The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
A Flexible Porous Carbon Nanofibers‐Selenium Cathode with Superior Electrochemical Performance for Both Li‐Se and Na‐Se Batteries
Abstract
A flexible and free‐standing porous carbon nanofibers/selenium composite electrode (Se@PCNFs) is prepared by infiltrating Se into mesoporous carbon nanofibers (PCNFs). The porous carbon with optimized mesopores for accommodating Se can synergistically suppress the active material dissolution and provide mechanical stability needed for the film. The Se@PCNFs electrode exhibits exceptional electrochemical performance for both Li‐ion and Na‐ion storage. In the case of Li‐ion storage, it delivers a reversible capacity of 516 mAh g−1 after 900 cycles without any capacity loss at 0.5 A g−1. Se@PCNFs still delivers a reversible capacity of 306 mAh g−1 at 4 A g−1. While being used in Na‐Se batteries, the composite electrode maintains a reversible capacity of 520 mAh g−1 after 80 cycles at 0.05 A g−1 and a rate capability of 230 mAh g−1 at 1 A g−1. The high capacity, good cyclability, and rate capability are attributed to synergistic effects of the uniform distribution of Se in PCNFs and the 3D interconnected PCNFs framework, which could alleviate the shuttle reaction of polyselenides intermediates during cycling and maintain the perfect electrical conductivity throughout the electrode. By rational and delicate design, this type of self‐supported electrodes may hold great promise for the development of Li‐Se and Na‐Se batteries with high power and energy densities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Hollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Self-citationThe Spinel Phase of LiMn2 O 4 as a Cathode in Secondary Lithium Cells
Tarascon, J., Wang, E., Shokoohi, F. K., McKinnon, W. R., & Colson, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085330 · Cited by 880
Comparative study of LiCoO2, LiNi Co O2 and LiNiO2 for 4 volt secondary lithium cells
Ohzuku, T., Ueda, A., Nagayama, M., Iwakoshi, Y., & Komori, H. (1993) · Electrochimica Acta · doi:10.1016/0013-4686(93)80046-3 · Cited by 799
Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life
Cao, Y., Xiao, L., Wang, W., Choi, D., Nie, Z., Yu, J., Saraf, L. V., Yang, Z., & Liu, J. (2011) · Advanced Materials · doi:10.1002/adma.201100904 · Cited by 708
High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Abouimrane, A., Dambournet, D., Chapman, K. W., Chupas, P. J., Weng, W., & Amine, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211766q · Cited by 628
Issue and challenges facing rechargeable thin film lithium batteries
Patil, A., Patil, V., Wook Shin, D., Choi, J.-W., Paik, D.-S., & Yoon, S.-J. (2008) · Materials Research Bulletin · doi:10.1016/j.materresbull.2007.08.031 · Cited by 601
Yu, Y., Gu, L., Wang, C., Dhanabalan, A., van Aken, P. A., & Maier, J. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200901723 · Cited by 568
Self-citationPeng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
An Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
Self-citationSelenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Self-citationYu, Y., Gu, L., Zhu, C., van Aken, P. A., & Maier, J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906261c · Cited by 429
Self-citationLu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
Li, X., Dhanabalan, A., Gu, L., & Wang, C. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100380 · Cited by 236
Zhang, Z., Li, Z., Hao, F., Wang, X., Li, Q., Qi, Y., Fan, R., & Yin, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201303080 · Cited by 222
Chang, D.-R., Lee, S.-H., Kim, S.-W., & Kim, H.-T. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00418-4 · Cited by 204
Li–Se battery: absence of lithium polyselenides in carbonate based electrolyte
Cui, Y., Abouimrane, A., Sun, C.-J., Ren, Y., & Amine, K. (2014) · Chem. Commun. · doi:10.1039/c4cc00934g · Cited by 187
Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries
Xu, R., Belharouak, I., Li, J. C. M., Zhang, X., Bloom, I., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200990 · Cited by 184
Li, X., & Wang, C. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00437b · Cited by 179
Zheng, S., Han, P., Han, Z., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400226 · Cited by 136
Han, K., Liu, Z., Ye, H., & Dai, F. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.027 · Cited by 124
A Stabilized PAN‐FeS 2 Cathode with an EC/DEC Liquid Electrolyte
Son, S., Yersak, T. A., Piper, D. M., Kim, S. C., Kang, C. S., Cho, J. S., Suh, S., Kim, Y., Oh, K. H., & Lee, S. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300961 · Cited by 107
Kundu, D. K., Krumeich, F., & Nesper, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.050 · Cited by 103
Song, J., Yu, Z., Xu, T., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00742e · Cited by 97
Sulfur@hollow polypyrrole sphere nanocomposites for rechargeable Li–S batteries
Dong, Z., Zhang, J., Zhao, X., Tu, J. P., Su, Q., & Du, G. (2013) · RSC Advances · doi:10.1039/c3ra45683h · Cited by 66
Liu, L., Hou, Y., Yang, Y., Li, M., Wang, X., & Wu, Y. (2014) · RSC Advances · doi:10.1039/c3ra48034h · Cited by 62
Cited by
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Conversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Metadata
- Authors
- Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-11-12
- Volume
- 5
- Issue
- 4
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2086682020
- Cited by
- 285
- References
- 40
- FWCI
- 11.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.