The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
Laser‐Induced Forward Transfer: Fundamentals and Applications
Abstract
Laser‐induced forward transfer (LIFT) is a digital printing technique that uses a pulsed laser beam as the driving force to project material from a donor thin film toward the receiving substrate whereon that material will be finally deposited as a voxel. This working principle allows LIFT to operate with both solid and liquid donor films, which provides the technique with an unprecedented broad spectrum of printable materials, and thus makes it very competitive over other digital technologies, like inkjet printing. It is not only that LIFT can access a much wider range of ink viscosities and loading particle sizes; the possibility of printing from solid films allows the single‐step printing of multilayers and entire devices, and even makes possible 3D printing. This versatility translates, in turn, into a broad field of applications, from graphics production to printed electronics, from the fabrication of chemical sensors to tissue engineering. This monograph provides an extensive review of the LIFT technique, from its origins to the most recent achievements, focusing on the fundamental aspects of both its working principle and transfer dynamics, as well as on its broad range of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cramming More Components Onto Integrated Circuits
Moore, G. E. (1998) · Proceedings of the IEEE · doi:10.1109/jproc.1998.658762 · Cited by 5,926
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Electrolyte‐Gated Transistors for Organic and Printed Electronics
Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., Lodge, T. P., & Frisbie, C. D. (2013) · Advanced Materials · doi:10.1002/adma.201202790 · Cited by 957
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A. (2012) · Advanced Materials · doi:10.1002/adma.201201386 · Cited by 917
Vogel, A., Busch, S., & Parlitz, U. (1996) · The Journal of the Acoustical Society of America · doi:10.1121/1.415878 · Cited by 770
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Energy balance of optical breakdown in water at nanosecond to femtosecond time scales
Vogel, A., Noack, J., Nahen, K., Theisen, D., Busch, S., Parlitz, U., Hammer, D. X., Noojin, G. D., Rockwell, B. A., & Birngruber, R. (1999) · Applied Physics B · doi:10.1007/s003400050617 · Cited by 546
Laser Deposition of Polymer and Biomaterial Films
Chrisey, D. B., Piqué, A., McGill, R. A., Horwitz, J. S., Ringeisen, B. R., Bubb, D. M., & Wu, P. K. (2003) · Chemical Reviews · doi:10.1021/cr010428w · Cited by 495
Self-citation
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Wu, K.-J., Tse, E. C. M., Shang, C., & Guo, Z. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100821 · Cited by 400
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Metadata
- Authors
- Serra, P., & Piqué, A.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2018-08-08
- Volume
- 4
- Issue
- 1
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2885776607
- Cited by
- 358
- References
- 118
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.