The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Abstract
Unreacted lead iodide is commonly believed to be beneficial to the efficiency of methylammonium lead iodide perovskite based solar cells, since it has been proposed to passivate the defects in perovskite grain boundaries. However, it is shown here that the presence of unreacted PbI 2 results in an intrinsic instability of the film under illumination, leading to the film degradation under inert atmosphere and faster degradation upon exposure to illumination and humidity. The perovskite films without lead iodide have improved stability, but lower efficiency due to inferior film morphology (smaller grain size, the presence of pinholes). Optimization of the deposition process resulted in PbI 2‐free perovskite films giving comparable efficiency to those with excess PbI 2 (14.2 ± 1.3% compared to 15.1 ± 0.9%) Thus, optimization of the deposition process for PbI 2‐free films leads to dense, pinhole‐free, large grain size perovskite films which result in cells with high efficiency without detrimental effects on the film photostability caused by excess PbI 2. However, it should be noted that for encapsulated devices illuminated through the substrate (fluorine‐doped tin oxide glass, TiO 2 film), film photostability is not a key factor in the device degradation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Cited by
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Wang, S., Jiang, Y., Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.195 · Cited by 661
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Origins and influences of metallic lead in perovskite solar cells
Liang, J., Hu, X., Wang, C., Liang, C., Chen, C., Xiao, M., Li, J., Tao, C., Xing, G., Yu, R., et al. (2022) · Joule · doi:10.1016/j.joule.2022.03.005 · Cited by 576
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Detrimental Effect of Unreacted PbI2 on the Long‐Term Stability of Perovskite Solar Cells
Tumen‐Ulzii, G., Qin, C., Klotz, D., Leyden, M. R., Wang, P., Auffray, M., Fujihara, T., Matsushima, T., Lee, J., Lee, S., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905035 · Cited by 466
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Self-citationHe, M., Li, B., Cui, X., Jiang, B., He, Y., Chen, Y., O’Neil, D., Szymanski, P., EI-Sayed, M. A., Huang, J., et al. (2017) · Nature Communications · doi:10.1038/ncomms16045 · Cited by 456
A general approach to high-efficiency perovskite solar cells by any antisolvent
Taylor, A. D., Sun, Q., Goetz, K. P., An, Q., Schramm, T., Hofstetter, Y., Litterst, M., Paulus, F., & Vaynzof, Y. (2021) · Nature Communications · doi:10.1038/s41467-021-22049-8 · Cited by 451
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Bai, Y., Dong, Q., Shao, Y., Deng, Y., Wang, Q., Shen, L., Wang, D., Wei, W., & Huang, J. (2016) · Nature Communications · doi:10.1038/ncomms12806 · Cited by 417
Self-citationUnderstanding how excess lead iodide precursor improves halide perovskite solar cell performance
Park, B.-W., Kedem, N., Kulbak, M., Lee, D. Y., Yang, W. S., Jeon, N. J., Seo, J., Kim, G., Kim, K. J., Shin, T. J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05583-w · Cited by 391
UV Degradation and Recovery of Perovskite Solar Cells
Lee, S.-W., Kim, S., Bae, S., Cho, K., Chung, T., Mundt, L. E., Lee, S., Park, S., Park, H., Schubert, M. C., et al. (2016) · Scientific Reports · doi:10.1038/srep38150 · Cited by 387
Kubicki, D. J., Prochowicz, D., Hofstetter, A., Zakeeruddin, S. M., Grätzel, M., & Emsley, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07223 · Cited by 387
Ibn-Mohammed, T., Koh, S. C. L., Reaney, I. M., Acquaye, A., Schileo, G., Mustapha, K. B., & Greenough, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.095 · Cited by 379
Capturing the Sun: A Review of the Challenges and Perspectives of Perovskite Solar Cells
Petrus, M. L., Schlipf, J., Li, C., Gujar, T. P., Giesbrecht, N., Müller‐Buschbaum, P., Thelakkat, M., Bein, T., Hüttner, S., & Docampo, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700264 · Cited by 374
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
Wang, S., Sakurai, T., Wen, W., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800260 · Cited by 350
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Li, W., Li, J., Li, J., Fan, J., Mai, Y., & Wang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08332c · Cited by 318
Meng, L., Sun, C., Wang, R., Huang, W., Zhao, Z., Sun, P., Huang, T., Xue, J., Lee, J.-W., Zhu, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10520 · Cited by 308
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Encapsulation of Organic and Perovskite Solar Cells: A Review
Uddin, A., Upama, M. B., Yi, H., & Duan, L. (2019) · Coatings · doi:10.3390/coatings9020065 · Cited by 290
Spanopoulos, I., Hadar, I., Ke, W., Tu, Q., Chen, M., Tsai, H., He, Y., Shekhawat, G., Dravid, V. P., Wasielewski, M. R., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b01327 · Cited by 284
Pearson, A. J., Eperon, G. E., Hopkinson, P. E., Habisreutinger, S. N., Wang, J. T., Snaith, H. J., & Greenham, N. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600014 · Cited by 256
Self-citationControl over Crystal Size in Vapor Deposited Metal-Halide Perovskite Films
Lohmann, K. B., Patel, J. B., Rothmann, M. U., Xia, C. Q., Oliver, R. D. J., Herz, L. M., Snaith, H. J., & Johnston, M. B. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00183 · Cited by 113
Lu, Y., Wei, D., Liu, W., Meng, J., Huo, X., Zhang, Y., Liang, Z., Qiao, B., Zhao, S., Song, D., et al. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.10.024 · Cited by 83
Metadata
- Authors
- Liu, F., Dong, Q., Wong, M. K., Djurišić, A. B., Ng, A., Ren, Z., Shen, Q., Surya, C., Chan, W. K., Wang, J., Ng, A. M. C., Liao, C., Li, H., Shih, K., Wei, C., Su, H., & Dai, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-01-13
- Volume
- 6
- Issue
- 7
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2233240471
- Cited by
- 425
- References
- 38
- FWCI
- 23.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.