In situ covalent reinforcement of a benzene-1,3,5-tricarboxamide supramolecular polymer enables biomimetic, tough, and fibrous hydrogels and bioinks
Open accessThe DOI matches its Crossref record; 88 of the 90 references it cites were found in a registry or an index.
Abstract
Synthetic hydrogels often lack the load‐bearing capacity and mechanical properties of native biopolymers found in tissue, such as cartilage. In natural tissues, toughness is often imparted via the combination of fibrous noncovalent self‐assembly with key covalent bond formation. This controlled combination of supramolecular and covalent interactions remains difficult to engineer, yet can provide a clear strategy for advanced biomaterials. Here, a synthetic supramolecular/covalent strategy is investigated for creating a tough hydrogel that embodies the hierarchical fibrous architecture of the extracellular matrix (ECM). A benzene‐1,3,5‐tricarboxamide (BTA) hydrogelator is developed with synthetically addressable norbornene handles that self‐assembles to form a and viscoelastic hydrogel. Inspired by collagen's covalent cross‐linking of fibrils, the mechanical properties are reinforced by covalent intra‐ and interfiber cross‐links. At over 90% water, the hydrogels withstand up to 550% tensile strain, 90% compressive strain, and dissipated energy with recoverable hysteresis. The hydrogels are shear‐thinning, can be 3D bioprinted with good shape fidelity, and can be toughened via covalent cross‐linking. These materials enable the bioprinting of human mesenchymal stromal cell (hMSC) spheroids and subsequent differentiation into chondrogenic tissue. Collectively, these findings highlight the power of covalent reinforcement of supramolecular fibers, offering a strategy for the bottom‐up design of dynamic, yet tough, hydrogels and bioinks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Fiber-reinforced composites show enhanced mechanical strength and fiber-induced cell alignment in various cell studies[23, 26–30].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [26]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Double‐Network Hydrogels with Extremely High Mechanical Strength
Gong, J. P., Katsuyama, Y., Kurokawa, T., & Osada, Y. (2003) · Advanced Materials · doi:10.1002/adma.200304907 · Cited by 4,542
Functional Supramolecular Polymers
Aida, T., Meijer, E. W., & Stupp, S. I. (2012) · Science · doi:10.1126/science.1205962 · Cited by 3,696
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
In VitroChondrogenesis of Bone Marrow-Derived Mesenchymal Progenitor Cells
Johnstone, B., Hering, T. M., Caplan, A. I., Goldberg, V. M., & Yoo, J. U. (1998) · Experimental Cell Research · doi:10.1006/excr.1997.3858 · Cited by 2,382
Effects of extracellular matrix viscoelasticity on cellular behaviour
Chaudhuri, O., Cooper-White, J., Janmey, P. A., Mooney, D. J., & Shenoy, V. B. (2020) · Nature · doi:10.1038/s41586-020-2612-2 · Cited by 2,224
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Webber, M. J., Appel, E. A., Meijer, E. W., & Langer, R. (2016) · Nature Materials · doi:10.1038/nmat4474 · Cited by 1,605
The stiffness of living tissues and its implications for tissue engineering
Guimarães, C. F., Gasperini, L., Marques, A. P., & Reis, R. L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0169-1 · Cited by 1,515
Lutolf, M. P., Lauer-Fields, J. L., Schmoekel, H. G., Metters, A. T., Weber, F. E., Fields, G. B., & Hubbell, J. A. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0737381100 · Cited by 1,508
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Fracture, fatigue, and friction of polymers in which entanglements greatly outnumber cross-links
Kim, J., Zhang, G., Shi, M., & Suo, Z. (2021) · Science · doi:10.1126/science.abg6320 · Cited by 1,348
CROSS-LINKING IN COLLAGEN AND ELASTIN
Eyre, D. R., Paz, M. A., & Gallop, P. M. (1984) · Annual Review of Biochemistry · doi:10.1146/annurev.bi.53.070184.003441 · Cited by 1,309
Extracellular matrix: A dynamic microenvironment for stem cell niche
Gattazzo, F., Urciuolo, A., & Bonaldo, P. (2014) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2014.01.010 · Cited by 1,294
Translational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Nature designs tough collagen: Explaining the nanostructure of collagen fibrils
Buehler, M. J. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0603216103 · Cited by 803
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
O'Leary, L. E. R., Fallas, J. A., Bakota, E. L., Kang, M. K., & Hartgerink, J. D. (2011) · Nature Chemistry · doi:10.1038/nchem.1123 · Cited by 667
Tough Stimuli-Responsive Supramolecular Hydrogels with Hydrogen-Bonding Network Junctions
Guo, M., Pitet, L. M., Wyss, H. M., Vos, M., Dankers, P. Y. W., & Meijer, E. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500205v · Cited by 627
Self-citationVolumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Weak Hydrogen Bonding Enables Hard, Strong, Tough, and Elastic Hydrogels
Hu, X., Vatankhah‐Varnoosfaderani, M., Zhou, J., Li, Q., & Sheiko, S. S. (2015) · Advanced Materials · doi:10.1002/adma.201503724 · Cited by 596
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Rodell, C. B., Kaminski, A. L., & Burdick, J. A. (2013) · Biomacromolecules · doi:10.1021/bm401280z · Cited by 425
From supramolecular polymers to multi-component biomaterials
Goor, O. J. G. M., Hendrikse, S. I. S., Dankers, P. Y. W., & Meijer, E. W. (2017) · Chem. Soc. Rev. · doi:10.1039/c7cs00564d · Cited by 412
Bioactive scaffolds with enhanced supramolecular motion promote recovery from spinal cord injury
Álvarez, Z., Kolberg-Edelbrock, A. N., Sasselli, I. R., Ortega, J. A., Qiu, R., Syrgiannis, Z., Mirau, P. A., Chen, F., Chin, S. M., Weigand, S., et al. (2021) · Science · doi:10.1126/science.abh3602 · Cited by 410
Stress-stiffening-mediated stem-cell commitment switch in soft responsive hydrogels
Das, R. K., Gocheva, V., Hammink, R., Zouani, O. F., & Rowan, A. E. (2016) · Nature Materials · doi:10.1038/nmat4483 · Cited by 406
Zhang, K., Feng, Q., Fang, Z., Gu, L., & Bian, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00071 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Toughening hydrogels through force-triggered chemical reactions that lengthen polymer strands
Wang, Z., Zheng, X., Ouchi, T., Kouznetsova, T. B., Beech, H. K., Av-Ron, S., Matsuda, T., Bowser, B. H., Wang, S., Johnson, J. A., et al. (2021) · Science · doi:10.1126/science.abg2689 · Cited by 369
Reversible self-assembly of superstructured networks
Freeman, R., Han, M., Álvarez, Z., Lewis, J. A., Wester, J. R., Stephanopoulos, N., McClendon, M. T., Lynsky, C., Godbe, J. M., Sangji, H., et al. (2018) · Science · doi:10.1126/science.aat6141 · Cited by 353
Han, Z., Wang, P., Lu, Y., Jia, Z., Qu, S., & Yang, W. (2022) · Science Advances · doi:10.1126/sciadv.abl5066 · Cited by 322
Supramolecular–covalent hybrid polymers for light-activated mechanical actuation
Li, C., Iscen, A., Sai, H., Sato, K., Sather, N. A., Chin, S. M., Álvarez, Z., Palmer, L. C., Schatz, G. C., & Stupp, S. I. (2020) · Nature Materials · doi:10.1038/s41563-020-0707-7 · Cited by 306
Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks
Ouyang, L., Armstrong, J. P. K., Lin, Y., Wojciechowski, J. P., Lee-Reeves, C., Hachim, D., Zhou, K., Burdick, J. A., & Stevens, M. M. (2020) · Science Advances · doi:10.1126/sciadv.abc5529 · Cited by 293
Rodell, C. B., Dusaj, N. N., Highley, C. B., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201602268 · Cited by 291
A universal method to easily design tough and stretchable hydrogels
Norioka, C., Inamoto, Y., Hajime, C., Kawamura, A., & Miyata, T. (2021) · NPG Asia Materials · doi:10.1038/s41427-021-00302-2 · Cited by 283
Wang, H., Zhu, D., Paul, A., Cai, L., Enejder, A., Yang, F., & Heilshorn, S. C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605609 · Cited by 277
Molecular Basis for Cross-Linking of Actin Filaments: Structure of the α-Actinin Rod
Djinović-Carugo, K., Young, P., Gautel, M., & Saraste, M. (1999) · Cell · doi:10.1016/s0092-8674(00)81981-9 · Cited by 257
A Multiscale Model for Solute Diffusion in Hydrogels
Axpe, E., Chan, D., Offeddu, G. S., Chang, Y., Merida, D., Hernandez, H. L., & Appel, E. A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00753 · Cited by 254
Aulisa, L., Dong, H., & Hartgerink, J. D. (2009) · Biomacromolecules · doi:10.1021/bm900634x · Cited by 251
Conjoined-network rendered stiff and tough hydrogels from biogenic molecules
Xu, L., Wang, C., Cui, Y., Li, A., Qiao, Y., & Qiu, D. (2019) · Science Advances · doi:10.1126/sciadv.aau3442 · Cited by 246
Stuart, M. C. A., van de Pas, J. C., & Engberts, J. B. F. N. (2005) · Journal of Physical Organic Chemistry · doi:10.1002/poc.919 · Cited by 240
Synthetic dynamic hydrogels promote degradation-independent in vitro organogenesis
Chrisnandy, A., Blondel, D., Rezakhani, S., Broguiere, N., & Lutolf, M. P. (2022) · Nature Materials · doi:10.1038/s41563-021-01136-7 · Cited by 237
Biomimetic Supramolecular Polymer Networks Exhibiting both Toughness and Self‐Recovery
Liu, J., Tan, C. S. Y., Yu, Z., Lan, Y., Abell, C., & Scherman, O. A. (2017) · Advanced Materials · doi:10.1002/adma.201604951 · Cited by 227
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Self-citationSimultaneous covalent and noncovalent hybrid polymerizations
Yu, Z., Tantakitti, F., Yu, T., Palmer, L. C., Schatz, G. C., & Stupp, S. I. (2016) · Science · doi:10.1126/science.aad4091 · Cited by 207
Forced protein unfolding leads to highly elastic and tough protein hydrogels
Fang, J., Mehlich, A., Koga, N., Huang, J., Koga, R., Gao, X., Hu, C., Jin, C., Rief, M., Kast, J., et al. (2013) · Nature Communications · doi:10.1038/ncomms3974 · Cited by 191
Ooi, H. W., Hafeez, S., van Blitterswijk, C. A., Moroni, L., & Baker, M. B. (2017) · Mater. Horiz. · doi:10.1039/c7mh00373k · Cited by 189
Self-citationTropoelastin and Elastin Assembly
Ozsvar, J., Yang, C., Cain, S. A., Baldock, C., Tarakanova, A., & Weiss, A. S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.643110 · Cited by 154
Lou, J., Liu, F., Lindsay, C. D., Chaudhuri, O., Heilshorn, S. C., & Xia, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705215 · Cited by 152
On the biomechanical function of scaffolds for engineering load-bearing soft tissues
Stella, J. A., D’Amore, A., Wagner, W. R., & Sacks, M. S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.001 · Cited by 139
Marquardt, L. M., Doulames, V. M., Wang, A. T., Dubbin, K., Suhar, R. A., Kratochvil, M. J., Medress, Z. A., Plant, G. W., & Heilshorn, S. C. (2020) · Science Advances · doi:10.1126/sciadv.aaz1039 · Cited by 139
Covalent-supramolecular hybrid polymers as muscle-inspired anisotropic actuators
Chin, S. M., Synatschke, C. V., Liu, S., Nap, R. J., Sather, N. A., Wang, Q., Álvarez, Z., Edelbrock, A. N., Fyrner, T., Palmer, L. C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04800-w · Cited by 134
Penick, K. J., Solchaga, L. A., & Welter, J. F. (2005) · BioTechniques · doi:10.2144/000112009 · Cited by 127
O’Connell, G. D., Sen, S., & Elliott, D. M. (2011) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-011-0328-9 · Cited by 123
Crosslinking of fibrous hydrogels
Schoenmakers, D. C., Rowan, A. E., & Kouwer, P. H. J. (2018) · Nature Communications · doi:10.1038/s41467-018-04508-x · Cited by 123
Hafeez, S., Ooi, H. W., Morgan, F. L. C., Mota, C., Dettin, M., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2018) · Gels · doi:10.3390/gels4040085 · Cited by 114
Self-citation3D Bioprinting using UNIversal Orthogonal Network (UNION) Bioinks
Hull, S. M., Lindsay, C. D., Brunel, L. G., Shiwarski, D. J., Tashman, J. W., Roth, J. G., Myung, D. J., Feinberg, A. W., & Heilshorn, S. C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007983 · Cited by 105
Porous, Resorbable, Fiber-Reinforced Scaffolds Tailored for Articular Cartilage Repair
Slivka, M. A., Leatherbury, N. C., Kieswetter, K. M., & Niederauer, G. G. (2001) · Tissue Engineering · doi:10.1089/107632701753337717 · Cited by 103
Morgan, F. L. C., Fernández‐Pérez, J., Moroni, L., & Baker, M. B. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101576 · Cited by 101
Self-citationLeenders, C. M. A., Baker, M. B., Pijpers, I. A. B., Lafleur, R. P. M., Albertazzi, L., Palmans, A. R. A., & Meijer, E. W. (2016) · Soft Matter · doi:10.1039/c5sm02843d · Cited by 100
Self-citation3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure
Sather, N. A., Sai, H., Sasselli, I. R., Sato, K., Ji, W., Synatschke, C. V., Zambrotta, R. T., Edelbrock, J. F., Kohlmeyer, R. R., Hardin, J. O., et al. (2021) · Small · doi:10.1002/smll.202005743 · Cited by 97
3D Printing of Self‐Assembling Nanofibrous Multidomain Peptide Hydrogels
Farsheed, A. C., Thomas, A. J., Pogostin, B. H., & Hartgerink, J. D. (2023) · Advanced Materials · doi:10.1002/adma.202210378 · Cited by 85
Biomimetic Strain‐Stiffening Self‐Assembled Hydrogels
Wang, Y., Xu, Z. P., Lovrak, M., le Sage, V. A. A., Zhang, K., Guo, X., Eelkema, R., Mendes, E., & van Esch, J. H. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201911364 · Cited by 82
Susapto, H. H., Alhattab, D. M., Abdelrahman, S., Khan, Z. N., Alshehri, S., Kahin, K., Ge, R., Moretti, M., Emwas, A.-H. M., & Hauser, C. A. E. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04426 · Cited by 79
Similar nonlinear mechanical responses in hard and soft materials
Schmoller, K. M., & Bausch, A. R. (2013) · Nature Materials · doi:10.1038/nmat3603 · Cited by 74
Trends in Double Networks as Bioprintable and Injectable Hydrogel Scaffolds for Tissue Regeneration
Aldana, A. A., Houben, S., Moroni, L., Baker, M. B., & Pitet, L. M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01749 · Cited by 66
Self-citationDecarli, M. C., Seijas‐Gamardo, A., Morgan, F. L. C., Wieringa, P. A., Baker, M. B., da Silva, J. V. L., Moraes, Â. M., Moroni, L., & Mota, C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203021 · Cited by 63
Self-citationStrain-Stiffening in Dynamic Supramolecular Fiber Networks
Romera, M. F., Lou, X., Schill, J., ter Huurne, G. M., Fransen, P.-P. K. H., Voets, I. K., Storm, C., & Sijbesma, R. P. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09289 · Cited by 62
Tuning viscoelastic properties of supramolecular peptide gels via dynamic covalent crosslinking
Khalily, M. A., Goktas, M., & Guler, M. O. (2014) · Organic & Biomolecular Chemistry · doi:10.1039/c4ob02217c · Cited by 61
Hedegaard, C. L., & Mata, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cb · Cited by 58
Hafeez, S., Aldana, A. A., Duimel, H., Ruiter, F. A. A., Decarli, M. C., LaPointe, V. L. S., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2023) · Advanced Materials · doi:10.1002/adma.202207053 · Cited by 57
Self-citationFrom supramolecular polymers to hydrogel materials
Leenders, C. M. A., Mes, T., Baker, M. B., Koenigs, M. M. E., Besenius, P., Palmans, A. R. A., & Meijer, E. W. (2013) · Materials Horizons · doi:10.1039/c3mh00103b · Cited by 56
Self-citationOkesola, B. O., Lau, H. K., Derkus, B., Boccorh, D. K., Wu, Y., Wark, A. W., Kiick, K. L., & Mata, A. (2020) · Biomaterials Science · doi:10.1039/c9bm01796h · Cited by 53
Edelbrock, A. N., Clemons, T. D., Chin, S. M., Roan, J. J. W., Bruckner, E. P., Álvarez, Z., Edelbrock, J. F., Wek, K. S., & Stupp, S. I. (2021) · Advanced Science · doi:10.1002/advs.202004042 · Cited by 53
Synthesis of Complex Molecular Systems─The Foreseen Role of Organic Chemists
Schnitzer, T., & Vantomme, G. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00974 · Cited by 48
Bakht, S. M., Gómez‐Florit, M., Lamers, T., Reis, R. L., Domingues, R. M. A., & Gomes, M. E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104245 · Cited by 47
Way, A. E., Korpusik, A. B., Dorsey, T. B., Buerkle, L. E., von Recum, H. A., & Rowan, S. J. (2014) · Macromolecules · doi:10.1021/ma402618z · Cited by 46
Relationship between the Intra and Inter molecular Cross-links of Collagen
Kang, A. H., & Gross, J. (1970) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.67.3.1307 · Cited by 38
Crosslinker‐Induced Effects on the Gelation Pathway of a Low Molecular Weight Hydrogel
Noteborn, W. E. M., Zwagerman, D. N. H., Talens, V. S., Maity, C., van der Mee, L., Poolman, J. M., Mytnyk, S., van Esch, J. H., Kros, A., Eelkema, R., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603769 · Cited by 29
Decarli, M. C., de Castro, M. V., Nogueira, J. A., Nagahara, M. H. T., Westin, C. B., de Oliveira, A. L. R., da Silva, J. V. L., Moroni, L., Mota, C., & Moraes, Â. M. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2022.112685 · Cited by 27
Self-citationHafeez, S., Ooi, H. W., Suylen, D. P. L., Duimel, H., Hackeng, T. M., van Blitterswijk, C., & Baker, M. B. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c12685 · Cited by 22
Self-citationFrapbot: An open‐source application for FRAP data
Kohze, R., Dieteren, C. E. J., Koopman, W. J. H., Brock, R. E., & Schmidt, S. (2017) · Cytometry Part A · doi:10.1002/cyto.a.23172 · Cited by 21
Supramolecular Biomaterials in the Netherlands
Baker, M. B., Bosman, A. W., Cox, M. A. J., Dankers, P. Y. W., Dias, A. A., Jonkheijm, P., & Kieltyka, R. E. (2022) · Tissue Engineering Part A · doi:10.1089/ten.tea.2022.0010 · Cited by 8
Self-citation
Cited by
Chen, C., Pang, X., Li, Y., & Yu, X. (2023) · Small · doi:10.1002/smll.202305875 · Cited by 83
Rijns, L., Baker, M. B., & Dankers, P. Y. W. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c02980 · Cited by 91
Self-citationGórnicki, T., Lambrinow, J., Golkar‐Narenji, A., Data, K., Domagała, D., Niebora, J., Farzaneh, M., Mozdziak, P. E., Zabel, M., Antosik, P., et al. (2024) · Nanomaterials · doi:10.3390/nano14060531 · Cited by 78
“Current research focuses on in situ bioprinting applications for direct cartilage repair [101,102] or bioprinting human mesenchymal cells that will transdifferentiate into chondrogenic tissue [103].”
BackgroundStimuli-Responsive Polymers at the Interface with Biology
Boase, N. R. B., Gillies, E. R., Goh, R. Z. R., Kieltyka, R. E., Matson, J. B., Meng, F., Sanyal, A., & Sedláček, O. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00690 · Cited by 58
A Strong and Tough Thermosetting Epoxy Resin for Recyclable High‐Performance Composites
Pei, D., Wang, P., Hao, J., Zi, Y., Zhang, O., Yang, J., Tang, J., & Hu, J. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202505526 · Cited by 54
Metadata
- Authors
- Hafeez, S., Decarli, M. C., Aldana, A., Ebrahimi, M., Ruiter, F. A. A., Duimel, H., van Blitterswijk, C., Pitet, L. M., Moroni, L., & Baker, M. B.
- Affiliations
- Maastricht University (NL)
- Department of Complex Tissue Regeneration MERLN Institute for Technology‐Inspired Regenerative Medicine Maastricht University P.O. Box 616 Maastricht 6200 MD The Netherlands
- Hasselt University (BE)
- Maastricht MultiModal Molecular Imaging Institute P.O. Box 616 Maastricht 6200 MD The Netherlands
- Corresponding author
- Baker, Matthew B.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-07-30
- Volume
- 35
- Issue
- 35
- Pages
- e2301242-e2301242
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4382344837
- Cited by
- 48
- References
- 90
- Citations by year
- 2026: 10 · 2025: 22 · 2024: 15 · 2023: 1
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Research Publications (Maastricht University) (publishedVersion, cc-by)
- Document Server@UHasselt (UHasselt) (submittedVersion, cc-by)
- Funders
- European Commission (101028471, 953169, HORIZON2020)
- Fonds Wetenschappelijk Onderzoek (G080020N)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (731.016.202)
- Vlaamse regering
- H2020 European Research Council (694801)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Supramolecular Self-Assembly in Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- benzene-1,3,5-tricarboxamide, supramolecular hydrogels, covalent cross-linking, norbornene, hydrogel toughening, fibrous hydrogels, biomimetic hydrogels, bioinks, 3D bioprinting, mesenchymal stem cells, chondrogenic differentiation, extracellular matrix, viscoelasticity, shear thinning, cartilage tissue engineering
- MeSH terms
- Benzamides, Extracellular Matrix, Humans, Polymers, Hydrogels, Tissue Engineering, Biomimetics, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.