CoChat

Ultrastretchable Strain Sensors Using Carbon Black‐Filled Elastomer Composites and Comparison of Capacitive Versus Resistive Sensors

Open access
Shintake, Jun, Piskarev, Yegor, Jeong, Seung Hee, Floreano, Dario · 2018 · Advanced Materials Technologies

The DOI matches its Crossref record; 44 of the 45 references it cites were found in a registry or an index.

Abstract

The advent of soft robotics has led to the development of devices that harness the compliance and natural deformability of media with nonlinear elasticity. This has led to a need of batch‐manufacturable soft sensors that can sustain large strains and maintain kinematic compatibility with the systems they track. In this article, an approach to address this challenge is presented with highly stretchable strain sensors that can operate at strains up to 500%. The sensors consist of a carbon black‐filled elastomer composite that is batch manufactured using film‐casting techniques and CO 2 laser ablation. This process facilitates the rapid multilayered fabrication of both capacitive and resistive sensing elements. When measuring capacitance, these sensors exhibit high linearity ( R 2 = 0.9995), low hysteresis under cyclic loading with varying strain amplitude (50–500%), and high repeatability (≥10 4 cycles). The sensors possess gauge factors of 0.83–0.98 in capacitive mode and 1.62–3.37 in resistive mode.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/admt.201700284

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 44 references

Research works printed but not linked: 7

  1. Sanan S., 2011, Annual Int. Conf. of the IEEE Engineering in Medicine and Biology Society
  2. Alspach A., 2015, IEEE‐RAS 15th Int.Conf. on Humanoid Robots
  3. Wehner M., 2013, IEEE Int. Conf. on Robotics and Automation
  4. Mengüç Y., 2013, IEEE Int. Conf. on Robotics and Automation
  5. Accorsi J., 1995, Plast. Eng., 51, 29
  6. Rosset S., 2016, J. Vis. Exp., 53423
  7. Williams G., 2006, Dielectric Properties of Polymers. Materials Science and Technology

Cited by

Metadata

Authors
Shintake, J., Piskarev, Y., Jeong, S. H., & Floreano, D.
Affiliations
École Polytechnique Fédérale de Lausanne (CH)
Corresponding author
Floreano, Dario
Venue
Advanced Materials Technologies
Publisher
Wiley
Published
2017-12-27
Volume
3
Issue
3
ISSN
2365-709X (ISSN-L)
OpenAlex
W2775787671
Cited by
332
References
45
Citations by year
2026: 25 · 2025: 37 · 2024: 45 · 2023: 50 · 2022: 55 · 2021: 44 · 2020: 39 · 2019: 27 · 2018: 10
FWCI
9.38
Type
journal article
Language
en
Open access
Locations
  • Advanced Materials Technologies (publishedVersion)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
Funders
National Center of Competence in Research Affective Sciences - Emotions in Individual Behaviour and Social Processes
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
Keywords
capacitive sensors, resistive sensors, soft sensors, soft robotics, CO2 laser ablation, film casting, gauge factor, hysteresis, batch production

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.