The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Multilayered PdSe2/Perovskite Schottky Junction for Fast, Self‐Powered, Polarization‐Sensitive, Broadband Photodetectors, and Image Sensor Application
Open accessAbstract
Group‐10 transition metal dichalcogenides (TMDs) with distinct optical and tunable electrical properties have exhibited great potential for various optoelectronic applications. Herein, a self‐powered photodetector is developed with broadband response ranging from deep ultraviolet to near‐infrared by combining FA 1−xCsxPbI 3 perovskite with PdSe 2 layer, a newly discovered TMDs material. Optoelectronic characterization reveals that the as‐assembled PdSe 2/perovskite Schottky junction is sensitive to light illumination ranging from 200 to 1550 nm, with the highest sensitivity centered at ≈800 nm. The device also shows a large on/off ratio of ≈10 4, a high responsivity (R) of 313 mA W−1, a decent specific detectivity (D*) of ≈10 13 Jones, and a rapid response speed of 3.5/4 µs. These figures of merit are comparable with or much better than most of the previously reported perovskite detectors. In addition, the PdSe 2/perovskite device exhibits obvious sensitivity to polarized light, with a polarization sensitivity of 6.04. Finally, the PdSe 2/perovskite detector can readily record five “P,” “O,” “L,” “Y,” and “U” images sequentially produced by 808 nm. These results suggest that the present PdSe 2/perovskite Schottky junction photodetectors may be useful for assembly of optoelectronic system applications in near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photodetectors based on graphene, other two-dimensional materials and hybrid systems
Koppens, F. H. L., Mueller, T., Avouris, P., Ferrari, A. C., Vitiello, M. S., & Polini, M. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.215 · Cited by 3,828
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination
Fang, Y., Dong, Q., Shao, Y., Yuan, Y., & Huang, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.156 · Cited by 1,470
High-efficiency perovskite–polymer bulk heterostructure light-emitting diodes
Zhao, B., Bai, S., Kim, V., Lamboll, R., Shivanna, R., Auras, F., Richter, J. M., Yang, L., Dai, L., Alsari, M., et al. (2018) · Nature Photonics · doi:10.1038/s41566-018-0283-4 · Cited by 886
High‐Performance Perovskite–Graphene Hybrid Photodetector
Lee, Y., Kwon, J., Hwang, E., Ra, C., Yoo, W. J., Ahn, J., Park, J. H., & Cho, J. H. (2015) · Advanced Materials · doi:10.1002/adma.201402271 · Cited by 861
PdSe2: Pentagonal Two-Dimensional Layers with High Air Stability for Electronics
Oyedele, A. D., Yang, S., Liang, L., Puretzky, A. A., Wang, K., Zhang, J., Yu, P., Pudasaini, P. R., Ghosh, A. W., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04865 · Cited by 766
Graphene‐β‐Ga2O3 Heterojunction for Highly Sensitive Deep UV Photodetector Application
Kong, W., Wu, G., Wang, K., Zhang, T., Zou, Y., Wang, D., & Luo, L. (2016) · Advanced Materials · doi:10.1002/adma.201604049 · Cited by 726
Self-citationLateral MoS2 p–n Junction Formed by Chemical Doping for Use in High-Performance Optoelectronics
Choi, M. S., Qu, D., Lee, D., Liu, X., Watanabe, K., Taniguchi, T., & Yoo, W. J. (2014) · ACS Nano · doi:10.1021/nn503284n · Cited by 588
Cited by
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Wu, D., Guo, C., Zeng, L., Ren, X., Shi, Z., Wen, L., Chen, Q., Zhang, M., Li, X. J., Shan, C.-X., et al. (2023) · Light: Science & Applications · doi:10.1038/s41377-022-01047-5 · Cited by 404
Self-citationRecent Progress on Electrical and Optical Manipulations of Perovskite Photodetectors
Wang, F., Zou, X., Xu, M., Wang, H., Wang, H., Guo, H., Guo, J., Wang, P., Peng, M., Wang, Z., et al. (2021) · Advanced Science · doi:10.1002/advs.202100569 · Cited by 315
Recent Progress on 2D Noble‐Transition‐Metal Dichalcogenides
Pi, L., Li, L., Liu, K., Zhang, Q., Li, H., & Zhai, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904932 · Cited by 309
Zeng, L., Han, W., Ren, X., Li, X., Wu, D., Liu, S., Wang, H., Lau, S. P., Tsang, Y. H., Shan, C.-X., et al. (2023) · Nano Letters · doi:10.1021/acs.nanolett.3c02396 · Cited by 291
Self-citationWang, H., Li, Z., Li, D., Chen, P., Pi, L., Zhou, X., & Zhai, T. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103106 · Cited by 274
Zhang, Z.-X., Li, C., Lu, Y., Tong, X.-W., Liang, F.-X., Zhao, X.-Y., Wu, D., Xie, C., & Luo, L.-B. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b02390 · Cited by 271
Self-citationRecent Advances in Perovskite Photodetectors for Image Sensing
Li, L., Ye, S., Qu, J., Zhou, F., Song, J., & Shen, G. (2021) · Small · doi:10.1002/smll.202005606 · Cited by 235
Mid-infrared semimetal polarization detectors with configurable polarity transition
Wei, J., Xu, C., Dong, B., Qiu, C.-W., & Lee, C. (2021) · Nature Photonics · doi:10.1038/s41566-021-00819-6 · Cited by 213
Zhao, Y., Yin, X., Li, P., Ren, Z., Gu, Z., Zhang, Y., & Song, Y. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01161-y · Cited by 117
Miscellaneous and Perspicacious: Hybrid Halide Perovskite Materials Based Photodetectors and Sensors
Yu, X., Tsao, H. N., Zhang, Z., & Gao, P. (2020) · Advanced Optical Materials · doi:10.1002/adom.202001095 · Cited by 82
Self-citationSplit-Ring Structured All-Inorganic Perovskite Photodetector Arrays for Masterly Internet of Things
Shi, B., Wang, P., Feng, J., Xue, C., Yang, G., Liao, Q., Zhang, M., Zhang, X., Wen, W., & Wu, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-022-00961-y · Cited by 43
Wu, J., Zhang, X., Wang, Z., Liang, L., Niu, X., Guan, Q., You, S., & Luo, J. (2023) · Materials Horizons · doi:10.1039/d2mh01287a · Cited by 26
Metadata
- Authors
- Zeng, L., Chen, Q., Zhang, Z., Wu, D., Yuan, H., Li, Y., Qarony, W., Lau, S. P., Luo, L., & Tsang, Y. H.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-08-07
- Volume
- 6
- Issue
- 19
- Pages
- 1901134-1901134
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2967529249
- Cited by
- 465
- References
- 58
- FWCI
- 18.93
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.