The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Highly Stretchable and Self‐Healable MXene/Polyvinyl Alcohol Hydrogel Electrode for Wearable Capacitive Electronic Skin
Abstract
Capacitive strain sensors could become an important component of electronic skin (E‐skin) due to their low hysteresis and high linearity. However, to fully mimic the functionality of human skin, a capacitive strain sensor should be stretchable and self‐healable. The development of such a sensor is limited by electrode materials which generally lack self‐healability and/or stretchability. A highly stretchable and self‐healing MXene (Ti 3 C 2 Tx)/polyvinyl alcohol (PVA) hydrogel electrode is developed for use in capacitive strain sensors for E‐skin. The incorporation of MXene into the PVA enhances the conductivity and self‐healability of the hydrogel. The electrode exhibits high stretchability at break (≈1200%) and instantaneous self healing (healing time ≈ 0.15 s). A capacitive sensor based on these electrodes shows high linearity, up to 200%, low hysteresis, a sensitivity of ≈0.40, and good mechanical durability (a 5.8% reduction in relative capacitance change after 10 000 cycles). Moreover, this sensor maintains its performance after a self‐healing test, proving its potential for the monitoring of human motion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance
Zhao, M., Ren, C. E., Ling, Z., Lukatskaya, M. R., Zhang, C., Van Aken, K. L., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404140 · Cited by 1,426
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,314
Sun, J., Keplinger, C., Whitesides, G. M., & Suo, Z. (2014) · Advanced Materials · doi:10.1002/adma.201403441 · Cited by 1,198
MXene molecular sieving membranes for highly efficient gas separation
Ding, L., Wei, Y., Li, L., Zhang, T., Wang, H., Xue, J., Ding, L.-X., Wang, S., Caro, J., & Gogotsi, Y. (2018) · Nature Communications · doi:10.1038/s41467-017-02529-6 · Cited by 1,124
Tough and Water‐Insensitive Self‐Healing Elastomer for Robust Electronic Skin
Kang, J., Son, D., Wang, G. N., Liu, Y., Lopez, J., Kim, Y., Oh, J. Y., Katsumata, T., Mun, J., Lee, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706846 · Cited by 1,124
Lee, P., Lee, J., Lee, H., Yeo, J., Hong, S., Nam, K. H., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Advanced Materials · doi:10.1002/adma.201200359 · Cited by 1,064
Charge- and Size-Selective Ion Sieving Through Ti3C2Tx MXene Membranes
Ren, C. E., Hatzell, K. B., Alhabeb, M., Ling, Z., Mahmoud, K. A., & Gogotsi, Y. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01895 · Cited by 1,030
Lei, Z., Wang, Q., Sun, S., Zhu, W., & Wu, P. (2017) · Advanced Materials · doi:10.1002/adma.201700321 · Cited by 1,015
Cited by
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
MXene hydrogels: fundamentals and applications
Zhang, Y.-Z., El-Demellawi, J. K., Jiang, Q., Ge, G., Liang, H., Lee, K., Dong, X., & Alshareef, H. N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00022a · Cited by 743
MXene/Polymer Membranes: Synthesis, Properties, and Emerging Applications
Gao, L., Li, C., Huang, W., Mei, S., Lin, H., Ou, Q., Zhang, Y., Guo, J., Zhang, F., Xu, S., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04408 · Cited by 682
Development of Conductive Hydrogels for Fabricating Flexible Strain Sensors
Li, G., Li, C., Li, G., Yu, D., Song, Z., Wang, H., Liu, X., Liu, H., & Liu, W. (2022) · Small · doi:10.1002/smll.202101518 · Cited by 509
Yao, X., Zhang, S., Qian, L., Wei, N., Nica, V., Coseri, S., & Han, F. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204565 · Cited by 487
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482
Chaudhary, V., Kaushik, A., Furukawa, H., & Khosla, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5ac6 · Cited by 386
Yang, Y., Yang, Y., Cao, Y., Wang, X., Chen, Y., Liu, H., Gao, Y., Wang, J., Liu, C., Wang, W., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126431 · Cited by 345
Self-citationZarei, M., Lee, G., Lee, S. G., & Cho, K. (2023) · Advanced Materials · doi:10.1002/adma.202203193 · Cited by 345
Afroj, S., Tan, S., Abdelkader, A. M., Novoselov, K. S., & Karim, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000293 · Cited by 317
Liu, H., Wang, X., Cao, Y., Yang, Y., Yang, Y., Gao, Y., Ma, Z., Wang, J., Wang, W., & Wu, D. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06067 · Cited by 300
Self-citationProgress and challenges in fabrication of wearable sensors for health monitoring
Nasiri, S., & Khosravani, M. R. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112105 · Cited by 295
Recent Progress in Flexible Pressure Sensors Based Electronic Skin
Pierre Claver, U., & Zhao, G. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001187 · Cited by 291
Ionogels: Preparation, Properties and Applications
Yan, C., Li, W., Liu, Z., Zheng, S., Hu, Y., Zhou, Y., Guo, J., Ou, X., Li, Q., Yu, J., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314408 · Cited by 288
A review of etching methods of MXene and applications of MXene conductive hydrogels
Zhou, C., Zhao, X., Xiong, Y., Tang, Y., Ma, X., Tao, Q., Sun, C., & Xu, W. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111063 · Cited by 287
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
Self‐Healing Hydrogel Bioelectronics
Li, Z., Lu, J., Ji, T., Xue, Y., Zhao, L., Zhao, K., Jia, B., Wang, B., Wang, J., Zhang, S., et al. (2024) · Advanced Materials · doi:10.1002/adma.202306350 · Cited by 257
Stimuli-responsive functional materials for soft robotics
Shen, Z., Chen, F., Zhu, X., Yong, K.-T., & Gu, G. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01585g · Cited by 255
Wearable Sensors for Monitoring Human Motion: A Review on Mechanisms, Materials, and Challenges
Homayounfar, S. Z., & Andrew, T. L. (2020) · SLAS TECHNOLOGY · doi:10.1177/2472630319891128 · Cited by 227
Metadata
- Authors
- Zhang, J., Wan, L., Gao, Y., Fang, X., Lu, T., Pan, L., & Xuan, F.
- Venue
- Advanced Electronic Materials
- Publisher
- Wiley
- Published
- 2019-05-23
- Volume
- 5
- Issue
- 7
- ISSN
- 2199-160X (ISSN-L)
- OpenAlex
- W2945395507
- Cited by
- 422
- References
- 57
- FWCI
- 15.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.