrishnan, S., & Vaia, R. A. (2021) · ACS Nano · doi:10.1021/acsnano.0c08630 · Cited by 369
2D nanomaterials as lubricant additive: A review
Xiao, H., & Liu, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.029 · Cited by 368
Liu, L., Zhou, M. J., Jin, L., Li, L., Mo, Y., Su, G., Li, X., Zhu, H., & Tian, Y. (2019) · Friction · doi:10.1007/s40544-019-0268-4 · Cited by 365
2D-nanomaterials for controlling friction and wear at interfaces
Spear, J. C., Ewers, B. W., & Batteas, J. D. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.003 · Cited by 346
Double transition-metal MXenes: Atomistic design of two-dimensional carbides and nitrides
Hong, W., Wyatt, B. C., Nemani, S. K., & Anasori, B. (2020) · MRS Bulletin · doi:10.1557/mrs.2020.251 · Cited by 327
Self-citationMechanotribological Aspects of MXene‐Reinforced Nanocomposites
Malaki, M., & Varma, R. S. (2020) · Advanced Materials · doi:10.1002/adma.202003154 · Cited by 292
Electrical and Elastic Properties of Individual Single‐Layer Nb4C3Tx MXene Flakes
Lipatov, A., Alhabeb, M., Lu, H., Zhao, S., Loes, M. J., Vorobeva, N. S., Dall'Agnese, Y., Gao, Y., Gruverman, A., Gogotsi, Y., et al. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.201901382 · Cited by 283
Superior Wear-Resistance of Ti3C2Tx Multilayer Coatings
Grützmacher, P. G., Suarez, S., Tolosa, A., Gachot, C., Song, G., Wang, B., Presser, V., Mücklich, F., Anasori, B., & Rosenkranz, A. (2021) · ACS Nano · doi:10.1021/acsnano.1c01555 · Cited by 263
Self-citationGhidiu, M., Kota, S., Halim, J., Sherwood, A. W., Nedfors, N., Rosen, J., Mochalin, V. N., & Barsoum, M. W. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04234 · Cited by 257
Self-citationMultifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review
Dong, M., Zhang, H., Tzounis, L., Santagiuliana, G., Bilotti, E., & Papageorgiou, D. G. (2021) · Carbon · doi:10.1016/j.carbon.2021.09.009 · Cited by 245
Current Trends and Applications of Machine Learning in Tribology—A Review
Marian, M., & Tremmel, S. (2021) · Lubricants · doi:10.3390/lubricants9090086 · Cited by 238
Yan, H., Zhang, L., Li, H., Fan, X., & Zhu, M. (2020) · Carbon · doi:10.1016/j.carbon.2019.10.034 · Cited by 237
Nanodiamond–polymer composites
Mochalin, V. N., & Gogotsi, Y. (2015) · Diamond and Related Materials · doi:10.1016/j.diamond.2015.07.003 · Cited by 230
Self-citationLiu, Y., Ge, X., & Li, J. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100662 · Cited by 228
Layered 2D Nanomaterials to Tailor Friction and Wear in Machine Elements—A Review
Marian, M., Berman, D., Rota, A., Jackson, R. L., & Rosenkranz, A. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202101622 · Cited by 224
Self-citationInterfacial Charge Density and Its Connection to Adhesion and Frictional Forces
Wolloch, M., Levita, G., Restuccia, P., & Righi, M. C. (2018) · Physical Review Letters · doi:10.1103/physrevlett.121.026804 · Cited by 213
Self-citationHautier, G., Jain, A., & Ong, S. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6424-0 · Cited by 206
Rosenkranz, A., Grützmacher, P. G., Espinoza, R., Fuenzalida, V. M., Blanco, E., Escalona, N., Gracia, F. J., Villarroel, R., Guo, L., Kang, R., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.07.171 · Cited by 200
Self-citationBending rigidity of two-dimensional titanium carbide (MXene) nanoribbons: A molecular dynamics study
Borysiuk, V. N., Mochalin, V. N., & Gogotsi, Y. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2017.11.028 · Cited by 189
Self-citationThe Use of Artificial Intelligence in Tribology—A Perspective
Rosenkranz, A., Marian, M., Profito, F. J., Aragon, N., & Shah, R. (2020) · Lubricants · doi:10.3390/lubricants9010002 · Cited by 187
Self-citationInterlayer coupling in two-dimensional titanium carbide MXenes
Hu, T., Hu, M., Li, Z., Zhang, H., Zhang, C., Wang, J., & Wang, X. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01699e · Cited by 177
Toward Robust Macroscale Superlubricity on Engineering Steel Substrate
Li, P., Ju, P., Li, J., Li, H., Liu, X., Chen, L., Zhou, H., & Chen, J. (2020) · Advanced Materials · doi:10.1002/adma.202002039 · Cited by 176
Physical properties of 2D MXenes: from a theoretical perspective
Champagne, A., & Charlier, J.-C. (2021) · Journal of Physics: Materials · doi:10.1088/2515-7639/ab97ee · Cited by 168
In-situ formation of tribofilm with Ti3C2Tx MXene nanoflakes triggers macroscale superlubricity
Yi, S., Li, J., Liu, Y., Ge, X., Zhang, J., & Luo, J. (2021) · Tribology International · doi:10.1016/j.triboint.2020.106695 · Cited by 166
Lee, J. T., Wyatt, B. C., Davis, G. A., Masterson, A. N., Pagan, A. L., Shah, A., Anasori, B., & Sardar, R. (2021) · ACS Nano · doi:10.1021/acsnano.1c06670 · Cited by 160
Self-citationTribological characteristics of WS2/MoS2 solid lubricating multilayer films
Watanabe, S., Noshiro, J., & Miyake, S. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.09.063 · Cited by 159
Preparation and tribological properties of Ti 3 C 2 (OH) 2 nanosheets as additives in base oil
Zhang, X., Xue, M., Yang, X., Wang, Z., Luo, G., Huang, Z., Sui, X., & Li, C. (2014) · RSC Advances · doi:10.1039/c4ra13800g · Cited by 157
Huang, S., & Mochalin, V. N. (2020) · ACS Nano · doi:10.1021/acsnano.0c03602 · Cited by 155
Self-citationNanocomposites of MXene for industrial applications
Prakash, N. J., & Kandasubramanian, B. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158547 · Cited by 154
Ultra-Wear-Resistant MXene-Based Composite Coating via in Situ Formed Nanostructured Tribofilm
Yin, X., Jin, J., Chen, X., Rosenkranz, A., & Luo, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11449 · Cited by 153
Self-citationWon, M.-S., Penkov, O. V., & Kim, D. E. (2012) · Carbon · doi:10.1016/j.carbon.2012.12.007 · Cited by 149
Adhesion of two-dimensional titanium carbides (MXenes) and graphene to silicon
Li, Y., Huang, S., Wei, C., Wu, C., & Mochalin, V. N. (2019) · Nature Communications · doi:10.1038/s41467-019-10982-8 · Cited by 148
Self-citationMechanical and tribological properties of nanocomposites incorporated with two-dimensional materials
Ji, Z., Zhang, L., Xie, G., Xu, W., Guo, D., Luo, J., & Prakash, B. (2020) · Friction · doi:10.1007/s40544-020-0401-4 · Cited by 145
2D nano-materials beyond graphene: from synthesis to tribological studies
Rosenkranz, A., Liu, Y., Yang, L., & Chen, L. (2020) · Applied Nanoscience · doi:10.1007/s13204-020-01466-z · Cited by 144
Self-citationMarian, M., Song, G., Wang, B., Fuenzalida, V. M., Krauß, S., Merle, B., Tremmel, S., Wartzack, S. J., Yu, J., & Rosenkranz, A. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147311 · Cited by 143
Self-citationTribochemistry of graphene on iron and its possible role in lubrication of steel
Restuccia, P., & Righi, M. C. (2016) · Carbon · doi:10.1016/j.carbon.2016.05.025 · Cited by 140
Self-citationBao, Z., Bing, N., Zhu, X.-R., Xie, H.-Q., & Yu, W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126390 · Cited by 132
Effects of 2-D transition metal carbide Ti 2 CT x on properties of epoxy composites
Zhang, H., Wang, L., Zhou, A., Shen, C., Dai, Y., Liu, F., Chen, J., Li, P., & Hu, Q. (2016) · RSC Advances · doi:10.1039/c6ra14560d · Cited by 128
Spontaneous Blinking from a Tribological Viewpoint
Pult, H., Tosatti, S. G. P., Spencer, N. D., Asfour, J.-M., Ebenhoch, M., & Murphy, P. J. (2015) · The Ocular Surface · doi:10.1016/j.jtos.2014.12.004 · Cited by 127
Mechanical properties and frictional resistance of Al composites reinforced with Ti3C2T MXene
Hu, J., Li, S., Zhang, J., Chang, Q., Yu, W., & Zhou, Y. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.09.004 · Cited by 127
Serles, P., Hamidinejad, M., Demingos, P. G., Ma, L., Barri, N., Taylor, H., Singh, C. V., Park, C. B., & Filleter, T. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c00614 · Cited by 121
Host–Guest Intercalation Chemistry in MXenes and Its Implications for Practical Applications
Chen, H., Ma, H., & Li, C. (2021) · ACS Nano · doi:10.1021/acsnano.1c04423 · Cited by 115
Nano friction and adhesion properties on Ti3C2 and Nb2C MXene studied by AFM
Zhou, X., Guo, Y., Wang, D., & Xu, Q. (2020) · Tribology International · doi:10.1016/j.triboint.2020.106646 · Cited by 107
Liu, L., Ying, G., Wen, D., Zhang, K., Hu, C. F., Zheng, Y., Zhang, C., Wang, X., & Wang, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109276 · Cited by 107
2D transition metal carbides (MXenes) in metal and ceramic matrix composites
Wyatt, B. C., Nemani, S. K., & Anasori, B. (2021) · Nano Convergence · doi:10.1186/s40580-021-00266-7 · Cited by 106
Self-citationNanoscale MXene Interlayer and Substrate Adhesion for Lubrication: A Density Functional Theory Study
Marquis, E., Cutini, M., Anasori, B., Rosenkranz, A., & Righi, M. C. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c01847 · Cited by 103
Self-citationRecent development in friction of 2D materials: from mechanisms to applications
Guo, Y., Zhou, X., Lee, K., Yoon, H. C., Xu, Q., & Wang, D. (2021) · Nanotechnology · doi:10.1088/1361-6528/abfa52 · Cited by 90
Zhou, Y., Liu, M., Wang, Y., Yuan, J., & Men, X. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107328 · Cited by 82
Adhesion Between MXenes and Other 2D Materials
Li, Y., Huang, S., Wei, C., Zhou, D., Li, B., Wu, C., & Mochalin, V. N. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18624 · Cited by 80
Self-citationYi, S., Guo, Y., Li, J., Zhang, Y., Zhou, A., & Luo, J. (2022) · Friction · doi:10.1007/s40544-022-0597-6 · Cited by 77
Prediction of Nanoscale Friction for Two-Dimensional Materials Using a Machine Learning Approach
Baboukani, B. S., Ye, Z., Reyes, K. G., & Nalam, P. C. (2020) · Tribology Letters · doi:10.1007/s11249-020-01294-w · Cited by 75
Chen, J., & Zhao, W. (2020) · Tribology International · doi:10.1016/j.triboint.2020.106598 · Cited by 75
Oral tribology: update on the relevance to study astringency in wines
Laguna, L., & Sarkar, A. (2017) · Tribology - Materials Surfaces & Interfaces · doi:10.1080/17515831.2017.1347736 · Cited by 72
Excellent tribological properties of epoxy—Ti3C2 with three-dimensional nanosheets composites
Meng, F., Zhang, Z., Gao, P., Kang, R., Boyjoo, Y., Yu, J., & Liu, T. (2020) · Friction · doi:10.1007/s40544-020-0368-1 · Cited by 72
Restuccia, P., Ferrario, M., & Righi, M. C. (2019) · Carbon · doi:10.1016/j.carbon.2019.09.040 · Cited by 68
Self-citationHuang, S., & Mochalin, V. N. (2022) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.2c00537 · Cited by 68
Self-citationSynthesis of MXene-Based Self-dispersing Additives for Enhanced Tribological Properties
Changzhi, Z., Li, Z., Liu, S., Ma, L., Zhan, T., & Wang, J. (2022) · Tribology Letters · doi:10.1007/s11249-022-01605-3 · Cited by 67
Hydrophilicity-Dependent Distinct Frictional Behaviors of Different Modified MXene Nanosheets
Guan, Y., Zhang, M., Qin, J., Ma, X., Li, C., & Tang, J. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c01551 · Cited by 66
Enhancing the tribological performance of Ti3C2 MXene modified with tetradecylphosphonic acid
Feng, Q. G., Deng, F., Li, K., Dou, M., Zou, S., & Huang, F. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126903 · Cited by 66
Ti3C2-graphene oxide nanocomposite films for lubrication and wear resistance
Miao, X., Liu, S., Ma, L., Yang, Y., Zhu, J., Li, Z., & Wang, J. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107361 · Cited by 66
Tribology and Industry: From the Origins to 4.0
Ciulli, E. (2019) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2019.00055 · Cited by 65
Marian, M., Feile, K., Rothammer, B., Bartz, M., Wartzack, S. J., Seynstahl, A., Tremmel, S., Krauß, S., Merle, B., Böhm, T., et al. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101202 · Cited by 64
Self-citationA review on food oral tribology
Xu, W., Yu, S., & Zhong, M. (2022) · Friction · doi:10.1007/s40544-022-0594-9 · Cited by 57
Friction between MXenes and other two-dimensional materials at the nanoscale
Li, Y., Huang, S., Wei, C., Zhou, D., Li, B., Mochalin, V. N., & Wu, C. (2022) · Carbon · doi:10.1016/j.carbon.2022.05.012 · Cited by 56
Self-citationZhang, X., Guo, Y. P., Li, Y., Liu, Y., & Dong, S. (2018) · Chinese Chemical Letters · doi:10.1016/j.cclet.2018.07.007 · Cited by 52
Tribological Classification of Contact Lenses: From Coefficient of Friction to Sliding Work
Sterner, O., Aeschlimann, R., Zürcher, S., Scales, C., Riederer, D. E., Spencer, N. D., & Tosatti, S. G. P. (2016) · Tribology Letters · doi:10.1007/s11249-016-0696-5 · Cited by 50
Woydt, M. (2021) · Wear · doi:10.1016/j.wear.2021.204134 · Cited by 45
Ni‐Doped MoS2 Dry Film Lubricant Life
Vellore, A., Garcia, S. R., Walters, N., Johnson, D. A., Kennett, A., Heverly, M., & Martini, A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001109 · Cited by 41
Taylor, R. I. (2021) · Lubricants · doi:10.3390/lubricants9070066 · Cited by 37
High-throughput screening of the static friction and ideal cleavage strength of solid interfaces
Wolloch, M., Losi, G., Ferrario, M., & Righi, M. C. (2019) · Scientific Reports · doi:10.1038/s41598-019-49907-2 · Cited by 36
Self-citationGuan, H., Lu, X., Yao, Q., Wang, Y., Liu, X., Xia, G., & Zhao, D. L. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.09.277 · Cited by 34
Solid Lubrication Performance of Few‐ and Multilayer Ti3C2Tx Coatings
Aguilar-Hurtado, J. Y., Grützmacher, P. G., Henríquez, J. M., Zambrano-Mera, D. F., Wang, B., & Rosenkranz, A. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200755 · Cited by 28
Self-citationNanofriction Properties of Mono- and Double-Layer Ti 3 C 2 T x MXenes
Kozak, A. O., Hofbauerová, M., Halahovets, Y., Slusna, L. P., Precner, M., Mičušík, M., Orovčík, Ľ., Hulman, M., Stepura, A., Omastová, M., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c08963 · Cited by 26
Stella, M., Lorenz, C. D., & Righi, M. C. (2021) · 2D Materials · doi:10.1088/2053-1583/ac07ed · Cited by 22
Self-citationCorrelating wine astringency with physical measures – Current knowledge and future directions
Rosenkranz, A., Marian, M., Shah, R., Gashi, B., Zhang, S., Bordeu, E., & Brossard, N. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102520 · Cited by 22
Self-citation
Metadata
- Authors
- Rosenkranz, A., Righi, M. C., Sumant, A. V., Anasori, B., & Mochalin, V. N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-12-20
- Volume
- 35
- Issue
- 5
- Pages
- e2207757-e2207757
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4312094227
- Cited by
- 331
- References
- 111
- FWCI
- 17.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.