The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Abstract
Unreacted lead iodide is commonly believed to be beneficial to the efficiency of methylammonium lead iodide perovskite based solar cells, since it has been proposed to passivate the defects in perovskite grain boundaries. However, it is shown here that the presence of unreacted PbI 2 results in an intrinsic instability of the film under illumination, leading to the film degradation under inert atmosphere and faster degradation upon exposure to illumination and humidity. The perovskite films without lead iodide have improved stability, but lower efficiency due to inferior film morphology (smaller grain size, the presence of pinholes). Optimization of the deposition process resulted in PbI 2‐free perovskite films giving comparable efficiency to those with excess PbI 2 (14.2 ± 1.3% compared to 15.1 ± 0.9%) Thus, optimization of the deposition process for PbI 2‐free films leads to dense, pinhole‐free, large grain size perovskite films which result in cells with high efficiency without detrimental effects on the film photostability caused by excess PbI 2. However, it should be noted that for encapsulated devices illuminated through the substrate (fluorine‐doped tin oxide glass, TiO 2 film), film photostability is not a key factor in the device degradation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Laban, W. A., & Etgar, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42282h · Cited by 759
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Wang, L., McCleese, C., Kovalsky, A., Zhao, Y., & Burda, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504632z · Cited by 571
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Self-citationZhao, C., Chen, B., Qiao, X., Luan, L., Lu, K., & Hu, B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500279 · Cited by 334
Ko, H.-S., Lee, J.-W., & Park, N.-G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00658a · Cited by 334
Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?
Cao, D. H., Stoumpos, C. C., Malliakas, C. D., Katz, M. J., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2014) · APL Materials · doi:10.1063/1.4895038 · Cited by 297
Zhang, T., Yang, M., Zhao, Y., & Zhu, K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00843 · Cited by 270
Zhao, Y., & Zhu, K. (2014) · Chemical Communications · doi:10.1039/c3cc48522f · Cited by 199
Luo, P., Liu, Z., Xia, W., Yuan, C., Cheng, J., & Lu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5077588 · Cited by 193
Atomistic origins of CH3NH3PbI3 degradation to PbI2 in vacuum
Deretzis, I., Alberti, A., Pellegrino, G., Smecca, E., Giannazzo, F., Sakai, N., Miyasaka, T., & La Magna, A. (2015) · Applied Physics Letters · doi:10.1063/1.4916821 · Cited by 185
Gao, H., Bao, C., Li, F., Yu, T., Yang, J., Zhu, W., Zhou, X., Fu, G., & Zou, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00895 · Cited by 160
Unraveling the Reasons for Efficiency Loss in Perovskite Solar Cells
Lee, Y. H., Luo, J., Humphry‐Baker, R., Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501024 · Cited by 145
Lv, S., Pang, S., Zhou, Y., Padture, N. P., Hu, H., Wang, L., Zhou, X., Zhu, H., Zhang, L., Huang, C., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02113d · Cited by 142
O'Mahony, F. T. F., Lee, Y. H., Jellett, C., Dimitrov, S. D., Bryant, D., Durrant, J. R., O’Regan, B. C., Grätzel, M., Nazeeruddin, M. K., & Haque, S. A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01221j · Cited by 131
Organic–inorganic lead halide perovskite solar cell materials: A possible stability problem
Schoonman, J. (2014) · Chemical Physics Letters · doi:10.1016/j.cplett.2014.11.063 · Cited by 121
Thermal Assisted Oxygen Annealing for High Efficiency Planar CH3NH3PbI3 Perovskite Solar Cells
Ren, Z., Ng, A., Shen, Q., Gokkaya, H. C., Wang, J., Yang, L., Yiu, W. K., Bai, G., Djurišić, A. B., Leung, W. W., et al. (2014) · Scientific Reports · doi:10.1038/srep06752 · Cited by 116
Self-citationNg, A., Ren, Z., Shen, Q., Cheung, S. H., Gokkaya, H. C., Bai, G., Wang, J., Yang, L., So, S. K., Djurišić, A. B., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05070c · Cited by 98
Self-citation
Cited by
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Metadata
- Authors
- Liu, F., Dong, Q., Wong, M. K., Djurišić, A. B., Ng, A., Ren, Z., Shen, Q., Surya, C., Chan, W. K., Wang, J., Ng, A. M. C., Liao, C., Li, H., Shih, K., Wei, C., Su, H., & Dai, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-01-13
- Volume
- 6
- Issue
- 7
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2233240471
- Cited by
- 425
- References
- 38
- FWCI
- 23.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.