The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries
Abstract
LiNixCoyMnzO 2 (NCM, 0 ≤ x,y,z < 1) has become one of the most important cathode materials for next‐generation lithium (Li) ion batteries due to its high capacity and cost effectiveness compared with LiCoO 2. However, the high‐voltage operation of NCM (>4.3 V) required for high capacity is inevitably accompanied by a more rapid capacity fade over numerous cycles. Here, the degradation mechanisms of LiNi 0.5 Co 0.2 Mn 0.3 O 2 are investigated during cycling under various cutoff voltage conditions. The surface lattice structures of LiNi 0.5 Co 0.2 Mn 0.3 O 2 are observed to suffer from an irreversible transformation; the type of transformation depends on the cutoff voltage conditions. The surface of the pristine rhombohedral phase tends to transform into a mixture of spinel and rock salt phases. Moreover, the formation of the rock salt phase is more dominant under a higher voltage operation (≈4.8 V), which is attributable to the highly oxidative environment that triggers the oxygen loss from the surface of the material. The presence of the ionically insulating rock salt phase may result in sluggish kinetics, thus deteriorating the capacity retention. This implies that the prevention of surface structural degradation can provide the means to produce and retain high capacity, as well as stabilize the cycle life of LiNi 0.5 Co 0.2 Mn 0.3 O 2 during high‐voltage operations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Self-citationWinPLOTR: A Windows Tool for Powder Diffraction Pattern Analysis
Roisnel, T., & Rodríquez-Carvajal, J. (2001) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.378-381.118 · Cited by 2,073
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries
Armstrong, A. R., & Bruce, P. G. (1996) · Nature · doi:10.1038/381499a0 · Cited by 1,438
Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
Shaju, K. M., Subba Rao, G. V., & Chowdari, B. V. R. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00593-5 · Cited by 988
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Rougier, A., Gravereau, P., & Delmas, C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836614 · Cited by 609
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Zheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Layered-to-Spinel Phase Transition in Li[sub x]MnO[sub 2]
Reed, J., Ceder, G., & der Ven, A. V. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1368896 · Cited by 340
Hong, J., Lim, H.-D., Lee, M., Kim, S.-W., Kim, H., Oh, S.-T., Chung, G.-C., & Kang, K. (2012) · Chemistry of Materials · doi:10.1021/cm3005634 · Cited by 304
Self-citationStudies on capacity fade of lithium-ion batteries
Zhang, D., Haran, B. S., Durairajan, A., White, R. E., Podrazhansky, Y., & Popov, B. N. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00469-9 · Cited by 299
Choi, J., & Manthiram, A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1954927 · Cited by 291
Yin, S.-C., Rho, Y.-H., Swainson, I., & Nazar, L. F. (2006) · Chemistry of Materials · doi:10.1021/cm0511769 · Cited by 280
A modified ZrO2-coating process to improve electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2
Huang, Y., Chen, J., Ni, J., Zhou, H., & Zhang, X. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.037 · Cited by 152
Investigation of positive electrodes after cycle testing of high-power Li-ion battery cells
Kobayashi, H., Shikano, M., Koike, S., Sakaebe, H., & Tatsumi, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.134 · Cited by 83
Cited by
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Self-citation
Metadata
- Authors
- Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2013-08-21
- Volume
- 4
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W1948021995
- Cited by
- 1,124
- References
- 22
- FWCI
- 25.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.