The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Fe‐N‐C Oxygen Reduction Fuel Cell Catalyst Derived from Carbendazim: Synthesis, Structure, and Reactivity
Abstract
New non‐PGM catalysts from the family of Fe‐N‐C pyrolyzed materials are reported. They are synthesized using a templating silica powder with iron nitrate and carbendazim (CBDZ) precursors (sacrificial support method). The synthesis involves high temperature pyrolysis, followed by etching of the sacrificial support (silica) and obtaining a “self‐supported” open frame morphology catalyst. Both the temperature of heat treatment and Fe to CBDZ ratio play a crucial role in the final catalytic activity in oxygen reduction reaction (ORR). Prepared materials have extremely high durability in RDE tests, ending up with more than 94% of initial activity (by E1/2 value) after 10 000 cycles in an oxygen atmosphere, which is the result we report for the first time. Evaluation of these new M‐N‐C catalysts in a single membrane electrode assembly (MEA) has shown an exceptionally high open circuit voltage (OCV) of 1 V and the world's second best performance with no IR correction. MEA tests have shown high current density of 700 mA cm‐2 at 0.6 V and 120 mA cm‐2 at 0.8 V. In‐depth structure‐to‐property correlation presents an evidence that Fe‐Nx centers are the active sites playing a key role in oxygen reduction reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt
Wu, G., More, K. L., Johnston, C. M., & Zelenay, P. (2011) · Science · doi:10.1126/science.1200832 · Cited by 3,984
Jaouen, F., Proietti, E., Lefèvre, M., Chenitz, R., Dodelet, J.-P., Wu, G., Chung, H. T., Johnston, C. M., & Zelenay, P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00011f · Cited by 1,588
Palladium in fuel cell catalysis
Antolini, E. (2009) · Energy & Environmental Science · doi:10.1039/b820837a · Cited by 1,100
Gölitz, P. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209858 · Cited by 922
Structure of the catalytic sites in Fe/N/C-catalysts for O2-reduction in PEM fuel cells
Kramm, U. I., Herranz, J., Larouche, N., Arruda, T. M., Lefèvre, M., Jaouen, F., Bogdanoff, P., Fiechter, S., Abs-Wurmbach, I., Mukerjee, S., et al. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp41957b · Cited by 714
Heat-treated polyacrylonitrile-based catalysts for oxygen electroreduction
Gupta, S., Tryk, D., Bae, I., Aldred, W., & Yeager, E. (1989) · Journal of Applied Electrochemistry · doi:10.1007/bf01039385 · Cited by 666
Organic dyestuffs as catalysts for fuel cells
Jahnke, H., Schönborn, M., & Zimmermann, G. (2006) · Topics in Current Chemistry · doi:10.1007/bfb0046059 · Cited by 436
Artyushkova, K., Kiefer, B., Halevi, B., Knop-Gericke, A., Schlogl, R., & Atanassov, P. (2013) · Chemical Communications · doi:10.1039/c3cc40324f · Cited by 430
Self-citationKoslowski, U. I., Abs-Wurmbach, I., Fiechter, S., & Bogdanoff, P. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp802456e · Cited by 384
Cheon, J. Y., Kim, T., Choi, Y., Jeong, H. Y., Kim, M. G., Sa, Y. J., Kim, J., Lee, Z., Yang, T.-H., Kwon, K., et al. (2013) · Scientific Reports · doi:10.1038/srep02715 · Cited by 299
Cited by
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Microbial fuel cells: From fundamentals to applications. A review
Santoro, C., Arbizzani, C., Erable, B., & Ieropoulos, I. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.109 · Cited by 1,781
Jiang, W.-J., Gu, L., Li, L., Zhang, Y., Zhang, X., Zhang, L.-J., Wang, J.-Q., Hu, J.-S., Wei, Z., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00757 · Cited by 1,765
Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst
Chung, H. T., Cullen, D. A., Higgins, D., Sneed, B. T., Holby, E. F., More, K. L., & Zelenay, P. (2017) · Science · doi:10.1126/science.aan2255 · Cited by 1,684
Zhang, H., Hwang, S., Wang, M., Feng, Z., Karakalos, S., Luo, L., Qiao, Z., Xie, X., Wang, C., Su, D., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06514 · Cited by 1,526
Materials, technological status, and fundamentals of PEM fuel cells – A review
Wang, Y., Ruiz Diaz, D. F., Chen, K. S., Wang, Z., & Adroher, X. C. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.005 · Cited by 1,419
Advanced Electrocatalysts with Single-Metal-Atom Active Sites
Wang, Y., Su, H., He, Y., Li, L., Zhu, S., Shen, H., Xie, P., Fu, X., Zhou, G., Feng, C., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00594 · Cited by 1,005
He, Y., Liu, S., Priest, C., Shi, Q., & Wu, G. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00903e · Cited by 771
Sa, Y. J., Seo, D.-J., Woo, J., Lim, J. T., Cheon, J. Y., Yang, S. Y., Lee, J. M., Kang, D., Shin, T. J., Shin, H. S., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09470 · Cited by 746
Single atom electrocatalysts supported on graphene or graphene-like carbons
Fei, H., Dong, J., Chen, D., Hu, T., Duan, X., Shakir, I., Huang, Y., & Duan, X. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00422j · Cited by 673
Niu, W., Li, L., Liu, X., Wang, N., Liu, J., Zhou, W., Tang, Z., & Chen, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02027 · Cited by 672
Mehmood, A., Gong, M., Jaouen, F., Roy, A., Zitolo, A., Khan, A., Sougrati, M.-T., Primbs, M., Bonastre, A. M., Fongalland, D., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00772-9 · Cited by 637
Xiao, F., Wang, Y., Wu, Z., Chen, G., Yang, F., Zhu, S., Siddharth, K., Kong, Z., Lu, A., Li, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006292 · Cited by 614
Li, J., Zhang, H., Samarakoon, W., Shan, W., Cullen, D. A., Karakalos, S., Chen, M., Gu, D., More, K. L., Wang, G., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201909312 · Cited by 558
Artyushkova, K., Serov, A., Rojas-Carbonell, S., & Atanassov, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b07653 · Cited by 536
Self-citationHiggins, D., Zamani, P., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02474a · Cited by 525
Liang, J., Zhou, R. F., Chen, X. M., Tang, Y. H., & Qiao, S. Z. (2014) · Advanced Materials · doi:10.1002/adma.201401848 · Cited by 522
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Wang, Z., Jin, H., Meng, T., Liao, K., Meng, W., Yang, J., He, D., Xiong, Y., & Mu, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802596 · Cited by 498
Shen, H., Gracia‐Espino, E., Ma, J., Zang, K., Luo, J., Wang, L., Gao, S., Mamat, X., Hu, G., Wagberg, T., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201706602 · Cited by 482
Zeng, X., Shui, J., Liu, X., Liu, Q., Li, Y., Shang, J., Zheng, L., & Yu, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701345 · Cited by 466
Progress in the Development of Fe‐Based PGM‐Free Electrocatalysts for the Oxygen Reduction Reaction
Martinez, U., Komini Babu, S., Holby, E. F., Chung, H. T., Yin, X., & Zelenay, P. (2019) · Advanced Materials · doi:10.1002/adma.201806545 · Cited by 464
Han, Y., Wang, Y., Xu, R., Chen, W., Zheng, L., Han, A., Zhu, Y., Zhang, J., Zhang, H., Luo, J., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01481g · Cited by 457
Electrochemical Reduction of CO2 on Metal-Nitrogen-Doped Carbon Catalysts
Varela, A. S., Ju, W., Bagger, A., Franco, P., Rossmeisl, J., & Strasser, P. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b01405 · Cited by 390
Ding, W., Li, L., Xiong, K., Wang, Y., Li, W., Nie, Y., Chen, S., Qi, X., & Wei, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00292 · Cited by 381
Ma, L., Chen, S., Pei, Z., Huang, Y., Liang, G., Mo, F., Yang, Q., Su, J., Gao, Y., Zapien, J. A., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b09064 · Cited by 379
Ma, J., Yang, Q., Wen, Y., & Liu, W. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.08.048 · Cited by 342
Primbs, M., Sun, Y., Roy, A., Malko, D., Mehmood, A., Sougrati, M.-T., Blanchard, P.-Y., Granozzi, G., Kosmala, T., Daniel, G., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01013h · Cited by 323
Self-citationShen, H., Gracia-Espino, E., Ma, J., Tang, H., Mamat, X., Wagberg, T., Hu, G., & Guo, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.03.027 · Cited by 314
Zhu, C., Fu, S., Song, J., Shi, Q., Su, D., Engelhard, M. H., Li, X., Xiao, D., Li, D., Estevez, L., et al. (2017) · Small · doi:10.1002/smll.201603407 · Cited by 292
You, S., Gong, X., Wang, W., Qi, D., Wang, X., Chen, X., & Ren, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501497 · Cited by 284
Miao, Z., Wang, X., Tsai, M., Jin, Q., Liang, J., Ma, F., Wang, T., Zheng, S., Hwang, B., Huang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801226 · Cited by 256
Emerging new generation electrocatalysts for the oxygen reduction reaction
Raj, C. R., Samanta, A., Noh, S. H., Mondal, S., Okajima, T., & Ohsaka, T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03300h · Cited by 201
Metadata
- Authors
- Serov, A., Artyushkova, K., & Atanassov, P.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-03-20
- Volume
- 4
- Issue
- 10
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2118015383
- Cited by
- 402
- References
- 31
- FWCI
- 14.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.