The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
Laser‐Induced Forward Transfer: Fundamentals and Applications
Abstract
Laser‐induced forward transfer (LIFT) is a digital printing technique that uses a pulsed laser beam as the driving force to project material from a donor thin film toward the receiving substrate whereon that material will be finally deposited as a voxel. This working principle allows LIFT to operate with both solid and liquid donor films, which provides the technique with an unprecedented broad spectrum of printable materials, and thus makes it very competitive over other digital technologies, like inkjet printing. It is not only that LIFT can access a much wider range of ink viscosities and loading particle sizes; the possibility of printing from solid films allows the single‐step printing of multilayers and entire devices, and even makes possible 3D printing. This versatility translates, in turn, into a broad field of applications, from graphics production to printed electronics, from the fabrication of chemical sensors to tissue engineering. This monograph provides an extensive review of the LIFT technique, from its origins to the most recent achievements, focusing on the fundamental aspects of both its working principle and transfer dynamics, as well as on its broad range of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cramming More Components Onto Integrated Circuits
Moore, G. E. (1998) · Proceedings of the IEEE · doi:10.1109/jproc.1998.658762 · Cited by 5,926
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Electrolyte‐Gated Transistors for Organic and Printed Electronics
Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., Lodge, T. P., & Frisbie, C. D. (2013) · Advanced Materials · doi:10.1002/adma.201202790 · Cited by 957
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A. (2012) · Advanced Materials · doi:10.1002/adma.201201386 · Cited by 917
Vogel, A., Busch, S., & Parlitz, U. (1996) · The Journal of the Acoustical Society of America · doi:10.1121/1.415878 · Cited by 770
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Energy balance of optical breakdown in water at nanosecond to femtosecond time scales
Vogel, A., Noack, J., Nahen, K., Theisen, D., Busch, S., Parlitz, U., Hammer, D. X., Noojin, G. D., Rockwell, B. A., & Birngruber, R. (1999) · Applied Physics B · doi:10.1007/s003400050617 · Cited by 546
Laser Deposition of Polymer and Biomaterial Films
Chrisey, D. B., Piqué, A., McGill, R. A., Horwitz, J. S., Ringeisen, B. R., Bubb, D. M., & Wu, P. K. (2003) · Chemical Reviews · doi:10.1021/cr010428w · Cited by 495
Self-citationLaser printing of silicon nanoparticles with resonant optical electric and magnetic responses
Zywietz, U., Evlyukhin, A. B., Reinhardt, C., & Chichkov, B. N. (2014) · Nature Communications · doi:10.1038/ncomms4402 · Cited by 494
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Structure of Hydrous Ruthenium Oxides: Implications for Charge Storage
McKeown, D. A., Hagans, P. L., Carette, L. P. L., Russell, A. E., Swider, K. E., & Rolison, D. R. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp990096n · Cited by 416
Laser Direct-Write Techniques for Printing of Complex Materials
Arnold, C. B., Serra, P., & Piqué, A. (2007) · MRS Bulletin · doi:10.1557/mrs2007.11 · Cited by 360
Self-citationPatterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Microfabrication in Biology and Medicine
Voldman, J., Gray, M. L., & Schmidt, M. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.401 · Cited by 344
Laser-based direct-write techniques for cell printing
Schiele, N. R., Corr, D. T., Huang, Y., Raof, N. A., Xie, Y., & Chrisey, D. B. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/032001 · Cited by 334
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Chemical and Spectroscopic Aspects of Polymer Ablation: Special Features and Novel Directions
Lippert, T., & Dickinson, J. T. (2003) · Chemical Reviews · doi:10.1021/cr010460q · Cited by 316
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
Visser, C. W., Pohl, R., Sun, C., Römer, G., Huis in ‘t Veld, B., & Lohse, D. (2015) · Advanced Materials · doi:10.1002/adma.201501058 · Cited by 282
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Laser-guided direct writing for applications in biotechnology
Odde, D. J., & Renn, M. J. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 278
Vogel, A., Nahen, K., Theisen, D., & Noack, J. (1996) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.577307 · Cited by 275
Guillemot, F., Souquet, A., Catros, S., & Guillotin, B. (2010) · Nanomedicine · doi:10.2217/nnm.10.14 · Cited by 268
Dynamics of femtosecond laser-induced breakdown in water from femtoseconds to microseconds
Schaffer, C. B., Nishimura, N., Glezer, E. N., Kim, A. M.-T., & Mazur, E. (2002) · Optics Express · doi:10.1364/oe.10.000196 · Cited by 258
Large area, high resolution, dry printing of conducting polymers for organic electronics
Blanchet, G. B., Loo, Y.-L., Rogers, J. A., Gao, F., & Fincher, C. R. (2003) · Applied Physics Letters · doi:10.1063/1.1533110 · Cited by 257
Laser Fabrication of Large-Scale Nanoparticle Arrays for Sensing Applications
Kuznetsov, A. I., Evlyukhin, A. B., Gonçalves, M. R., Reinhardt, C., Koroleva, A., Arnedillo, M. L., Kiyan, R., Marti, O., & Chichkov, B. N. (2011) · ACS Nano · doi:10.1021/nn2009112 · Cited by 253
Conductor microstructures by laser curing of printed gold nanoparticle ink
Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P., & Poulikakos, D. (2004) · Applied Physics Letters · doi:10.1063/1.1644907 · Cited by 252
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Application of laser printing to mammalian cells
Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242
Laser Printing of Single Cells: Statistical Analysis, Cell Viability, and Stress
Barron, J. A., Krizman, D. B., & Ringeisen, B. R. (2005) · Annals of Biomedical Engineering · doi:10.1007/s10439-005-8971-x · Cited by 227
Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227
Interaction of cavitation bubbles with a free surface
Robinson, P. B., Blake, J. R., Kodama, T., SHIMA, A., & TOMITA, Y. (2001) · Journal of Applied Physics · doi:10.1063/1.1368163 · Cited by 225
Recent advances in upscalable wet methods and ink formulations for printed electronics
Aleeva, Y., & Pignataro, B. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00618f · Cited by 225
DNA deposition through laser induced forward transfer
Colina, M., Serra, P., Fernández-Pradas, J. M., Sevilla, L., & Morenza, J. L. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.08.047 · Cited by 217
Self-citationKattamis, N. T., Purnick, P. E., Weiss, R., & Arnold, C. B. (2007) · Applied Physics Letters · doi:10.1063/1.2799877 · Cited by 217
Wu, P. K., Ringeisen, B. R., Callahan, J., Brooks, M., Bubb, D. M., Wu, H. D., Piqué, A., Spargo, B., McGill, R. A., & Chrisey, D. B. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)01347-5 · Cited by 175
Self-citationNanotexturing of gold films by femtosecond laser-induced melt dynamics
Koch, J., Korte, F., Bauer, T., Fallnich, C., Ostendorf, A., & Chichkov, B. N. (2005) · Applied Physics A · doi:10.1007/s00339-005-3212-6 · Cited by 172
Microdeposition of metal and oxide structures using ultrashort laser pulses
Zergioti, I., Mailis, S., Vainos, N. A., Papakonstantinou, P., Kalpouzos, C., Grigoropoulos, C. P., & Fotakis, C. (1998) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390050717 · Cited by 170
Wu, P. K., & Ringeisen, B. R. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014111 · Cited by 168
Koch, L., Gruene, M., Unger, C., & Chichkov, B. (2013) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201011314010012 · Cited by 166
Inkjet and Aerosol Jet Printing of Electrochemical Devices for Energy Conversion and Storage
Deiner, L. J., & Reitz, T. L. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600878 · Cited by 166
Time-resolved imaging of the laser forward transfer of liquids
Duocastella, M., Fernández-Pradas, J. M., Morenza, J. L., & Serra, P. (2009) · Journal of Applied Physics · doi:10.1063/1.3248304 · Cited by 165
Self-citationGruene, M., Pflaum, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Wilhelmi, M., Haverich, A., & Chichkov, B. N. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/015005 · Cited by 158
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Laser-induced forward transfer of liquids: Study of the droplet ejection process
Colina, M., Duocastella, M., Fernández-Pradas, J. M., Serra, P., & Morenza, J. L. (2006) · Journal of Applied Physics · doi:10.1063/1.2191569 · Cited by 153
Self-citationDirected Three-Dimensional Patterning of Self-Assembled Peptide Fibrils
Dinca, V. C., Kasotakis, E., Catherine, J., Mourka, A., Ranella, A., Ovsianikov, A., Chichkov, B. N., Farsari, M., Mitraki, A., & Fotakis, C. (2007) · Nano Letters · doi:10.1021/nl072798r · Cited by 148
Wu, P., Ringeisen, B. R., Krizman, D. B., Frondoza, C. G., Brooks, M., Bubb, D. M., Auyeung, R. C. Y., Piqué, A., Spargo, B. J., McGill, R. A., et al. (2003) · Review of Scientific Instruments · doi:10.1063/1.1544081 · Cited by 145
Self-citationGeneration of mesoscopic patterns of viable Escherichia coli by ambient laser transfer
Ringeisen, B. R., Chrisey, D. B., Piqué, A., Young, D., Modi, R., Bucaro, M. A., Jones‐Meehan, J., & Spargo, B. J. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00091-6 · Cited by 143
Self-citationCatros, S., Guillotin, B., Bačáková, M., Fricain, J., & Guillemot, F. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.049 · Cited by 140
Time-resolved imaging of hydrogel printing via laser-induced forward transfer
Unger, C., Gruene, M., Koch, L., Koch, J., & Chichkov, B. N. (2010) · Applied Physics A · doi:10.1007/s00339-010-6030-4 · Cited by 139
Nanostructuring of thin gold films by femtosecond lasers
Kuznetsov, A. I., Koch, J., & Chichkov, B. N. (2008) · Applied Physics A · doi:10.1007/s00339-008-4859-6 · Cited by 135
Laser-induced jet formation and droplet ejection from thin metal films
Kuznetsov, A. I., Unger, C., Koch, J., & Chichkov, B. N. (2012) · Applied Physics A · doi:10.1007/s00339-011-6747-8 · Cited by 134
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Gruene, M., Unger, C., Koch, L., Deiwick, A., & Chichkov, B. N. (2011) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-10-19 · Cited by 132
Laser-assisted printing of alginate long tubes and annular constructs
Yan, J., Huang, Y. H., & Chrisey, D. B. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015002 · Cited by 130
Piqué, A., Auyeung, R. C. Y., Kim, H., Charipar, N. A., & Mathews, S. A. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/22/223001 · Cited by 123
Self-citationFemtosecond laser microprinting of biomaterials
Zergioti, I., Karaiskou, A., Papazoglou, D. G., et al. (2005) · Applied Physics Letters · doi:10.1063/1.1906325 · Cited by 116
Printing of protein microarrays via a capillary‐free fluid jetting mechanism
Barron, J. A., Young, D., Dlott, D. D., Darfler, M. M., Krizman, D. B., & Ringeisen, B. R. (2005) · PROTEOMICS · doi:10.1002/pmic.200401294 · Cited by 115
Laser jetting of femto-liter metal droplets for high resolution 3D printed structures
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Scientific Reports · doi:10.1038/srep17265 · Cited by 111
Laser fabrication of 2D and 3D metal nanoparticle structures and arrays
Kuznetsov, A. I., Kiyan, R. V., & Chichkov, B. N. (2010) · Optics Express · doi:10.1364/oe.18.021198 · Cited by 110
Single-cell printing to form three-dimensional lines of olfactory ensheathing cells
Othon, C. M., Wu, X., Anders, J. J., & Ringeisen, B. R. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034101 · Cited by 108
Laser-printed thick-film electrodes for solid-state rechargeable Li-ion microbatteries
Kim, H., Auyeung, R. C. Y., & Piqué, A. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.11.053 · Cited by 99
Self-citationBoutopoulos, C., Kalpyris, I., Serpetzoglou, E., et al. (2013) · Microfluidics and Nanofluidics · doi:10.1007/s10404-013-1248-z · Cited by 98
Impulsively actuated jets from thin liquid films for high-resolution printing applications
Brown, M. S., Brasz, C. F., Ventikos, Y., et al. (2012) · Journal of Fluid Mechanics · doi:10.1017/jfm.2012.337 · Cited by 98
Zhang, Z., Xiong, R., Mei, R., Huang, Y. H., & Chrisey, D. B. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b00919 · Cited by 96
The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells
Raof, N. A., Schiele, N. R., Xie, Y., Chrisey, D. B., & Corr, D. T. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.11.015 · Cited by 94
PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP™
Pirlo, R. K., Wu, P., Liu, J., & Ringeisen, B. R. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23295 · Cited by 93
Dinca, V. C., Farsari, M., Kafetzopoulos, D., Popescu, A., Dinescu, M., & Fotakis, C. (2008) · Thin Solid Films · doi:10.1016/j.tsf.2008.02.043 · Cited by 90
Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Small · doi:10.1002/smll.201500612 · Cited by 82
Schiele, N. R., Koppes, R. A., Corr, D. T., Ellison, K. S., Thompson, D. M., Ligon, L. A., Lippert, T. K., & Chrisey, D. B. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.10.054 · Cited by 81
Methodology for Inkjet Printing of Partially Wetting Films
Soltman, D., Smith, B., Kang, H., Morris, S. J., & Subramanian, V. (2010) · Langmuir · doi:10.1021/la102053j · Cited by 80
Laser-generated liquid microjets: correlation between bubble dynamics and liquid ejection
Patrascioiu, A., Fernández-Pradas, J. M., Palla-Papavlu, A., Morenza, J. L., & Serra, P. (2013) · Microfluidics and Nanofluidics · doi:10.1007/s10404-013-1218-5 · Cited by 79
Self-citationNovel laser printing technique for miniaturized biosensors preparation
Duocastella, M., Fernández-Pradas, J. M., Morenza, J. L., Zafra, D., & Serra, P. (2009) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2009.11.055 · Cited by 78
Self-citationChen, C. Y., Barron, J. A., & Ringeisen, B. R. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2005.11.088 · Cited by 75
Laser microfabrication of hydroxyapatite‐osteoblast‐like cell composites
Doraiswamy, A., Narayan, R. J., Harris, M. L., Qadri, S. B., Modi, R., & Chrisey, D. B. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30969 · Cited by 74
Pietrantonio, F. D., Benetti, M., Cannatà, D., Verona, E., Palla-Papavlu, A., Dinca, V. C., Dinescu, M., Mattle, T., & Lippert, T. K. (2012) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2012.07.106 · Cited by 74
Laser direct write printing of sensitive and robust light emitting organic molecules
Kattamis, N. T., McDaniel, N. D., Bernhard, S., & Arnold, C. B. (2009) · Applied Physics Letters · doi:10.1063/1.3098375 · Cited by 72
Generation and patterning of Si nanoparticles by femtosecond laser pulses
Zywietz, U., Reinhardt, C., Evlyukhin, A. B., Birr, T., & Chichkov, B. N. (2013) · Applied Physics A · doi:10.1007/s00339-013-8007-6 · Cited by 72
Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing
Wang, W., Li, G., & Huang, Y. H. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000101 · Cited by 66
Finite element analysis of blister formation in laser-induced forward transfer
Kattamis, N. T., Brown, M. S., & Arnold, C. B. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2011.215 · Cited by 64
Printing biological solutions through laser-induced forward transfer
Duocastella, M., Fernández-Pradas, J. M., Domínguez, J., Serra, P., & Morenza, J. L. (2008) · Applied Physics A · doi:10.1007/s00339-008-4741-6 · Cited by 62
Self-citationPolymer/carbon nanotube composite patterns via laser induced forward transfer
Boutopoulos, C., Pandis, C., Giannakopoulos, K. P., Pissis, P., & Zergioti, I. (2010) · Applied Physics Letters · doi:10.1063/1.3299004 · Cited by 61
Laser forward transfer based on a spatial light modulator
Auyeung, R. C. Y., Kim, H., Charipar, N. A., et al. (2010) · Applied Physics A · doi:10.1007/s00339-010-6054-9 · Cited by 60
Laser-assisted ultrathin die packaging: Insights from a process study
Marinov, V. R., Swenson, O. F., Atanasov, Y., & Schneck, N. (2012) · Microelectronic Engineering · doi:10.1016/j.mee.2012.08.016 · Cited by 57
Araki, T., Mandamparambil, R., van Bragt, D. M. P., Jiu, J., Koga, H., van den Brand, J., Sekitani, T., den Toonder, J. M. J., & Suganuma, K. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/45/45lt02 · Cited by 57
Fabrication of terahertz metamaterials by laser printing
Kim, H., Melinger, J. S., Khachatrian, A., Charipar, N. A., Auyeung, R. C. Y., & Piqué, A. (2010) · Optics Letters · doi:10.1364/ol.35.004039 · Cited by 56
Self-citationTime-resolved shadowgraph imaging of femtosecond laser-induced forward transfer of solid materials
Feinaeugle, M., Alloncle, A., Delaporte, P. C., Sones, C. L., & Eason, R. W. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.101 · Cited by 56
Film-free laser forward printing of transparent and weakly absorbing liquids
Duocastella, M., Patrascioiu, A., Fernández-Pradas, J. M., Morenza, J. L., & Serra, P. (2010) · Optics Express · doi:10.1364/oe.18.021815 · Cited by 55
Self-citationFlip-chip assembly of VCSELs to silicon grating couplers via laser fabricated SU8 prisms
Kaur, K., Subramanian, A. Z., Cardile, P., Verplancke, R., Kerrebrouck, J. V., Spiga, S., Meyer, R., Bauwelinck, J., Baets, R., & Steenberge, G. V. (2015) · Optics Express · doi:10.1364/oe.23.028264 · Cited by 51
Effect of laser fluence on yeast cell viability in laser-assisted cell transfer
Lin, Y., Huang, Y. H., Wang, G., Tzeng, T.-R. J., & Chrisey, D. B. (2009) · Journal of Applied Physics · doi:10.1063/1.3202388 · Cited by 51
Laser-induced forward transfer for printed electronics applications
Fernández-Pradas, J. M., Sopeña, P., González‐Torres, S., Arrese, J., Cirera, A., & Serra, P. (2018) · Applied Physics A · doi:10.1007/s00339-018-1648-8 · Cited by 49
Self-citationNano- and Microdot Array Formation of FeSi2by Nanosecond Excimer Laser-Induced Forward Transfer
Narazaki, A., Sato, T., Kurosaki, R., et al. (2008) · Applied Physics Express · doi:10.1143/apex.1.057001 · Cited by 48
Biver, É., Rapp, L., Alloncle, A., et al. (2014) · Optics Express · doi:10.1364/oe.22.017122 · Cited by 47
Ballistic laser-assisted solid transfer (BLAST) from a thin film precursor
Banks, D. P., Grivas, C., Zergioti, I., et al. (2008) · Optics Express · doi:10.1364/oe.16.003249 · Cited by 47
Laser-induced forward transfer technique for maskless patterning of amorphous V2O5 thin film
Chakraborty, S., Sakata, H., Yokoyama, E., et al. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.06.066 · Cited by 37
Sub-wavelength Laser Nanopatterning using Droplet Lenses
Duocastella, M., Florian, C., Serra, P., & Diaspro, A. (2015) · Scientific Reports · doi:10.1038/srep16199 · Cited by 36
Self-citationIsolated node engineering of neuronal systems using laser direct write
Curley, J. L., Sklare, S. C., Bowser, D. A., Saksena, J., Moore, M. J., & Chrisey, D. B. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015013 · Cited by 36
Metallic Foil-Assisted Laser Cell Printing
Lin, Y., Huang, Y. H., & Chrisey, D. B. (2010) · Journal of Biomechanical Engineering · doi:10.1115/1.4003132 · Cited by 34
Single step high-speed printing of continuous silver lines by laser-induced forward transfer
Puerto, D., Biver, É., Alloncle, A., et al. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.017 · Cited by 33
A polyphenol biosensor realized by laser printing technology
Touloupakis, E., Chatzipetrou, M., Boutopoulos, C., Gkouzou, A., & Zergioti, I. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.11.110 · Cited by 32
Winter, S., Zenou, M., & Kotler, Z. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/16/165310 · Cited by 27
Sacrificial-layer free transfer of mammalian cells using near infrared femtosecond laser pulses
Zhang, J., Hartmann, B., Siegel, J., Marchi, G., Clausen‐Schaumann, H., Sudhop, S., & Huber, H. P. (2018) · PLoS ONE · doi:10.1371/journal.pone.0195479 · Cited by 26
Liquids microprinting through a novel film-free femtosecond laser based technique
Patrascioiu, A., Duocastella, M., Fernández-Pradas, J. M., Morenza, J. L., & Serra, P. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.093 · Cited by 23
Self-citationFeinaeugle, M., Sones, C. L., Koukharenko, E., Gholipour, B., Hewak, D. W., & Eason, R. W. (2012) · Applied Physics A · doi:10.1007/s00339-012-7491-4 · Cited by 21
Bubble Formation Modeling During Laser Direct Writing of Glycerol Solutions
Xiong, R., Zhang, Z., Shen, J., Lin, Y., Huang, Y. H., & Chrisey, D. B. (2014) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4029264 · Cited by 21
Tien, A.-C., Sacks, Z. S., & Mayer, F. J. (2001) · Microelectronic Engineering · doi:10.1016/s0167-9317(00)00496-2 · Cited by 20
Dinca, V. C., Mattle, T., Palla-Papavlu, A., Rusen, L., Luculescu, C. R., Lippert, T. K., & Dinescu, M. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.052 · Cited by 13
Modeling of Thermoelastic Stress Wave in Laser-Assisted Cell Direct Writing
Wang, W., Lin, Y., & Huang, Y. H. (2011) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4003612 · Cited by 10
Construction of 2D and 3D biomolecules structures using fs lasers
Farsari, M., Dinca, V. C., Dinescu, M., Georgiou, S. K., & Fotakis, C. (2007) · International Journal of Nanomanufacturing · doi:10.1504/ijnm.2007.017994 · Cited by 3
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Wu, K.-J., Tse, E. C. M., Shang, C., & Guo, Z. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100821 · Cited by 400
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Metadata
- Authors
- Serra, P., & Piqué, A.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2018-08-08
- Volume
- 4
- Issue
- 1
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2885776607
- Cited by
- 358
- References
- 118
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.