The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Abstract
High energy and cost‐effective lithium sulfur (Li–S) battery technology has been vigorously revisited in recent years due to the urgent need of advanced energy storage technologies for green transportation and large‐scale energy storage applications. However, the market penetration of Li–S batteries has been plagued due to the gap in scientific knowledge between the fundamental research and the real application need. Here, a facile and effective approach to integrate commercial carbon nanoparticles into microsized secondary ones for application in high loading sulfur electrodes is proposed The slurry with the integrated particles is easily cast into electrode laminates with practically usable mass loadings. Uniform and crack‐free coating with high loading of 2–8 mg cm−2 sulfur are successfully achieved. Based on the obtained thick electrodes, the dependence of areal specific capacity on mass loading, factors influencing electrode performance, and measures used to address the existing issues are studied and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationLithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Self-citationSong, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Self-citationRole of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Self-citationZheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Self-citationLiu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
Self-citationPorous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Self-citationEvers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Zhou, W., Xiao, X., Cai, M., & Yang, L. (2014) · Nano Letters · doi:10.1021/nl502238b · Cited by 382
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Self-citationManipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Self-citationLithium-air and lithium-sulfur batteries
Bruce, P. G., Hardwick, L. J., & Abraham, K. M. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.157 · Cited by 300
Dörfler, S., Hagen, M., Althues, H., Tübke, J., Kaskel, S., & Hoffmann, M. J. (2012) · Chemical Communications · doi:10.1039/c2cc17925c · Cited by 299
Lithium‐Sulfur Battery: Evaluation of Dioxolane‐Based Electrolytes
Peled, E., Sternberg, Y., Gorenshtein, A., & Lavi, Y. (1989) · Journal of The Electrochemical Society · doi:10.1149/1.2096981 · Cited by 289
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Ionic liquid-enhanced solid state electrolyte interface (SEI) for lithium–sulfur batteries
Zheng, J., Gu, M., Chen, H., Meduri, P., Engelhard, M. H., Zhang, J.-G., Liu, J., & Xiao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11553d · Cited by 255
Self-citationXu, T., Song, J., Gordin, M. L., Sohn, H., Yu, Z., Chen, S., & Wang, D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4035784 · Cited by 238
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., & Zhang, X. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201202127 · Cited by 223
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Low Temperature Performance of Li/S Batteries
Mikhaylik, Y., & Akridge, J. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1545452 · Cited by 162
Hagen, M., Dörfler, S., Fanz, P., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.004 · Cited by 154
Cheon, S.-E., Cho, J., Ko, K.-S., et al. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1511187 · Cited by 123
Key Parameters Governing the Energy Density of Rechargeable Li/S Batteries
Gao, J., & Abruña, H. D. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5001819 · Cited by 113
Why PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Revisit Carbon/Sulfur Composite for Li-S Batteries
Zheng, J., Gu, M. D., Wagner, M. J., Hays, K. A., Li, X., Zuo, P., Wang, C., Zhang, J., Liu, J., & Xiao, J. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.013310jes · Cited by 109
Self-citationShin, J. H., & Cairns, E. J. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2869876 · Cited by 106
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Metadata
- Authors
- Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., Liu, J., & Xiao, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-03-09
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2063765086
- Cited by
- 554
- References
- 53
- FWCI
- 36.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.