Ultrastretchable Strain Sensors Using Carbon Black‐Filled Elastomer Composites and Comparison of Capacitive Versus Resistive Sensors
Open accessThe DOI matches its Crossref record; 44 of the 45 references it cites were found in a registry or an index.
Abstract
The advent of soft robotics has led to the development of devices that harness the compliance and natural deformability of media with nonlinear elasticity. This has led to a need of batch‐manufacturable soft sensors that can sustain large strains and maintain kinematic compatibility with the systems they track. In this article, an approach to address this challenge is presented with highly stretchable strain sensors that can operate at strains up to 500%. The sensors consist of a carbon black‐filled elastomer composite that is batch manufactured using film‐casting techniques and CO 2 laser ablation. This process facilitates the rapid multilayered fabrication of both capacitive and resistive sensing elements. When measuring capacitance, these sensors exhibit high linearity ( R 2 = 0.9995), low hysteresis under cyclic loading with varying strain amplitude (50–500%), and high repeatability (≥10 4 cycles). The sensors possess gauge factors of 0.83–0.98 in capacitive mode and 1.62–3.37 in resistive mode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Compared with resistive sensors, capacitive sensors have excellent linearity with lower power consumption.[119]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [119]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Zeng, W., Shu, L., Li, Q., Chen, S., Wang, F., & Tao, X. (2014) · Advanced Materials · doi:10.1002/adma.201400633 · Cited by 2,019
Soft robotic glove for combined assistance and at-home rehabilitation
Polygerinos, P., Wang, Z., Galloway, K. C., Wood, R. J., & Walsh, C. J. (2015) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2014.08.014 · Cited by 1,617
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Elasticity: Theory, Applications, and Numerics
Sadd, M. H. (2006) · Cited by 1,432
A Resilient, Untethered Soft Robot
Tolley, M. T., Shepherd, R. F., Mosadegh, B., Galloway, K. C., Wehner, M., Karpelson, M., Wood, R. J., & Whitesides, G. M. (2014) · Soft Robotics · doi:10.1089/soro.2014.0008 · Cited by 1,089
Roh, E., Hwang, B.-U., Kim, D., Kim, B.-Y., & Lee, N.-E. (2015) · ACS Nano · doi:10.1021/acsnano.5b01613 · Cited by 927
Carbon black filled conducting polymers and polymer blends
Huang, J. (2002) · Advances in Polymer Technology · doi:10.1002/adv.10025 · Cited by 850
Research works printed but not linked: 7
- Sanan S., 2011, Annual Int. Conf. of the IEEE Engineering in Medicine and Biology Society
- Alspach A., 2015, IEEE‐RAS 15th Int.Conf. on Humanoid Robots
- Wehner M., 2013, IEEE Int. Conf. on Robotics and Automation
- Mengüç Y., 2013, IEEE Int. Conf. on Robotics and Automation
- Accorsi J., 1995, Plast. Eng., 51, 29
- Rosset S., 2016, J. Vis. Exp., 53423
- Williams G., 2006, Dielectric Properties of Polymers. Materials Science and Technology
Cited by
Shintake, J., Cacucciolo, V., Floreano, D., & Shea, H. (2018) · Advanced Materials · doi:10.1002/adma.201707035 · Cited by 1,938
Self-citationYang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
Wearable and Stretchable Strain Sensors: Materials, Sensing Mechanisms, and Applications
Souri, H., Banerjee, H., Jusufi, A., Radacsi, N., Stokes, A. A., Park, I., Sitti, M., & Amjadi, M. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000039 · Cited by 681
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Flexible Hybrid Sensors for Health Monitoring: Materials and Mechanisms to Render Wearability
Gao, Y., Yu, L., Yeo, J. C., & Lim, C. T. (2020) · Advanced Materials · doi:10.1002/adma.201902133 · Cited by 505
Metadata
- Authors
- Shintake, J., Piskarev, Y., Jeong, S. H., & Floreano, D.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Floreano, Dario
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2017-12-27
- Volume
- 3
- Issue
- 3
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2775787671
- Cited by
- 332
- References
- 45
- Citations by year
- 2026: 25 · 2025: 37 · 2024: 45 · 2023: 50 · 2022: 55 · 2021: 44 · 2020: 39 · 2019: 27 · 2018: 10
- FWCI
- 9.38
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- Advanced Materials Technologies (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Funders
- National Center of Competence in Research Affective Sciences - Emotions in Individual Behaviour and Social Processes
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- capacitive sensors, resistive sensors, soft sensors, soft robotics, CO2 laser ablation, film casting, gauge factor, hysteresis, batch production
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.